• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.87-91
• /
• 1997

This paper presents the modeling and analysis of dynamic characteristics of hydraulic snubber in electric power plant. The nonlinear state equations of 9th order to describe the dynamics of the snubber was established by Sirnulink. The simulation results show that the hydraulic snubber reacts as like the conventional shock absolvers to the high pulse shock load. The snubber also shows the peculiar characteristics to the small step load, which are temporary locking displacements of control valves and same steady-state pressures of all internal chambers in the snubber.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권5호
• /
• pp.459-464
• /
• 2013

A reset-free anti-harmonic programmable multiplying delay-locked loop (MDLL) that provides flexible integer clock multiplication for high performance clocking applications is presented. The proposed MDLL removes harmonic locking problems by utilizing a simple harmonic lock detector and control logic, which allows this MDLL to change the input clock frequency and multiplication factor during operation without the use of start-up circuitry and external reset. A programmable voltage controlled delay line (VCDL) is utilized to achieve a wide operating frequency range from 80 MHz to 1.2 GHz with a multiplication factor of 4, 5, 8, 10, 16 and 20. This MDLL achieves a measured peak-to-peak jitter of 20 ps at 1.2 GHz.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.353-356
• /
• 1999

A 3.3V PLL(Phase Locked loop) is designed for a high frequency, low voltage, and low power applications. This paper proposes a new PLL architecture to improve voltage to frequency linearity of VCO(Voltage controlled oscillator) with new delay cell. The proposed VCO operates at a wide frequency range of 30MHz~1㎓ with a good linearity. The DC-DC voltage up/down converter is utilized to regulate the control voltage of the two-stage VCO. The designed PLL architecture is implemented on a 0.6${\mu}{\textrm}{m}$ n-well CMOS process. The simulation results show a locking time of 2.6$\mu$sec at 1Hz, Lock in range of 100MHz~1㎓, and a power dissipation of 112㎽.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.389-401
• /
• 2018

An isoparametric six-node triangular element is utilized for geometrically nonlinear analysis of functionally graded (FG) shells. To overcome the shear and membrane locking, the element is improved by using strain interpolation functions. The Total Lagrangian formulation is employed to include the large displacements and rotations. Finding the nonlinear behavior of FG shells via laminated modeling is also the goal. A power function is employed to formulate the variation of elastic modulus through the thickness of shells. The results are presented in two ways, including the general FGM formulation and the laminated modeling. The equilibrium path is obtained by using the Generalized Displacement Control Method. Some popular benchmarks, including hyperbolical shell structures are solved to declare the correctness and accuracy of proposed formulations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.283-290
• /
• 1999

Recently, the ${\mu}$-processor based-controlled systems instead of conventional relays circuitry are widely used to industrial applications, and also those technology is available to railway signalings which are safety-critical systems. However, the safety and reliability of software for those systems are harder to demonstrate than in traditional relays circuitry because the faults or errors can not be analyzed and predicted to those systems. So, the safety problems are crucial more and more in ${\mu}$-processor based-controlled system. In this paper, the Grafcet language, the graphical and mathematical form, is used to obtain the high-level safety and reliability of software control logic. The general description for Grafcet notation are provided. And some partial of interlocking logic are formally modeled and simulated by Grafcet language and graphical windows.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2003년도 춘계학술발표논문집 (하)
• /
• pp.1563-1566
• /
• 2003

본 논문은 실시간 데이터베이스 환경에서의 동시성제어 프로토콜을 제안 그 성능을 향상시키고자 한다. 기존에 실시간 데이터베이스에서 주로 쓰이는 2PL-HP(2 Phase Locking with High Priority)의 방법은 높은 우선순위를 갖는 트랜잭션(HPT)의 선행 처리를 항상 보장하기 때문에 낮은 우선순위를 갖는 트랜잭션(LPT)의 철회 및 블로킹이 불가피하였다. 이러한 문제를 해결하고자 본 논문에서는 실시간 데이터베이스에 기존의 XAL의 기부연산을 확장하고 우선순위 개념을 도입해 LPT의 불필요한 철회 및 기다림을 방지할 수 있는 효율적인 동시성제어 프로토콜을 제안한다.

• 전산구조공학
• /
• 제10권2호
• /
• pp.139-148
• /
• 1997

A finite element method is programmed to analyse the nonlinear behavior of axisymmetric structures. The lst order Mindlin shell theory which takes into account the transversal shear deformation is used to formulate a conical two node element with six degrees of freedom. To evade the shear locking phenomenon which arises in Mindlin type element when the effect of shear deformation tends to zero, the reduced integration of one point Gauss Quadrature at the center of element is employed. This method is the Updated Lagrangian formulation which refers the variables to the state of the most recent iteration. The solution is searched by Newton-Raphson iteration method. The tangent matrix of this method is obtained by a finite difference method by perturbating the degrees of freedom with small values. For the moment this program is limited to the analyses of non-linear elastic problems. For structures which could have elastic stability problem, the calculation is controled by displacement.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.771-778
• /
• 2006

Before the Flap type GATE is introduced until, the Turnstile type GATE was plentifully used. The Turnstile type GATE is used plentifully from the Seoul metro, Busan Transportation Corporation and Korea Railroad Corporation. From the Turnstile type GATE, the micro switch breakdown is occurred by the contact of the micro switch which perceives a Turnstile rotation and the cam. The breakdown is cause of the passenger inconveniently. In order to prevent the breakdown which is caused by Micro switch contact, Microswitch support used the sensor in Turnstile rotation perception. The sensor which is used in test is Photo Sensor and Reed Sensor two type. The test result Reed Sensor was suitable in underground environment. When using the RF card, RF card processing came to be quick

• Journal of Electrical Engineering and information Science
• /
• 제2권5호
• /
• pp.89-99
• /
• 1997

The application for real-time database systems must satisfy timing constraints. Typically the timing constraints are expressed in the form of deadlines which are represented by priorities to e used by schedulers. In any real-time applications, since the system maintains sensitive information to be shared by multiple users with different levels of security clearance, security is another important requirement. As more advanced database systems are being used in applications that need to support timeliness while managing sensitive information, protocols that satisfy both requirements need to be developed. In this appear, we proposed a new priority-driven secure multiversion locking (PSMVL) protocol for real-time secure database systems. The schedules produced by PSMVL are proven to e one-copy serializable. We have also shown tat the protocol eliminates covert channels and priority inversions. The details of the protocol, including the compatibility matrix and the version selection algorithms are presented. the results of the performance comparisons of our protocol with other protocols are described.

• Smart Structures and Systems
• /
• 제20권6호
• /
• pp.729-737
• /
• 2017

Piezoelectric composite laminates are a powerful material system that offers vast options to improve structural behavior. Successful design of piezoelectric adaptive structures and testing of control laws call for highly accurate, reliable and numerically efficient numerical tools. This paper puts focus onto linear and geometrically nonlinear static and dynamic analysis of smart structures made of such a material system. For this purpose, highly efficient linear 3-node and 4-node finite shell elements are proposed. Both elements employ the Mindlin-Reissner kinematics. The shear locking effect is treated by the discrete shear gap (DSG) technique with the 3-node element and by the assumed natural strain (ANS) approach with the 4-node element. Geometrically nonlinear effects are considered using the co-rotational approach. Static and dynamic examples involving actuator and sensor function of piezoelectric layers are considered.