• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.5
• /
• pp.209-217
• /
• 1985

Using the Reed-Muller Codes, the encoder and decoder system has been designed and tested in this paper. The error correcting capability of this code is [J/2} or less and the error correcting procedure can be implemented easily by using simple logic circuitry. The encoding and decoding circuits are obtained by the cyclic property and for the O15, 11) Reed-Muller code majority-logic decoding is taken. The performance is measured in error probability and weight destribution. The encoder and decoder system has been designed, implemented and interfaced with the microcomputer by using the 8255 chip. Experimental results show that the system has single error-correcting capability and total execution time for a data is about 70usec. When the probability of channel error is $10^{-6}$~$10^{-4}$ the system using the (15, 11) Reed-Muller code works very good.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.152-162
• /
• 2003

In this paper, Binary to Quaternary Converter(BQC), Quaternary to Binary Converter(QBC) and Quaternary inverter circuit, which is the basic logic gate, have been proposed based on voltage mode. The BQC converts the two bit input binary signals to one digit quaternary output signal. The QBC converts the one digit quaternary input signal to two bit binary output signals. And two circuits consist of Down-literal circuit(DLC) and combinational logic block(CLC). In the implementation of quaternary inverter circuit, DLC is used for reference voltage generation and control signal, only switch part is implemented with conventional MOS transistors. The proposed circuits are simulated in 0.35 ${\mu}{\textrm}{m}$ N-well doubly-poly four-metal CMOS technology with a single +3V supply voltage. Simulation results of these circuit show 250MHz sampling rate, 0.6mW power consumption and maintain output voltage level in 0.1V.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.1050-1057
• /
• 2004

The purpose of study is development of a fuzzy controller which independent of a computer and its software for fuzzy control of servo system. This paper describes a method of approximate reasoning for fuzzy control of servo system, based on decomposition of $\alpha$-level fuzzy sets, It is propose that fuzzy logic algorithm is a body from fuzzy inference to defuzzificaion in cases where the output variable u directly is generated PWM. The effectiveness of quantified $\alpha$-levels on input/output characteristics of fuzzy controller and output response of DC servo system is investigated. It is concluded that $\alpha$-cut 4 levels give a sufficient result for fuzzy control performance of DC servo system. The experimental results shows that the proposed hardware method is effective for practical applications of DC servo system.

• The Journal of Korean Association of Computer Education
• /
• v.20 no.4
• /
• pp.77-84
• /
• 2017

This paper proposes a tool that can be used as a logical expression simplification tool that can be used for deepening learning of logic circuits and further utilized as a design automation tool for optimizing semiconductor parts. The simplification method of logical expressions proposed in this paper is to find common subexpressions existing in various logical expressions and reduce the repetitive use. Finally, the goal is to minimize the number of literals used in all logical expressions. These previous studies failed to produce a common subexpression embedded in the logical expressions because they only use division principle. The proposed method uses cubes with a Hamming distance of 3 to find the common subexpression embedded between logical expressions. Experiments using benchmark circuits show that the proposed method reduces the number of literals by as much as 47% when comparing simplifications with other methods.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.10
• /
• pp.1216-1224
• /
• 1988

In this paper, it is presented element generation, addition, multiplication and division algorithm over GF ($2^m$) to calculate multiple-valued logic function. The results of addition and multiplication among these algorithms are applied to the current mode CMOS circuits with ROM structure to design of adder and multiplier on GF ($2^m$). Table-lookup and Euclid's algorithm are required the computation in large quentities when multiple-valued logic functions are developed on GF ($2^m$). On the contrary the presented operation algorithms are prefered to the conventional methods since they are processed without relation to increasing degree m in the general purpose computer. Also, the presened logic circuits are suited for the circuit design of the symmetric multiplevalued truth-tables and they can be implemented addition and multiplication on GF ($2^m$) simultaueously.

• Progress in Superconductivity
• /
• v.8 no.2
• /
• pp.181-185
• /
• 2007

For more than two decades Nb trilayer ($Nb/Al_2O_3/Nb$) process has been serving as the most stable fabrication process of the Josephson junction integrated circuits. Fast development of semiconductor fabrication technology has been possible with the recent advancement of the fabrication equipments. In this work, we took an advantage of advanced fabrication equipments in developing a superconducting Arithmetic Logic Unit (ALU) by using Nb trilayers. The ALU is a core element of a computer processor that performs arithmetic and logic operations on the operands in computer instruction words. We used DC magnetron sputtering technique for metal depositions and RF sputtering technique for $SiO_2$ depositions. Various dry etching techniques were used to define the Josephson junction areas and film pattering processes. Our Nb films were stress free and showed the $T{_c}'s$ of about 9 K. To enhance the step coverage of Nb films we used reverse bias powered DC magnetron sputtering technique. The fabricated 1-bit, 2-bit, and 4-bit ALU circuits were tested at a few kilo-hertz clock frequency as well as a few tens giga-hertz clock frequency, respectively. Our 1-bit ALU operated correctly at up to 40 GHz clock frequency, and the 4-bit ALU operated at up to 5 GHz clock frequency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.101-108
• /
• 2004

A 16-bit adiabatic ALU(arithmetic logic unit) is designed. A simplified four-phase clock generator is also designed to provide supply clocks for the adiabatic circuits. All the clock line charge on the capacitive interconnections is recovered to recycle energy. Adiabatic circuits are designed based on ECRL (efficient charge recovery logic) using a 0.35${\mu}{\textrm}{m}$ CMOS technology. The post-layout simulation results show that the power consumption of the adiabatic ALU including supply clock generator is reduced by a factor of 1.15-1.77 compared to the conventional CMOS ALU with the same structure.

• Interdisciplinary Bio Central
• /
• v.4 no.3
• /
• pp.10.1-10.12
• /
• 2012

Introduction: We investigated frameshift suppressor tRNAs previously reported to use five-base anticodon-codon interactions in order to provide a collection of frameshift suppressor tRNAs to the synthetic biology community and to develop modular frameshift suppressor logic devices for use in synthetic biology applications. Results and Discussion: We adapted eleven previously described frameshift suppressor tRNAs to the BioBrick cloning format, and built three genetic logic circuits to detect frameshift suppression. The three circuits employed three different mechanisms: direct frameshift suppression of reporter gene mutations, frameshift suppression leading to positive feedback via quorum sensing, and enzymatic amplification of frameshift suppression signals. In the course of testing frameshift suppressor logic, we uncovered unexpected behavior in the frameshift suppressor tRNAs. The results led us to posit a four-base binding hypothesis for the frameshift suppressor tRNA interactions with mRNA as an alternative to the published five-base binding model. Conclusion and Prospects: The published five-base anticodon/codon rule explained only 17 of the 58 frameshift suppression experiments we conducted. Our deduced four-base binding rule successfully explained 56 out of our 58 frameshift suppression results. In the process of applying biological knowledge about frameshift suppressor tRNAs to the engineering application of frameshift suppressor logic, we discovered new biological knowledge. This knowledge leads to a redesign of the original engineering application and encourages new ones. Our study reinforces the concept that synthetic biology is often a winding path from science to engineering and back again; scientific investigations spark engineering applications, the implementation of which suggests new scientific investigations.

• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.63-68
• /
• 1996

In order to implement the integrated capacitive pressure sensors, which contains integrated interface circuits to detect the electrical output signal, several main factors that have a bad effect on the characteristics of sensors must be improved, such as parasitic capacitance effects, temperature/thermal drift, and the leakage current of a readout circuitry. This paper describes the novel design of the dedicated CMOS readout circuitry that is consists of two capacitance to frequency converters and 4 bit digital logic compensating circuits. Dividing the oscillation frequency of a sensing sensor by that of reference sensor, this circuit is designed to eliminate the thermal/temperature drift and the effect of the leakage currents, and to access a digital signals to obtain a high signal-to-noise(S/N)ratio. Therefore, the resolution of this circuit can be increased by increasing the number of the digital bits. Digital compensated circuits of this circuits, except for the C-F converters, are fabricated on a FPGA chip, and fundamental performance of the circuits are evaluated.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.5
• /
• pp.59-65
• /
• 2013

Conventional synchronous design circuits cannot only satisfy the timing requirement of the low voltage digital systems, but also they may generate wrong outputs under the influence of PVT variations and aging effects. Therefore, in this paper, a NCL (Null Convention Logic) design as an asynchronous design method has been proposed, where the NCL method doesn't require any timing analysis, and it has a very simple design methodology. Base on the NCL method, a new low power reliable ALU has been designed and implemented using MagnaChip-SKhynix 0.18um CMOS technology. The experimental results of the proposed NCL ALU have been compared to those of a conventional pipelined ALU in terms of power consumption and speed.