• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1193-1208
• /
• 2014

A simulation of failures on responsible elements is only one form of the extreme structural behavior analysis. By understanding the dynamic behavior in incidental situations, it is possible to make a special structural design from the point of the largest axial force, stress and redundancy. The numerical realization of one such simulation analysis was performed using FEM in this paper. The boundary parameters of transient analysis, such as overall structural damping coefficient, load accelerations, time of load fall and internal forces in the responsible structural elements, were determined on the basis of the dynamic experimental parameters. The structure eigenfrequencies were determined in modal analysis. In the study, the basic incidental models were set. The models were identified by many years of monitoring incidental situations and the most frequent human errors in work with heavy structures. The combined load models of structure are defined in the paper since the incidents simply arise as consequences of cumulative errors and failures. A feature of a combined model is that the single incident causes the next incident (consecutive timing) as well as that other simple dynamic actions are simultaneous. The structure was observed in three typical load positions taken from the crane passport (range-load). The obtained dynamic responses indicate the degree of structural sensitivity depending on the character of incident. The dynamic coefficient KD was adopted as a parameter for the evaluation of structural sensitivity.

• Industrial Engineering and Management Systems
• /
• 제7권1호
• /
• pp.51-56
• /
• 2008

With growing demand for zero defects, predicting reliability of software systems is gaining importance. Software reliability models are used to estimate the reliability or the number of latent defects in a software product. Most reliability models to estimate the reliability of software in the literature are based on the development lifecycle stages. However, in the maintenance phase, the software needs to be corrected for errors and to be enhanced for the requests from users. These decrease the reliability of software. Software Reliability Growth Models (SRGMs) have been applied successfully to model software reliability in development phase. The software reliability in maintenance phase exhibits many types of systematic or irregular behaviors. These may include cyclic behavior as well as long-term evolutionary trends. The cyclic behavior may involve multiple periodicities and may be asymmetric in nature. In this paper, SGRM has been adapted to develop a reliability prediction model for the software in maintenance phase. The model is established using maintenance data from a commercial shop floor control system. The model is accepted to be used for resource planning and assuring the quality of the maintenance work to the user.

• 대한안전경영과학회지
• /
• 제20권2호
• /
• pp.1-8
• /
• 2018

This study aims to provide a real-time information to the driver by effectively operating the advanced safety device attached to the freight vehicle, thereby minimizing insecure behavior of the driver such as speeding, rapid acceleration, sudden braking, And improve driving habits to prevent accidents and save energy. Advanced safety equipment is a device that warns the driver that the vehicle leaves the driving lane regardless of the intention of the driver and reduces the risk of traffic accidents by mitigating or avoiding collision by detecting a frontal collision during driving.The main contents of this report are as follows: In case of installing a warning device on a lane departing vehicle (excluding a light vehicle) and a lorry or special vehicle with a total weight exceeding 3.5 tonnes, the driver must continue to operate unless the driver releases the function.In addition, when the automatic emergency braking system is installed, the structure should be such that the braking device is operated automatically after warning the driver when the risk of collision with the running or stopped vehicle in the same direction is detected in front of the driving lane.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.128-133
• /
• 2003

In this paper, we have proposed a method by using virtual simulation to calculate the behaviors of spacers to avoid conductor galloping with the hanging composite polymer spacer between conductors on different phases. We have considered with three types of modeling considerations for the analysis of galloping in power transmission lines, such as iced-single conductors without spacer, iced-single conductors with spacers, and iced-two bundle conductors with spacers. In simulation, the finite element method is used to calculate the structural response with geometric nonlinear behavior. The iced conductor is modeled by two beam-element faces with which it is connected. The ANSYS program is applied too. First, the calculation results show that the two beam-element model is very suitable to make a virtual simulation. Second, the amplitude of conductor galloping is reduced after hanged spacers. Third, when number of spacer is increased, the maximum magnitude of natural frequency of iced conductor will reduce. Final, the behaviors of spacers are verified in viewpoint of standard cases.

• 한국항해항만학회지
• /
• 제36권2호
• /
• pp.141-148
• /
• 2012

This study evaluates how activation plans presented by previous research are perceived by employees in the ship supply industry by sample surveys. Another objective of this study is to also assist in the selection of effective activation plans. It is becoming more and more difficult for the Port of Busan to strengthen its competitiveness in the ship supply industry by maintaining the status quo. Much research extending the scope of research subjects in the port logistics industry indicates that the development of the port logistics industry is very important for creating new value for the Port of Busan. The results shows that improvement in the retail structure and government support had a significantly positive correlation between the importance and necessity of the ship supply industry activation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.395-396
• /
• 2005

We fabricated self-assembled monolayers(SAMs) onto quartz crystal microbalance(QCM) using viologen, which has been widely used as electron acceptor and electron transfer mediator. We determined the time dependence to resonant frequency shift during self-assembly process and observed the morphology of self-assembled mono layers by STM and investigated the electrochemical behavior of SAMs by cyclic voltammetry. Electrochemical deposition of viologen was investigated using electrochemical quartz crystal microbalance(EQCM). The redox reactions of viologen were highly reversible and the EQCM has been employed to monitor the electrochemically induced adsorption of SAMs during the redox reactions.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.256-257
• /
• 2023

This paper aims to propose optimal method to assess and cumulate the daily profit for liner shipping to support the shipping lines in making optimal decision with the highest average daily profit. This paper not only explains the actual calculated results align with decision-makers' behavior from concepts indicated in cumulative prospect theory but also contributes to an easy-to-apply method for liner shipping network predictability in and provides optimal decision-making is helpful for shipping managers for the best effective selection of the most appropriate alternative under uncertainties.

• 유통과학연구
• /
• 제1권1호
• /
• pp.1-24
• /
• 1999

CALS/EC is about doing business electronically. It is based on the electronic processing and transmission of data, including text, sound and video. It encompasses many diverse activities including electronic trading of goods and services, online delivery of digital content, electronic fund transfers, electronic share trading, electronic bills of lading, commercial auctions, collaborative design and engineering, online sourcing, public procuremet, direct consumer marketing, and after-sales service. It involves both products(e.g. consumer goods, specialised medical equipment) and services(e.g. information services, financial and legal services); traditional activities(e.g. healthcare, education) and new activities (e.g. virtual malls). CALS/EC will be emerging to replace and substitute the role of the conventional market. By changing and eliminating some processes of the transactions, the electronic market and the electronic commerce will redistribute the power and hence the benefits of the market activities. Traditional way of doing business may enter into the new electronic market because the role and function of trust and established reputation will be reinforced in the electronic market. The CALS/EC through the Internet has been in the spotlight in the shopping behavior of the consumers. Accordingly Corporates are trying to adapt themselves to those rapidly changing environments being affected by the Internet. Among others, particularly to be noted is the CALS/EC between corporations and consumers whose potential growth can be considered very substantial. This report, focusing on the introduction of CALS/EC for the logistics of SMEs, will allow us to prepare more efficiently for the coming 21st Century. It is obvious that CALS/EC is fast becoming the useful way of exchanging not only information but products in business between firm-to-firm and firm-to-customer.

• Asia pacific journal of information systems
• /
• 제28권2호
• /
• pp.133-153
• /
• 2018

This study investigates responses to privacy concerns by analyzing the psychological and behavioral characteristics related to the disposition toward invoices of courier service users. To this end, we develop a theoretical framework by combining stimulus response theory, communication privacy management theory, the theory of reasoned action, and the theory of planned behavior. Based on the theoretical framework, we analyze the relationships between social influence, privacy propensity, privacy control, privacy risk, privacy concern, invoice disposition intention, and invoice disposition behavior in the context of courier services. To test our hypotheses, we survey courier service users in the U.S. and Korea. Using a structural equation model, we test the relationships among these various factors for the courier service users of the two countries. Results have distinct implications for the psychological and behavioral characteristics concerning the disposal of courier invoices and enable understanding of the characteristics of courier service customers of the two countries.

• 디지털융복합연구
• /
• 제18권6호
• /
• pp.167-175
• /
• 2020

본 논문의 목적은 보다 높은 수준의 서비스 품질과 소비자 지향적인 전자상거래 플랫폼을 개발하기 위한 방향 제시 및 정책적 참조를 제공하는 것이다. 본 논문은 고객만족이론과 인지적 가치 이론을 이용하여 중국 신선 농산물 전자상거래의 소비자 행동 모형을 구축하고 설문조사 및 SPSS23.0을 이용하여 가설을 검증하였다. 연구결과 소비자들은 신선 농산물을 소비할 때, 제품 품질, 물류 및 유통 서비스 품질, 전자상거래 플랫폼 상호작용 품질, 그리고 제품가격과 인지 가치가 소비자 행동에 긍정적인 영향이 미치는 것으로 나타났다. 본 연구는 신선 농산물 전자상거래의 소비자 행동 연구에 의의가 있으며, 신선 농산물 전자상거래 기업에도 소비자 행동을 이해할 수 있다는데 의의가 있다. 본 논문에서 제시한 모델에서는 각 영향요인과 소비자 행동의 관계를 종합적으로 고려하지만 미세 요인의 가능한 관계는 다루지 않았다. 향후 연구에서는 산업의 특성과 특수성을 명확히 하고, 그 영향 요인을 종합적으로 고려해 심층분석할 필요가 있다.