• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.433-448
• /
• 2012

A source-synchronous receiver based on a delay-locked loop is presented. It employs a shared global calibration control between channels, yet achieves channel expandability for high aggregate I/O bandwidth. The global calibration control accomplishes skew calibration, equalizer adaptation, and phase lock of all the channels in a calibration period, resulting in the reduced hardware overhead and area of each data lane. In addition, the weight-adjusted dual-interpolating delay cell, which is used in the multiphase DLL, guarantees sufficient phase linearity without using dummy delay cells, while offering a high-frequency operation. The proposed receiver is designed in the 90-nm CMOS technology, and achieves error-free eye openings of more than 0.5 UI across 9-28 inch Nelco4000-6 microstrips at 4-7 Gb/s and more than 0.42 UI at data rates of up to 9 Gb/s. The data lane occupies only $0.152mm^2$ and consumes 69.8 mW, while the rest of the receiver occupies $0.297mm^2$ and consumes 56.0 mW at the 7- Gb/s data-rate and supply voltage of 1.35 V.

• Therapeutic Science for Rehabilitation
• /
• v.7 no.3
• /
• pp.9-21
• /
• 2018

Objective : This systematic review aimed to evaluate the global literature on the effect of early intervention for preschool children with autism spectrum disorder (ASD). Methods : A literature search of the PubMed database identified 10 studies published up to December 2017, using the following search terms: autism, autism spectrum disorder, ASD, high-function autism, high-function ASD, Asperger syndrome, pervasive developmental disorder, PDDNOS, intervention, and early intervention. Results : Early intervention for children with ASD used Applied Behavior Analysis in 8 of the 10 selected studies. The other two studies used a Sensory Integration approach and Technology-based intervention. Most studies reported positive effects on communication skills, social interaction skills, intelligence, adaptive behavior, and improved attention through early intervention. Conclusions : These results suggested a basis for early intervention for children with ASD. Further research is needed to determine the effectiveness of early intervention.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.157-164
• /
• 2013

A damper clutch in automatic transmission systems has some advantages of fuel economy and dynamic performance. Although a damper clutch operation improves a fuel economy of the vehicles, a positive operation of a damper clutch in a low vehicle speed induces abnormal vibration. This paper analyzed one of reasons for abnormal vibration by a damper clutch operation in low engine speed ranges. A simulation model was designed to confirm the effects of a damper clutch operation under unstable regions of an engine. A theoretical analysis was carried out about an engine operation stability. Simulation was conducted to depict abnormal vibration by a damper clutch operation in unstable regions of an engine performance curve. The effects of an engine operation region for abnormal vibration by a damper clutch was investigated according to the range and the slope of unstable regions. As a result of simulations, a damper clutch operation would be better to avoid an engine unstable regions.

• Journal of KIISE:Databases
• /
• v.36 no.5
• /
• pp.399-404
• /
• 2009

In a multiple-server DBMS using the share-disk model, when a server process updates data, the updated ones are not immediately reflected to the buffers of the other server processes. Thus, the other server processes may read invalid data. In this paper, we propose a novel method to solve this problem. In this method the server process stores the identifiers and timestamps of the pages that have been updated during a transaction into the coherency volume when the transaction commits. Then, the server process invalidates its buffers of the pages updated by the other server processes by accessing the coherency volume when the lock is acquired, and, subsequently, read the up-to-date versions of the pages from disk. This method needs only a very small coherency volume and shows a good performance because the amount of data that need to be accessed is very small.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.3
• /
• pp.455-469
• /
• 1994

Regular radiographic examination has been considered an essential diagnositic method for osseointegrated dental implantation. This study investigated marginal bone loss through the measurement on periapical radiographs and changes in bone density through digital subtraction image radiographic method around 88 endoseous root-form dental implants in 43 human subjects. Four types of endosseous dental implants were investigated : Standard series, Mini series and Hex-lock system of Steri-Oss Dental implant system, and $Br{\aa}nemark$-type implant from 3i dental implant system, in a 3 month interval for a total period of 12 months. The results were as follows : 1. Rapid bone loss occurred in the first 3 months in all 4 groups, and the bone level stabilized at the first thread of the implant fixtures. Amount of bone loss for 12 months showed correlation with the length of the polished neck portion. 2. Most of the implant systems showed resorption of alveolar bone up to the polished neck portion although a long polished neck could delay the resolution. 3. Alveolar bone loss apical to the polished neck portion stabilized at the first thread of the fixtures with no correlation to either the time of exposure of the polished neck or types of implant systems. 4. No changes in bone density around the implant threads were observed throughout the experimental period. Bone density decreased at the marginal bone, and increased at the newly-formed alveolar crest. These results indicate that most of the alveolar bone loss occur within the first 12 months after installation of endosseous root-form dental implants resulting in the exposure of polished neck portions, and the bone level stabilizes thereafter at the first thread portions of the implant fixtures. The experimental period of 12 months seems insufficient for observing changes in bone density, and a long-term observation should be needed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.122-133
• /
• 2013

An arbiter-based simple phase decision circuit (PDC) optimized for high-resolution phase-to-digital converter made up of an analog phase-frequency detector and a time-to-digital converter for all-digital phase-locked loops is proposed. It can distinguish very small phase difference between two pulses even though it consumes lower power and has smaller input-to-output delay than the previously reported PDC. Proposed PDC is realized using 130-nm CMOS process and demonstrated by transistor-level simulations. A 5-bit P2D having no offset nor deadzone using the PDC is also demonstrated. A harmonic-lock-free and small-phase-offset delay-locked loop for fixing the P2D resolution regardless of PVT variations is also proposed and demonstrated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.865-871
• /
• 2016

This work presents a radar signal interferer to be used for evaluating the mutual interference among automotive radars. The developed interfering signal generator is composed of a reference signal generator and a 77 GHz transmitter. Reference signal generator is made up of commercial chips and board, it can generate various modulated signal such as triangular wave, sawtooth wave and random frequency hopping. The transmitter generates 77 GHz band signal by multiplying modulated reference signal frequency 28 times. Transmitter was fabricated using 65 nm CMOS process, it can operate horn antenna by built in on-chip waveguide feeder. The transmitter exhibited 7.31~8.06 dBm output power over a frequency lock range of 75.6~77 GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1780-1784
• /
• 2015

Traditional IP routing, see only the Destination Address When Forwarding Layer 3 routing and exchange information and Destination-Based Routing Lookup is required for all Hop. Thus, all routers Full Internet routing information, the route information of more than about 120,000 may require. Therefore, the router configuration, which can be dispersed in the environment, the traffic load is required in accordance with this congestion. In this study, a unique characteristic of the Internet in the environment of an existing network Best Effect for QoS guarantee and hardware high speed switching of large multimedia data transmitted using a Labeling for forwarding a packet environment configuration is required. Video Stream Broadcast Transport Labeling rather than in much of the higher performance of the multi-step policy to most of the Video Stream Packet deulim was fixed to Labeling Header Format proposes a method of applying an effective QoS policy to a more simplified policy.

• Clinics in Shoulder and Elbow
• /
• v.18 no.2
• /
• pp.91-95
• /
• 2015

Background: Our aim was to make a comparative analysis of radiological and clinical outcomes of using either one or two interlocking distal screws on a Polarus intramedullary nail for the internal fixation of humeral shaft fractures. Methods: From January 2008 to March 2014, we enrolled 26 patients with humeral shaft fractures who were operated on using intramedullary nails. The patients were divided into 2 groups according to how many interlocking distal screws were used to lock the Polarus nail: in group 1, a single interlocking distal screw was used in 12 patients; and in group 2, double interlocking distal screws, in 14 patients. We compared the degree of recovery of the displaced fracture fragments between the two groups. To compare the nonunion and shoulder function, we assessed each patient's modified American Shoulder and Elbow Surgerns (ASES) score. Results: We found that 10 of 12 fractures achieved union in group 1, and 13 of 14 fractures, in group 2. We did not find a meaningful difference in the time to bone union between the two groups. The percentage of recovery of displaced fracture fragments until union was 66.9% for group 1 and 59.41% for group 2. At the final follow-up, we found that the scores for shoulder joint modified ASES was 78.7 for group 1 and 80.7 for group 2. Conclusions: Our results show that if locked appropriately, even a single screw on a Polarus nail can provide satisfactory radiological union and improved clinical outcome after intramedullary nailing of humeral shaft fractures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.400-402
• /
• 2002

Recently, it is requested interoperability and inter-connection among technologies due to network externalities and the rapid innovation in the telecommunications industry. Firms are technically tied up with the others the survival in the keen competition age. The switching cost is caused when a consumer changes his existing service to new one in the telecommunications. The switching cost hinders consumers from making a choice of better services or goods, and obstruct the fair competition among firms. In this paper, we will examin the effects on the competition among companies of the switching cost, and suggest national policies to promote the competition in the telecommunication markets.