• Bulletin of the Korean Chemical Society
• /
• v.19 no.8
• /
• pp.868-874
• /
• 1998

An equivalent retention has been experimentally observed in thermal field-flow fractionation (ThFFF) for different polymer-solvent systems. It is shown that iso-retention between two sets of polymer-solvent systems can be obtained by adjusting the temperature difference (ΔT) according to the difference in the ratio of ordinary diffusion coefficient to thermal diffusion coefficient. This method uses a compensation of field strength (ΔT) in ThFFF at a fixed condition of cold wall temperature. It is applied for the calculation of molecular weight of polymers based on a calibration run of different standards obtained at an adjusted AT. The polymer standards used in this study are polystyrene (PS), polymethylmethacrylate (PMMA), and polytetrahydrofuran (PTHF). Three carrier solvents, tetrahydrofuran (THF), methylethylketone (MEK) and ethylacetate (ETAc) were employed. Though the accuracy in the calculation of molecular weight is dependent on the difference in the slope of log λ vs. log M which is related to Mark-Houwink constant a, it shows reasonable agreement within about 6% of relative error in molecular weight calculation for the polymer-solvent systems having similar a value.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1057-1062
• /
• 2016

In this paper, a design method for a compact log-perio dic half-bow-tie dipole array antenna for an operation in a UWB band(3.1-10.6 GHz) is studied. The proposed antenna is miniaturized by using half-bow-tie shaped dipole elements instead of strip-type dipole elements, which are commonly used in a general log-periodic dipole array(LPDA) antenna, and by reducing the element spacing. The effects of the flare angle of the half-bow-tie elements and the spacing factor on input reflection coefficient and realized gain characteristics of the proposed log-periodic antenna are analyzed. The optimized antenna is fabricated on an FR4 substrate, and the experiment results show that the antenna has a frequency band of 2.95-11.31 GHz for a VSWR < 2, which assures the operation in the UWB band. In addition, the length and width of the proposed antenna are reduced to 32.1 % and 18.3 %, respectively, compared to the LPDA antenna.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.97-102
• /
• 1996

A methodology for estimating the number of failed fuel rods bused on the primary coolant activity in operating PWRs has been developed. This method deals with both the diffusion and the kinetic models. In case of small or medium cladding failures, the diffusion model which can consider different sizes of failure is used, whereas for large cladding failures the kinetic model is used. From the kinetic model, the release-to-birth rate ratio (R/B) is represented as a linear function of the number of failed fuel rods. This has been done by expressing the escape rate coefficient in terms of the slope of log(R/B) versus $log\;{\lambda}$. The present method has been applied to the cases of 26 cycles of several nuclear power plants for which ultrasonic testings were performed. The results show that the present method gives better predictions than the existing computer codes such as IODYNE and CADE.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.5
• /
• pp.74-82
• /
• 2011

SSD has a limitation of number of erase/write cycles and does not allow in-place update unlike the hard disk because SSD is composed of an array of NAND flash memory. Thus, FTL is used to effectively manage SSD of having different characteristics from traditional disk. FTL has page, block, log-block mapping method. Among then, when log-block mapping method such as BAST and FAST is used, the performance of SSD is degraded because frequent merge operations cause lots of pages to be copied and deleted. This paper proposes a data allocation and replacement method based on access frequency by allocating PRAM as checking area of access frequency, log blocks, storing region of hot data in SSD. The proposed method can enhance the performance and lifetime of SSD by storing cold data to flash memory and storing log blocks and frequently accessed data to PRAM and then reducing merge and erase operations. Besides, a data replacement method is used to increase utilization of PRAM which has limitation of capacity. The experimental results show that the ratio of erase operations of the proposed method is 46%, 38% smaller than those of BAST and FAST and the write performance of the proposed method is 34%, 19% higher than those of BAST and FAST, and the read performance of the proposed method is 5%, 3% higher than those of BAST and FAST, respectively.

• Journal of electromagnetic engineering and science
• /
• v.12 no.3
• /
• pp.196-202
• /
• 2012

Spectrum sensing is one of the most important functions in cognitive radio systems. In this paper, we focus on reducing the sensing time in a cooperative spectrum sensing paradigm. In the proposed scheme, a sequential detection technique is employed to provide a robust and quick detection system. Each of the secondary users measures the log-likelihood probability of the received signals and then sequentially reports to the base station. Here, the maximum ratio combining (MRC) technique is employed to reduce the average sample number (ASN) in order to reduce the sensing time. This proposed scheme is analyzed and simulated to illustrate the performance in comparison with the other given methods. Analysis and simulation are provided to validate the proposed method.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.7
• /
• pp.566-577
• /
• 1991

In this paper, the method of image segmentation based on a pyramid of reduced resolution versions of the input input image is persented. In a pyramid structure, two regions (a given pixel and its mother pixels) are compared by the proposed inverse-mother-son variance ratio (IMSVR) method for the detection of an optinal object pixel and are determined whether they are similar enough to be viewed as one region or disparate to be viewed as ditinct regions By the proposed method, an l`timal object pixel has been setectedat some level, it is necessary to retrieve its boundary precisely. Moving down the pyramid to levels of higher resolution is requires. In this paper, the top-sown pyramid traversing algorithm for an image segmentation using a pyrmid structure is presented. Using the computer simulation, the results by the proposed statistical method and object traversing method are investigated for the binary image and the real image at the results of computer simulation, the proposed method of image segmentation based on a pyramid structure seem to have useful properties and deserve consideration as a possible alternative to existing methods of omage segmentation. The computation for the proposed method is required 0 (log n), for an TEX>$n{\times}n$ input image.

• Journal of Information Processing Systems
• /
• v.12 no.3
• /
• pp.381-391
• /
• 2016

The Joint Bayesian (JB) method has been used in most state-of-the-art methods for face verification. However, since the publication of the original JB method in 2012, no improved verification method has been proposed. A lot of studies on face verification have been focused on extracting good features to improve the performance in the challenging Labeled Faces in the Wild (LFW) database. In this paper, we propose an improved version of the JB method, called the two-dimensional Joint Bayesian (2D-JB) method. It is very simple but effective in both the training and test phases. We separated two symmetric terms from the three terms of the JB log likelihood ratio function. Using the two terms as a two-dimensional vector, we learned a decision line to classify same and not-same cases. Our experimental results show that the proposed 2D-JB method significantly outperforms the original JB method by more than 1% in the LFW database.

• Journal of the Korean Chemical Society
• /
• v.47 no.2
• /
• pp.121-126
• /
• 2003

Tris(2-cyclohexylaminoethyl)amine (L) was synthesized by the Schiff base condensation reaction of tris(2-aminoethyl)amine with cyclohexanone, followed by reduction. The thermodynamic characteristics, mole ratio and formation constant of [Zn(II)-L] complex were measured by the cyclic voltammetry and isothermal titration. In the case of Zn(II), well-defined cathodic and anodic peak were obtained at -1.02V and -0.48V vs Ag/AgCl , respectively. For the [Zn(II)-L] complex, both peaks were obtained at -1.19V and -0.45V vs Ag/AgCl, respectively. In addition, the peak height gradually increases as the scan rate increases, suggesting that the currents obtained were diffusion - controlled. The mole ratio and stability constant of the complex measured cyclic voltammerty were 1:1 and logK$_f$= 5.8, respectively. And the mole ratio and stability constant of the complexe calculated by isothermal titration method was 1:1 and logK =5.4, respectively. ${\Delta}$H, ${\Delta}$G and T${\Delta}$S for the complex formation were -53.0 kJ/mol, -31.1 kJ/mol, and -21.9 J/K at 25 ${\circ}$C, respectively.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.721-729
• /
• 2014

We propose a novel phase-based method for single-channel speech enhancement to extract and enhance the desired signals in noisy environments by utilizing the phase information. In the method, a phase-dependent a priori signal-to-noise ratio (SNR) is estimated in the log-mel spectral domain to utilize both the magnitude and phase information of input speech signals. The phase-dependent estimator is incorporated into the conventional magnitude-based decision-directed approach that recursively computes the a priori SNR from noisy speech. Additionally, we reduce the performance degradation owing to the one-frame delay of the estimated phase-dependent a priori SNR by using a minimum mean square error (MMSE)-based and maximum a posteriori (MAP)-based estimator. In our speech enhancement experiments, the proposed phase-dependent a priori SNR estimator is shown to improve the output SNR by 2.6 dB for both the MMSE-based and MAP-based estimator cases as compared to a conventional magnitude-based estimator.

• Ocean and Polar Research
• /
• v.37 no.4
• /
• pp.333-340
• /
• 2015

The contrast (fish body to medium ratio) of density and sound speed were measured to estimate acoustic scattering from small juvenile cod (Gadus macrocephalus) with the Kirchhoff-Ray Mode backscatter model. The density contrast was measured by the density-bottle method and the sound speed contrast was estimated by the time of flight method. The results revealed that the measured density contrasts of juvenile cod varied between 1.003 and 1.029 (mean = 1.014, S.D. = 0.01). On the other hand, sound speed contrasts varied between 1.039 and 1.041 (mean = 1.041, S.D. = 0.001). The relationship between averaged target strength (TS) and total length (TL) established by the model were <$TS_{38kHz}$> = 20log(TL) - 68.8 and <$TS_{38kHz}$> = 20log(TL) - 69.4, respectively.