• 한국소음진동공학회논문집
• /
• 제21권8호
• /
• pp.708-713
• /
• 2011

U.S. nuclear regulatory commission(NRC) regulatory guide(RG) 1.20 requires a comprehensive vibration assessment program(CVAP) for use in verifying the structural integrity of reactor vessel internals(RVI) for flow-induced vibrations prior to commercial operation. The CVAP program consist of vibration and fatigue analysis, a vibration measurement program, an inspection program, and a correlation of their results. One of the main purposes of the analysis program is to select measurement locations, however measurement locations can not be determined by only analysis results, therefore we developed selection criteria of measurement locations for advanced power reactor 1400(APR1400) RVI CVAP, It will be used to select measurement locations and instrument types for APR1400 RVI CVAP.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.306-311
• /
• 2012

A reactor vessel internals comprehensive vibration assessment program (RVI CVAP) of an advanced power reactor 1400 (APR1400) is being performed as a non-prototype category-2 type of reactor based on the US Nuclear Regulatory Commission Regulatory Guide (NRC RG) 1.20. The aim of this paper is to present the results of structural response analysis and measuring locations of a upper guide structure (UGS) assembly of the APR1400 reactor. The analysis results of the UGS assembly results show that meet the specified integrity levels of the design acceptance criteria. Also, the measuring locations are set by the analysis results of the UGS assembly and selection criteria of measuring locations prior to this study. These analysis results and measuring locations will be used as fundamental materials to design a measurement system for the APR1400 RVI CVAP.

• 산업경영시스템학회지
• /
• 제30권3호
• /
• pp.28-36
• /
• 2007

Process Capability indices (PCIs) have been widely used in manufacturing industries to provide a quantitative measure of process performance. PCIs have been developed to represent process capability more exactly. In the previous studies, only one designated location on each part is measured. But even though in single process, multiple measurement locations on each part are required to calculate the reliable process capability. In this paper, we propose a new process capability index with multiple measurement locations on each part. We showed numerical examples and sensitivity analysis according to the number of measurement locations.

• 한국IT서비스학회지
• /
• 제9권3호
• /
• pp.145-161
• /
• 2010

Recently, identifying user locations is becoming important as the society evolves into an ubiquitous society with the innovation of information technology. Particularly, many researches on identifying user locations are headed in direction to identify locations of users in the indoors, because a GPS that is widely used to identify the locations of users in the outdoors is inapplicable in the indoors. However, those researches are mostly not useful to general indoor environment because they are performed in a specific environment with specialized or customized devices such as UWB, RFID. Therefore, in this paper we propose a effective method to identify user locations in general indoor environments with wireless local network access points. Our approach enables to identify user location efficiently by measuring signal power of access points around the user and using the FRIIS formula which is used to calculate the distance among the things.

• 조명전기설비학회논문지
• /
• 제25권5호
• /
• pp.61-66
• /
• 2011

An accidental disconnection of power supply for operating theatres may result in fatal accidents. Thus, it is necessary to import the electric safety system in medical locations. This paper shows an analysis of simulation for the safety in medical IT system based on KS C IEC 60364-7-710(Electrical Installations of Buildings - Requirements for special installations or locations - Medical locations). The analysis was progressed by measuring leakage currents according to variation of volts, circuits and loads. And it was made database for calculation the reasonable length of branch circuit.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.157-162
• /
• 2002

Recently, location based services, which make use of location information of moving objects, have obtained increasingly high attention. The moving objects are time-evolving spatial objects, that is, their locations are dynamically changed as time varies. Generally, GIS server stores and manages the spatial objects, of which locations are rarely changed. The traditional GIS server, however, has a difficulty to manage the moving objects, due to the fact of locations being frequently changed and the trajectory information (past locations of moving objects) being managed. In this paper, we have designed a moving object server, which stores and manages the locations in order to support various location based services. The moving object server is composed of a location acquisition component, a location storage component, and a location query component. The contribution of this paper is that we integrate the each work for location acquisition, storage, and query into a moving objects server.

• The Plant Pathology Journal
• /
• 제19권1호
• /
• pp.64-68
• /
• 2003

Cruciferous vegetable crops grown in several locations in Korea were surveyed from 1996 to 2000. Clubroot severely occurred up to a maximum of 100％ in Chinese cabbage fields in 15 out of 42 locations, and in cabbage fields in 5 out of 13 locations surveyed. The disease also severely occurred up to a maximum of 40％ in radish fields in 6 out of 35 locations, and up to a maximum of 40% and 100％ in turnip and brown mustard fields in one each out of the few locations surveyed, respectively. The disease occurred less than l％ in one kale field in one out of two locations surveyed. A total of 268 isolates of Plasmodiophora brassicae was obtained from six cruciferous vegetable crops. The isolates were classified into 13 races based on their pathogenicity to the differential varieties of cabbage and rutabaga. There were 13 races found in isolates from Chinese cabbage, while 6 races each were found in isolates from cabbage and radish. There were five and three races found in turnip and brown mustard isolates, respectively. One isolate from kale was identified as race 8. Race 8 was the most frequently isolated from five cruciferous vegetable crops, except brown mustard. Races 3 and 14 were isolated only from Chinese cabbage.

• 한국환경과학회지
• /
• 제26권9호
• /
• pp.1057-1072
• /
• 2017

In order to investigate the effect of air temperature reduction on an urban neighborhood park, air temperature data from five inside locations (forest, pine tree, lawn, brick and pergola) depending on surface types and three outside locations (Suwon, Maetan and Kwonsun) depending on urban forms were collected during the summer 2016 and compared. The forest location had the lowest mean air temperature amongst all locations sampled, though the mean difference between this and the other four locations in the park was relatively small ($0.2-0.5^{\circ}C$). In the daytime, the greatest mean difference between the forest location and the two locations exposed to direct beam solar radiation (brick and lawn) was $0.5-0.8^{\circ}C$ (Max. $1.6-2.1^{\circ}C$). In the nighttime, the mean difference between the forest location and the other four locations in the park was small, though differences between the forest location and locations with grass cover (pine tree and lawn) reached a maximum of $0.9-1.7^{\circ}C$. Comparing air temperature between sunny and shaded locations, the shaded locations showed a maximum of $1.5^{\circ}C$ lower temperature in the daytime and $0.7^{\circ}C$ higher in the nighttime. Comparing the air temperature of the forest location with those of the residential (Kwonsun) and apartment (Maetan) locations, the mean air temperature difference was $0.8-1.0^{\circ}C$, higher than those measured between the forest location and the other park locations. The temperatures measured in the forest location were mean $0.9-1.3^{\circ}C$ (Max. $2.0-3.9^{\circ}C$) lower in the daytime than for the residential and apartment locations and mean $0.4-1.0^{\circ}C$ (Max. $1.3-3.1^{\circ}C$) lower in the nighttime. During the hottest period of each month, the difference was greater than the mean monthly differences, with temperatures in the residential and apartment locations mean $1.0-1.6^{\circ}C$ higher than those measured in the forest location. The effect of air temperature reduction on sampling locations within the park and a relatively high thermal environment on the urban sampling locations was clearly evident in the daytime, and the shading effect of trees in the forest location must be most effective. In the nighttime, areas with a high sky view factor and surface types with high evapotranspiration potential (e.g. grass) showed the maximum air temperature reduction. In the urban areas outside the park, the low-rise building area, with a high sky view factor, showed high air temperature due to the effect of solar (shortwave) radiation during the daytime, while in the nighttime the area with high-rise buildings, and hence a low sky view factor, showed high air temperature due to the effect of terrestrial (longwave) radiation emitted by surrounding high-rise building surfaces. The effect of air temperature reduction on the park with a high thermal environment in the city was clearly evident in the daytime, and the shading effect of trees in the forest location must be most effective. In the nighttime, areas with high sky view factor and surface types (e.g., grass) with evapotranspiration effect showed maximum air temperature reduction. In the urban areas outside the park, the high sky view factor area (low-rise building area) showed high air temperature due to the effect of solar (shortwave) radiation during the daytime, but in the nighttime the low sky view factor area (high-rise building area) showed high air temperature due to the effect of terrestrial (longwave) radiation emitted surrounding high-rise building surfaces.

• Korean Journal of Acupuncture
• /
• 제24권2호
• /
• pp.113-127
• /
• 2007

Objectives : To inform the 5th WHO Informal Consultation meeting on Development of International Standard Acupuncture Point Locations, held in Osaka, Japan, on September $27{\sim}29$, 2005. Results and Conclusions : Nine experts from Korea, China and Japan discussed the principles of acupuncture points locations and the point locations of 33 controversial acupoints that were not agreed at the previous meeting, as well as 328 non-controversial points that all 3 nations agreed on the locations to confirm the expression of every single point. Through this meeting, the locations of ST30, SP12, LR7 and expressions of LU6, LI8, LI9, LI10, LI 13, SP13, BL60, KI3, GB38, LR11, LR12 were agreed. Furthermore, locations of BL39, GB27, GB28 were confirmed out of 6 non-discussed points. However, several points were still required to held additional meeting to discuss. That includes LI19, LI20, ST36, ST37, ST38, ST39, SI6, KI9, PC8, PC9, TE9, TE17, TE23, GB7, GB30, GV26. In addition, foundation for the international society for the acupuncture point location was proposed to make a regular revision of standard acupuncture point location.

• Journal of Biosystems Engineering
• /
• 제41권3호
• /
• pp.153-160
• /
• 2016

Purpose: This study was conducted to experimentally investigate the structural safety of and identify critical locations in a front-end loader under impact loads. Methods: Impact and static tests were conducted on a commonly used front-end loader mounted on a tractor. In the impact test, the bucket of the front-end loader with maximum live load was raised to its maximum lift height and was allowed to free fall to a height of 500 mm above the ground where it was stopped abruptly. For the static test, the bucket with maximum live load was raised and held at the maximum lift height, median height, and a height of 500 mm from the ground. Strain gages were attached at twenty-three main locations on the front-end loader, and the maximum stresses and strains were measured during respective impact and static tests. Results: Stresses and strains at the same location on the loader were higher in the impact test than in the static test, for most of measurement locations. This indicated that the front-end loader was put under a severe environment during impact loading. The safety factors for stresses were higher than 1.0 at all locations during impact and static tests. Conclusions: Since the lowest safety factor was higher than 1.0, the front-end loader was considered as structurally safe under impact loads. However, caution must be exercised at the locations having relatively low safety factors because failure may occur at these locations under high impact loads. These important design locations were identified to be the bucket link elements and the connection elements between the tractor frame and front-end loader. A robust design is required for these elements because of their high failure probability caused by excessive impact stress.