• Journal of Astronomy and Space Sciences
• /
• 제17권2호
• /
• pp.125-132
• /
• 2000

Long-slit spectra, covering the wavelength range 4050~5150$\AA$, have been used to investigate the radial behavior of absorption line features (G4300, Fe4383, Ca4455, Fe4531, Fe4668, and H$\beta$) along the major and minor axes of the bulge of M104. The heliocentric recession velocity of M104 has been derived as 1260$\pm$190${kms}^{-1}$. The strength of a number of metal absorption lines is decreasing with increasing radius, and the minor axis shows much steeper radial line gradients than the major axis. Line index of H$\beta$ has an opposite trend to other metal lines, i.e., increasing outward. The results in this paper imply that the properties of absorption line index distribution in M104 bulge have in many aspects similar trends to those of elliptical galaxies.

• ETRI Journal
• /
• 제26권5호
• /
• pp.391-396
• /
• 2004

In this paper, we propose a packet scheduling discipline called packet loss fair scheduling, in which the packet loss of each user from different real-time traffic is fairly distributed according to the quality of service requirements. We consider an orthogonal frequency division multiple access (OFDMA) system. The basic frame structure of the system is for the downlink in a cellular packet network, where the time axis is divided into a finite number of slots within a frame, and the frequency axis is segmented into subchannels that consist of multiple subcarriers. In addition, to compensate for fast and slow channel variation, we employ a link adaptation technique such as adaptive modulation and coding. From the simulation results, our proposed packet scheduling scheme can support QoS differentiations while guaranteeing short-term fairness as well as long-term fairness for various real-time traffic.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권8호
• /
• pp.463-468
• /
• 2004

This paper was applied space harmonic method as a characteristic analysis technique for slotless PMLSM. There is advantages of active response to the change of design parameters as well as reduction of the calculation time. The method can be overcome disadvantages of finite element analysis that needs long times calculation, repetitions of pre and post-process. In this paper, 3D-space harmonic method was applied to consider the precise description of end turn coil shape and the changes of characteristic according to changes of length of z-axis direction. The thrust of optimal design was performed using genetic algorithm to enhance the thrust which is the disadvantage of slotless type PMLSM. For design parameters, width of permanent magnet, width of coil, width of coil inner and lengths of z-axis direction were selected. For objective functions. thrust per weight. thrust per volume. multi-objective function was selected.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.155-162
• /
• 2004

This paper presents the fabrication procedure and the experiments for the 3-axis fine positioning stage proposed in［1］. First, the dynamic characteristics of the actuator and the stage are tested with the preload changed in order to validate the stage design specifications. Secondly, the performance of the stage is also evaluated on the accuracy associated with linear positioning, angular error, and straightness error. Experimental results show that the developed stage is accurate enough to be used for nanometer positioning. Through the analysis and experiment, the developed fine positioning stage are found to have a long stroke due to the magnetically preloaded PZT actuators, the minimum motion crosstalk due to the use of a ball contact mechanism and the compact design.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1318-1324
• /
• 2018

This paper evaluates the effects of door opening, collar stiffener, and initial imperfection on the ultimate strength of a 10 MW wind tower. The lower segment of the tower was modeled to investigate the ultimate strength using steel cylindrical shell elements of finite element program ABAQUS. The wind tower was classified into three categories; without opening nor stiffener (C1), with opening but no stiffener (C2), and with opening and stiffener (C3). The C2 and C3 were further divided into long axis and short axis categories depending on the position of the opening. Result from linear and nonlinear analyses shows that the bigger the opening the bigger the reduction in strength and the same thing goes for the initial imperfection ratio or ovality of the shell. Also, there is a significant decreased in strength as the initial imperfection ratio increases by as high as 18.08%.

• Bulletin of the Korean Chemical Society
• /
• 제17권4호
• /
• pp.358-362
• /
• 1996

The ionic strength dependent binding mode of 9-aminoacridine (9AA), a well-known DNA intercalator, to DNA is studied by flow linear dichroism, circular dichroism, fluorescence techniques and equilibrium dialysis. The DNA-bound 9AA exhibits spectral properties corresponding to the intercalative binding mode disregarding the salt concentrations; the angle between the long-axis transition moment of the 9AA molecule and DNA helix axis is calculated to be about 65°, indicating a significant deviation from the classical intercalation. At low salt concentrations, however, upwards bending curve in Stern-Volmer plot is observed (where 9AA is a fluorophore and DNA a quencher), indicating the coexistence of both static and dynamic quenching mechanisms or the existence of an additional binding site.

• Wind and Structures
• /
• 제6권3호
• /
• pp.179-196
• /
• 2003

A long suspension bridge is often located within a unique wind environment, and strong winds at the site seldom attack the bridge at a right angle to its long axis. This paper thus investigates the buffeting response of long suspension bridges to skew winds. The conventional buffeting analysis in the frequency domain is first improved to take into account skew winds based on the quasi-steady theory and the oblique strip theory in conjunction with the finite element method and the pseudo-excitation method. The aerodynamic coefficients and flutter derivatives of the Tsing Ma suspension bridge deck under skew winds, which are required in the improved buffeting analysis, are then measured in a wind tunnel using specially designed test rigs. The field measurement data, which were recorded during Typhoon Sam in 1999 by the Wind And Structural Health Monitoring System (WASHMS) installed on the Tsing Ma Bridge, are analyzed to obtain both wind characteristics and buffeting responses. Finally, the field measured buffeting responses of the Tsing Ma Bridge are compared with those from the computer simulation using the improved method and the aerodynamic coefficients and flutter derivatives measured under skew winds. The comparison is found satisfactory in general.

• 천문학회보
• /
• 제39권2호
• /
• pp.103-103
• /
• 2014

Manufacturing of lens and mirror using Diamond Turning Machine (DTM) offers distinct advantages including short fabrication time and low cost as compared to grinding or polishing process. However, the DTM process can leave mid-frequency error in the optical surface which generates an undesirable diffraction effect and stray light. The mid-frequency error is expected to be eliminated by mechanical polishing after the DTM process, but polishing of soft surface of ductile aluminum is extremely difficult because the polishing process inevitably degrades the surface form accuracy. In order to increase its surface hardness, we performed electroless nickel plating on the surface of diamond-turned aluminum (Al-6061T6) off-axis mirrors, which was followed by the 6-hour-long baking process at $200^{\circ}C$ for improving its hardness. Then we polished the nickel plated off-axis mirrors to remove the mid-frequency error and measured polished mirror surfaces using the optical surface profilometer (NT 2000, Wyko Inc.). Finally, we ascertained that the mid-frequency error on the mirror surface was successfully removed. During the whole processes of nickel plating and polishing, we monitored the form accuracy using the ultra-high accurate 3-D profilometer (UA3P, Panasonic Corp.) to maintain it within the allowable tolerance range (< tens of nm). The polished off-axis mirror was optically tested using a visible laser source and a pinhole, and the airy pattern obtained from the polished mirror was compared with the unpolished case to check the influence of mid-frequency error on optical images.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.69-80
• /
• 2007

The purpose of this study was to investigate the difference of ground reaction forces of swimming athletes during their starting motion and to find out the most effective starting motions which were used in swimming athletes. The subjects were 9 male and 8 female high school swimming athletes who were athletic career over 7 years and used three starting motions in competition. The ground reaction forces were measured from each athletes performing three starting motion each of the open grap starting motion, closed grap starting motion and track starting motion. For the measurement, the force platform of AMTI company was utilized, and the analysis on measured ground reaction forces were used of Biosoft(Ver. 1.0). The items measured were stance time, Fz max deceleration force and Fz max deceleration force time, Fz mid stance force and Fz mid stance force time, Fz max acceleration force and Fz max acceleration force time, Torque maximum and Torque maximum time, Torque average, Excursion along Y axis of center of pressure of foot, Excursion along X axis of center of pressure of foot, Length of center of pressure of foot, Average velocity of center of pressure of foot. The data measured by the closed grap starting motion, open grap starting motion and track starting motion were analyzed by one-way repeated ANOVA. The results were as follows ; 1. The Fz max deceleration force time, Fz mid stance force, Fz max acceleration force, Torque maximum and Torque maximum time, Excursion along Y axis of center of pressure of foot, Average velocity of center of pressure of foot were significantly fast and large in the closed grap starting motion then open grap starting motion and track starting motion. 2. The Excursion along Y axis of center of pressure of foot was significantly long in the closed grap starting motion then open grap starting motion and track starting motion.

• 한국어류학회지
• /
• 제13권3호
• /
• pp.166-172
• /
• 2001

1995년 8월 제주도 근해에서 스쿠바 다이빙하여 연무자리돔의 산란보호행동을 관찰하였으며, 채집된 연무자리돔의 난은 부경대학교로 운반하여 부화, 사육하였다. 연무자리돔의 난은 평탄하고 단단한 기질의 산란소에 한층으로 부착되어 있었고, 수컷은 산란소 주위에서 접근해오는 다른 어종을 공격하는 산란보호행동을 나타내었다. 수정난은 무색투명하고, 타원형을 띠며, 부착사를 가진 침성부착난으로 난경은 장경이 0.73~0.88 mm, 단경이 0.50~0.56 mm이었다. 시간의 경과에 따른 난경의 변화는 T-test 결과 장경은 유의한 차이를 나타내었으나 (p<0.01) 단경은 유의한 차이가 없었다 (p>0.05). 수정난은 $23.0{\sim}25.5^{\circ}C$ 수온 범위에서 사육되었으며, 부화까지는 4~5일이 소요되었다. 부화자어는 척색장 1.10~1.61 mm로 21개의 근절을 가지고 있고 입은 닫힌 상태이나 항문은 열려 있으며, 항문전장은 척색장의 45.8%에 달하였고, 흑색소포는 두정부, 눈, 복강의 등쪽 및 꼬리의 배쪽 가장자리에 분포하였다. 부화자어의 난황과 유구는 부화 후 3~4일만에 완전히 흡수되어, 이 시기에 후기자어로 이행하였다. 부화 후 3일째 자어는 척색장 1.9~2.4 mm로 25개의 근절을 가지며, 빠르게 성장하였고, 부화 후 9일째 자어는 척색장 2.9 mm로 복부 등쪽에 처음으로 부레가 출현하였으며, 흑색소포는 형태적으로 커지면서 수적으로는 감소하였다.