• Journal of Korea Port Economic Association
• /
• v.35 no.4
• /
• pp.187-206
• /
• 2019

After reviewing the concept and previous studies related to green ports, this study analyzes the implications of green port policy of advanced ports in foreign countries and analyzes problems in terms of environmentally-friendly green port policy for Ulsan port, and to present sustainable green logistics establishment measures. The literature survey and Benchmarking methods are adopted as research methodology and the results are as follows. First, the pan-government climate change response management system, legislation of relevant laws, implementation of fiscal support policies, and roadmaps should be established. Second, the foundation for eco-friendly green growth should be established through the discovery of business models in conjunction with leading industries in the Southeastern Metropolitan Economic Area. Third, the Ulsan Port Greenport, such as AMP, in-port LNG propulsion ship, and ESI vessel incentive, should be built. Fourth, a low-carbon, high-efficiency sea-shuttle service shall be established through the introduction of the sea-shuttle service along the sea route. Fifth, energy self-reliant ports, including all institutions in the metropolitan Ulsan port area that have exceeded the level of Ulsan port Authority, should be built. Finally, water-type ports need to be built through the creation of coastal forests, the purification of marine water quality, and the introduction of colors to port.

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.203-208
• /
• 2022

Recently, various digital technology issues such as e-Navigation, Maritime Autonomous Surface Ship (MASS) and Smart ships have constantly emerged in the maritime industry, based on the fourth industrial revolution. The International Maritime Organization is gradually tightening regulations for marine safety and marine environmental protection, and these strengthened regulations are leading to new maritime industries. Thus, the purpose of this study was to design a suitable model to analyze the industrial competitiveness of domestic autonomous operation technology industry, based on the Porter's diamond model. Based on a total of five evaluation factors and 13 detailed factors, the industrial competitiveness of the domestic autonomous operation technology industry was evaluated qualitatively and quantitatively. This industry, which is in the early stage of industrial development, was evaluated as 16.9 points relative to indexing industrial competitiveness. Currently, it is characterized by the simultaneous development of related regulations and core technologies, from the establishment of the scope of the industry. The industrial competitiveness evaluation considering these industrial characteristics is expected to serve as the basis for strategic support and new industrial policy, and impact a wide range of related industries such as shipping, logistics, ports, and shipbuilding and equipment industries.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.49-59
• /
• 2016

Naval combat system developed in-country is progressing at an alarming rate since 2000. ROK navy will be achieved all vessels that have combat system in the near future. The importance of System Engineering and Integrated Logistics Support based on reliability analysis is increasing. However, reliability analysis that everyone trusted and recognized is not enough and applied practically for development of Defense Acquisition Program. In particular, Existing Reliability Analysis is focusing on reliability index (Mean Time Between Failure (MTBF) etc.) for policy decision of defense improvement project. Most of the weapon system acquisition process applying in the exponential distribution simply persist unreality due to memoryless property. Critical failures are more important than simple faults to ship's operator. There are no confirmed cases of reliability analysis involved with critical failure that naval ship scheduler and operator concerned sensitively. Therefore, this study is focusing on Mean Time To Critical Failure (MTTCF), reliability on specific time and Operational Readiness Float (ORF) requirements related to critical failure of Patrol Killer Guided missile (PKG) combat system that is beginning of naval combat system developed in-country. Methods of analysis is applied parametric and non-parametric statistical techniques. It is compared to the estimates and proposed applications. The result of study shows that parametric and non-parametric estimators should be applied differently depending on purpose of utilization based on test of normality. For the first time, this study is offering Reliability of ROK Naval combat system to stakeholders involved with defense improvement project. Decision makers of defense improvement project have to active support and effort in this area for improvement of System Engineering.

• International Commerce and Information Review
• /
• v.19 no.1
• /
• pp.3-21
• /
• 2017

As to 'E-Commerce Trade' or 'The Cross Border E-Commerce (CBEC)' which has shown rapid diffusion, Korean government is providing active support on the basis of idea that it has profound impact on increase of export. However, sporadic support propelled by various ministries and agencies are not effective and efficient at all on actual circumstances. Consequently, in order to promote consistency, effectiveness, and efficiency of supporting policy, it is desirable to clarify competent ministry and the duty of cooperation to the other ministries and agencies. For its own sake, it is necessary to amend each existing laws which scattered all over the business territory, or to legislate new enactments. Yet these methods are extremely tough to carry out, therefore, it seems that amending 'Electronic Trade Facilitation Act', which already exist and regulate 'paperless trade' would be a realistic alternative. For the diffusion of Korean CBEC especially export, in this study the author insists that amending this law to promote CBEC is the most reasonable way comparing to other ways with several reference materials.

• 한국벤처창업학회:학술대회논문집
• /
• 2006.04a
• /
• pp.205-240
• /
• 2006

In today's world economy, technology and knowledge have become the key words for value creation. Since 1998, various research institutions and universities in Korea, with support from Small and Medium Business Administration, have buckled to establish and operate incubating centers in order to foster such industries. Even though these centers have been operated in accordance with the purpose of the establishment, it has been over six years now, and it is necessary to evaluate its overall performance before moving on. Incubating a venture company results in not only technology innovation, but also jobs creation and economic growth. Knowing the importance of that, a government, at all levels, has supported the incubating centers as the most effective way to support venture companies in Korea. Incheon now plays a great role as a hub of logistics and trade in North East Asia. In order to nurture the city as the center of Korean economy, the city of Incheon has financially supported various incubating centers in the city, in an effort to incubate potential venture companies with lack of business experiences. It is imperative to find out what these companies need and how they evaluate the system at this point to develop a guiding principle of its operation as well as a careful selection process of a company in the future. In section II of this research, a concept of an incubating center is defined. An objective, a policy of its operation as well as its structure are explained in this chapter with case studies of Incheon College. 'Resources' are divided into human resources and material resources. And the survey that 71 different companies (out of 164 companies in 10 different incubating centers) have participated in is included in this section as well.

• Journal of the military operations research society of Korea
• /
• v.37 no.1
• /
• pp.11-25
• /
• 2011

This study analyzes the quantitaive effect of 155M artillery ammunition procurement from third party countries in the wartime using simulation. First, we study the concept of ammunition supply, procurement plan, transportation plan in the wartime and logistics support from third party countries. We then study the ammunition support possibility from third party countries. Secondly, we make a basic model on the sea-lift from Korea to U.S in the wartime using simulation followed by making comparative models on the sea-lift from Korea to U.S and third party countries. Finally, we analyze models on the completion date of ammunition transportation and the ammunition amount of each operation step. We then execute the sensitivity analysis on the ammunition amount from third party countries. In cocclusion, ammunition prcurement from third party countreis more supply 10% than basic model.

• International Commerce and Information Review
• /
• v.13 no.2
• /
• pp.27-48
• /
• 2011

Single window has become a critical point of trade facilitation. While Korea has set up the first web based single window 'uTtradeHub', China has also been working on a seamless single window. As strong governmental support, advanced technology, leading agency and legal framework are success factors for single window, China already has solid foundation for this. For the leading agency, this research suggests the CIECC as a leading agency with linkage to E-Port service for seamless trade service for companies. We expect that Chinese single window will materialize in near future by a leading agency with the help of strong governmental support.

• Proceedings of the CALSEC Conference
• /
• 1999.07a
• /
• pp.277-299
• /
• 1999

Since Chrysler Motor Co. had experienced the digital development system in the beginning of 1990's, most of leading automobile companies are trying to apply a digital information system for their own business process reengineering based upon concurrent engineering system from product planning phase. This is called as virtual DMU(Digital Mock-Up) system instead of the traditional PMU(Physical Mock-Up) system. By using the virtual prototype, all of the design requirements and system specifications can be checked, changed and optimized more quickly and more efficiently. This paper consists of five chapters for the DMU information system. In the 1$^{st}$ chapter, the principle of digital design system is suggested by using four basic modules such as product design module, process design module, manufacturing system design module and central control module. The basic scheme of DMU is introduced with the benefits of application in the chapter 2. In the chapter 3, a digital design process of new car development is explained with the detailed DMU design and design review processes. In the chapter 4, the practical DMU manufacturing techniques and applications are introduced as CAD/CAM analyses, DPA(Digital Pre-Assembly)reviews for development, production, operation and maintenance phases, digital tolerance analyses and digital factory analyses for assembling line simulation, automated robot welding processes, production jig ＆ fixtures and painting process simulation. Finally, the activities of digital design support; CAS-styling, CAE-engineering and CAT-testing are summarized for design optimization in the chapter 5. As today's automobile manufactures and related business organizations are struggling to compete in the global marketplace, they are concentrating on efficient use of DMU information system to reduce the new car development cost, to have shorten the delivery schedule and to improve product design quality. To meet the demand of those automobile industries on digital information systems, the CALS(Computer aided Acquisition and Logistics Support) and EC(Electronic Commerce)initiative has been focused as a dominant philosophy in defense ＆ commercial industries, specially automobile industries.s.

• Journal of Intelligence and Information Systems
• /
• v.12 no.4
• /
• pp.91-107
• /
• 2006

This study introduces a software system for supporting the engineering process of container terminals. The design procedure consists of data input, capacity requirements, alternative design, alternative evaluation, and results output. In order to design and evaluate alternatives rapidly, a set of libraries for container terminals was developed. The libraries consist of Wharf, Yard, TravellingArea, and Gate. The architecture of the set of libraries was designed by an object-oriented approach. Various types of container terminal models can be constructed by using a user friendly interface, the CAD based environment, and the combinations of the elements of the libraries. Alternative models can be evaluated by a simulation.

• Journal of National Security and Military Science
• /
• s.5
• /
• pp.1-45
• /
• 2007

Reserved forces of ROKA are in charge of replacement of TOE in the wartime and mission of rear area operation. But there is institutional inertia in the law and organization oriented to fill human resources rather than take mission. We need to prepare for the investment and arrangement of reserved forces as military power that would be replaced standing forces. In this portion, to reinforce reserve forces elite, First, efficient mobilization regulations and systems are suggested. I covered a maintenance of relevant mobilization ordinances which need to legislated and approved by national assembly for wartime and development of mobilization system which might lose the appropriate time for mobilization due to complicated declaration procedures and measures to overcome the panic at the initial stage of the war and organization and employment of nationwide transportation system and mobilization center. To ensure efficient resource management and mobilization of reserve forces with a number of approximately 3 million, there's a necessity of organization for integration and conciliation. To make it real, I suggested establishing and employing the mobilization center, on first phase, employ the mobilization center focusing on homeland divisions, on second phase, it is advisable to convert to national level mobilization system and develop to central mobilization center focusing on national emergency planning committee. During peacetime, in conjunction with Mobilization Cell, mobilization center can conduct resource survey and integrate and manage mobilization resources and take charge of mobilization training of subordinate units, and during wartime, in conjunction with mobilization coordination team and Cell, can ensure the execution of mobilization. Second, Future oriented reserve forces management system such as service system of reserve forces and support system of homeland defense operations. Current service and trainings of reserve forces by the year have very low connection, as it is very complex to manage the resources and trainings, and service and training lack the equity, re-establishment of service system is required. Also in an aspect of CSS and cultivation support for reserve forces, as the scope and limitation of responsibility between the armed forces and autonomous organization is obscure, conditions to conduct actual-fighting exercises are limited. Concentrated budgetting is extremely difficult because reserve forces training fields are scattered nationwide, and facilities and equipments are rapidly getting older. To improve all these, I suggest the organization of homeland defense battalion with a unit of "City-Gun-District" and supporting the local reserve forces. Conduct unit replacement or personal replacement for those who have finished their 1 or 2 years and homeland defense operation duty for those with 3-5 years for consistency and simplification. Third, I suggest Future oriented Reserved Training(FRT) and Training Center oriented training management to establish a reliable reserve training. Reserves carry out expansion of unit, conventional combat mission, homeland defense and logistics support during wartime, and actual-fighting exercise, and disaster relief, peace keeping activities. Despite diverse activities and roles, their training condition still stays definitely poor. For these reasons, Modernization of weapons and facilities through gradual replacement and procurement is essential to enhance mobilization support system.