• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.560-560
• /
• 2012

We report a one-step fabrication method of Poly(9,9-dioctylfluorene) (PFO) nanowire array with pronounced ${\beta}$-Phase. We use liquid-bridge-mediated nanotransfer molding (LB-nTM) which is a new direct nano-patterning method based on the direct transfer of various materials from a mold to a substrate via liquid layer. The formation of the ${\beta}$-phase morphology in the resulting PFO nanowire array was evidenced by the presence of an absorption peak at 435nm. With the collection polarizer oriented parallel to the wire long axis, the PL emission was most intense and an emission dichroic ratio, DRE, of 3.7 was determined. The nanowire array have been investigated by scanning electron microscopy (SEM). Also, we simply fabricated structure of device of ITO/PFO nanowire arrays/Al and the electroluminescence spectra were recorded at various applied voltage.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2006.06a
• /
• pp.129-134
• /
• 2006

In this paper, actuator based on voice coil motor is designed and estimated to check the capability whether that system is in design specification or not. Design specification is moving range as $20{\times}20mm^2$ a along XY-axis in plane and maximizes bandwidth for high speed. The type of voice coil motor is selected with regarding design specification and minimizes the size of actuator. Flux density of designed voice coil motor is simulated. And PI controller is designed to maximize bandwidth of actuator. Finally, characteristic of designed actuator is simulated and that result reveals the validity of presented design.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.5-6
• /
• 2016

Due to the construction of high-rise and long axis etc, UHPC(Ultra High Performance Concrete) has attracted attention as a material that will replace the existing concrete. In order to improve the structural performance of each member joints, after demolding the concrete, method for surface treatment of the contact surface or by modifying the mold to create a shear key will be applied. In this study, to improve the conventional shear key manufacturing process, utilizing a 3d printer to produce a shear key plate. 3D printers have advantage it is inexpensively manufactured as compared with other production methods. Therefore, this study utilizes a 3D printer, we propose the shear key-shaped mold and plate shear key production measures.

• The Journal of the Korean dental association
• /
• v.16 no.4 s.107
• /
• pp.279-282
• /
• 1978

A girl aged 16 years and I month, had a severe Angle's class III malocclusion, characterized by a retarded and constricted maxilla, anterior and posterior crossbite. This patient underwent extraction of two lower Ist premolar. After extraction, author placed multibanded system in lower dental arch to change the long axis of anterior teeth and delivered removable appliance with Coffin spring in the upper dental arch to expand dental arch. After 13 months, anterior & posterior crossbite was corrected and this patient's profile was improved. Superimposition of pretreatment and posttreatment cephalograms upon the SN line registered at S showed backward downward rotation of the mandible and retrusion of lower lip.

• The Journal of the Korean dental association
• /
• v.16 no.4 s.107
• /
• pp.273-278
• /
• 1978

A girl aged 16 years and I month, had a severe Angle's class III malocclusion, characterized by a retarded and constricted maxilla, anterior and posterior crossbite. This patient underwent extraction of two lower Ist premolar. After extraction, author placed multibanded system in lower dental arch to change the long axis of anterior teeth and delivered removable appliance with Coffin spring in the upper dental arch to expand dental arch. After 13 months, anterior & posterior crossbite was corrected and this patient's profile was improved. Superimposition of pretreatment and posttreatment cephalograms upon the SN line registered at S showed backward downward rotation of the mandible and retrusion of lower lip.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.230-234
• /
• 2006

Metal-Induced Crystallization (MIC) of amorphous silicon (a-Si) using aluminum and nickel as catalysts were performed with a variation of metal thickness and temperature. Raman results showed that the crystallization of a-Si depended on the thickness of aluminum while not on nickel. Nickel that forms silicide nodules during annealing simply catalyzed the formation of crystalline silicon (c-Si) while aluminum was consumed and transferred during MIC, which resulted in more complex microstructural characteristics. Crystalline silicons after NIC had elongated shape with a twin along the long axis. Morphological change after Aluminum-Induced Crystallization (AIC) showed more equiaxial grains. The nucleation and growth mechanism of AIC was discussed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.86-87
• /
• 2001

Far-ultraviolet IMaging Spectrograph(이하 FIMS)는 2002년에 발사 예정인 과학위성 1호의 주 탑재체이며, 은하 주변에 분포한 고온의 가스에서 방출되는 자외선 영역 (short wavelength band ： 900-1150 $\AA$, long wavelength band ： 1335-1750$\AA$)의 방출선을 약 2$\AA$의 분광 분해능으로 관측하는 천문학적 목표를 가지고 있다 일반적인 망원경을 사용하는 대신 제한된 위성의 크기 내에서, 넓은 지역에 퍼져 있는 가스의 분포와 특성을 관측하는데 적합하도록, 그림 1과 같이 비축 포물 원통 반사경과 타원형의 substrate를 가진 회절 에돌이발 (grating)의 사용을 고안하였다. (중략)

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.867-869
• /
• 2000

This paper describes the steady state performance of a self-excited wound type induction generator with stator and rotor windings connected in series along with excitation capacitors. For this purpose a mathematical model is developed by means of the well known generalized machine theory utilizing d-q axis orthogonal transformation. This model can be used to analyze short shunt and long shunt generators as well as shunt generator and the algorithm for this analysis is persented. The characteristics of generators are compared one another by using parameters which are validated by Mostafa et al.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.259-261
• /
• 1999

In this paper, we investigated the frequency dependences of AC loss and the magnetic properties of a superconductor using magnetization method. We used the YBCO bulk superconductor sample which has a square-shaped cross sectional area of $6mm{\times}6mm$. and 43mm-long in axial direction. The applied AC magnetic field was parallel to the direction of sample axis. It is observed that YBCO bulk has the diamagnetic properties. AC loss calculation of YBCO bulk superconductor was performed by evaluating the total area of magnetization traces. We performed two cases of experiments, one for $B_m<B_p$ and the other for $B_m<B_p$. The experiments showed that the AC loss dependences on frequency were different in each mode, as was indicated in other publications.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.735-740
• /
• 2001

With the development of micro-technology, the demand for micro actuator is increasing. But, it is difficult to achieve high resolution and long travel range simultaneously with the conventional actuators. So, the noncontact surface actuator was proposed. This actuator can realize high dynamic range and the planar motion without complex cross-axis linear slides. This paper describes a magnetically suspended linear actuator for developing a non-contact surface actuator. The operating principle and the structure of the proposed linear actuator are similar to switched reluctance motor, but the proposed linear actuator utilizes normal force and propulsion force simultaneously. With this characteristic, the system can be simpler than other non-contact surface actuator.