• 한국산업융합학회 논문집
• /
• 제25권4_1호
• /
• pp.505-511
• /
• 2022

The objective of this article is finding optimized locations of active mounts applied to 6-DOF beam structure with two active paths. When sinusoidal excitation forces are applied to the beam structure, secondary forces from two active mounts which can minimize (ideally becoming zero) transmitted forces are calculated mathematically and the vibration attenuation performance is validated through computer simulations. When the force applied to two active mounts are relatively low, those specific locations are considered as optimized location of active mounting system. As the location of mount changes, amplitude and phase of secondary forces in each path are analyzed with 3D plots. Based on the simulation results, a criterion for selecting mounting location is suggested and it would be very useful for selecting actuators for active mounts appropriately.

• 한국멀티미디어학회논문지
• /
• 제10권12호
• /
• pp.1733-1740
• /
• 2007

In this paper, we propose a wireless location-based routing algorithm which uses the location information of its neighbor nodes and a destination node. At first, the proposed routing algorithm forwards a packet to the X direction by selecting a closest node to its destination as a next hop in terms of the X coordinate until the packet reaches closely to the packet's destination. Then the packet is forwarded to the Y direction by selecting a closest node to its destination in terms of the Y coordinate. We use a back off mechanism in case that a next hop cannot be found using the proposed routing algorithm, which resolves loops while forwarding. The experimental results show that the proposed routing algorithm performs well like the existing routing algorithms Ad hoc On-demand Distance Vector and Greedy Perimeter Stateless Routing. It is expected to use the proposed routing algorithm in the digital battlefield of military environments and survival games of commercial environments.

• Journal of Communications and Networks
• /
• 제8권1호
• /
• pp.85-92
• /
• 2006

In this paper, we study a wireless cellular network design problem. It consists of selecting the location of the base station controllers and mobile service switching centres, selecting their types, designing the network into a tree-topology, and selecting the link types, while considering the location and the demand of base transceiver stations. We propose a constraint programming model and develop a heuristic combining local search and constraint programming techniques to find very good solutions in a reasonable amount of time for this category of problem. Numerical results show that our approach, on average, improves the results from the literature.

• 대한공간정보학회지
• /
• 제17권4호
• /
• pp.75-80
• /
• 2009

봉수대는 예로부터 조선시대에 이르기까지 국방 및 통신에서 중요한 역할을 해왔다. 그동안의 봉수대에 대한 연구는 고문헌을 통한 조사에 집중되었다. 본 연구에서는 봉수대 입지 선정에 영향을 주는 요소들인 고도, 단면도, 봉수대간의 거리 및 가시권 등의 지형요소를 분석하였다. 그리고 봉수대의 입지 선정 시 지형적 요소가 어떻게 고려되었는지 분석하였다. 분석 결과 봉수대의 지형 특성은 신호전달에서는 봉수대간의 거리와 가시거리가 상관이 있었고 조망에 있어서는 해안과의 거리와 가시범위가 상관이 있었다. 봉수대의 위치 선정에 있어서는 한가지의 지형요소뿐만 아니라 어려 지형요소들이 복합적으로 고려되었다고 생각된다.

• Korean Chemical Engineering Research
• /
• 제58권4호
• /
• pp.573-580
• /
• 2020

최근 석유를 대체할 수송 에너지원으로 수소에 대한 관심이 커지고 있다. 수소의 장점을 극대화하기 위해서는 수소 충전소가 많이 보급되어야 한다. 본 논문은 수소 충전소를 보다 가깝게 이용 할 수 있는 최적 위치 선정 방법론을 제안하였다. 기존 에너지의 공급처인 주유소와 천연가스 충전소의 위치를 우선 참고하고, 인구, 등록 차량 수 등의 데이터를 추가 반영하여 수소자동차의 예상 충전 수요를 계산하였다. 기계 학습(machine learning) 기법 중 하나인 k-중심자 군집화(k-medoids Clustering)를 이용하여 예상 수요에 대응하는 최적 수소 충전소 위치를 계산하였다. 제안된 방법의 우수성은 서울의 사례를 통해 수치적으로 설명하였다. 본 방법론과 같은 데이터 기반 방법은 향후 수소의 보급 속도를 높여 환경친화적인 경제 체계를 구축하는데 기여할 수 있을 것이다.

• 한국콘텐츠학회논문지
• /
• 제11권4호
• /
• pp.440-447
• /
• 2011

적지선정은 이용목적에 적합한 공간 또는 속성조건을 인자로 정하고 이를 만족하는 지역을 선정하는 것으로 체계적으로 수행되어야 한다. 본 연구는 계층적 분석과정과 GIS분석 모델링 방법을 이용하여 주거지 개발의 합리적인 적지선정을 시도한 것이다. 연구에서 적지선정을 위해 공간적 속성적 분석방법을 계층화하였으며 단계 별 효율적 결과도출을 위해 GIS분석 모델을 사용하였다. 다음 단계로, 적지선정 조건과 의사결정요소들을 유기적으로 고려하여 정량적 정성적인 평가지표를 만들고 요소들의 경중에 따라 가중치를 적용하였다. 특히, 주관적 평가요소인 경관에 대한 심미적인 요소를 반영하기 위해 3차원 지형모델의 시뮬레이션기법을 사용하였으며 계층적기법을 도입한 정성적인 평가요소로 고려하였다. 연구결과, 계층적 GIS모델분석으로 신속, 정확하게 복합적인 요구조건을 만족하는 적지를 선정할 수 있었다.

• 환경영향평가
• /
• 제19권6호
• /
• pp.563-571
• /
• 2010

In carrying out the prior review on environmental conditions for basic plan of public waters reclamation, the important item is review on conditions of location on prearranged reclaimed land. In this study, environmental assessment which needs careful consideration in the first stage of selecting location is presented by analyzing environmental impact assessment on public waters reclamation projects for about 10 years. The assessment index for alternative comparison is divided into two parts according to importance level. What is most important in alternative comparison is the comparison on direct influence due to reclamation. In other words, it figures out damaged extent of natural shoreline as well as intertidal and infralittoral zones. Comparing influence extent due to reclamation through the 1st comparison on this is regarded as to be important. In case there is no significant difference by alternatives through the 1st assessment, the 2nd assessment should be carried out. In the 2nd assessment indexes are damaged quantity of benthic organism, change in seawater current, erosion, accumulation and exchangeable rate of seawater. The plan for selecting optimal location which minimizes environmental influence in establishing public waters reclamation plan is demonstrated through model cases. For this, 3 districts which have similar environment and scale are selected, and then comparison on location alternative is made through environmental assessment index. In addition, the comparison on 3 arrangement alternatives are conducted, targeting certain areas. It is thought that carrying out comparison review on respective areas in the same cities and counties, not merely comparing arrangement plan by selecting 1 targeting area in advance, is the most appropriate. Besides, selection of arrangement plan considering environment, which minimizes damage of natural shoreline and influence due to change of seawater current is required in alternative comparison on arrangement plan as well. In case of the prior review on environmental conditions though alternative comparison method presented in this study is carried out, it is safely said that the influence on ocean environment due to public waters reclamation can be minimized.

• 한국해양공학회지
• /
• 제19권4호
• /
• pp.56-65
• /
• 2005

This study aims at selecting optimum locations for cruise terminal This study uses the HFP(Hierarchical Fuzzy Process) based on the fuzzy theory, which is known to be effective in evaluating a complicated system whose evaluation attribut are vague or overlapping with one another such as the elements in selecting cruise terminal location and in treating both qualitative and quantitative data.

• Communications for Statistical Applications and Methods
• /
• 제11권3호
• /
• pp.609-617
• /
• 2004

To present graph of probability densities, many softwares and graphical tools use methods that link points or straight lines. However, the methods can't display exactly and smoothly the graph and are not efficient from the viewpoint of process time. One method to overcome these shortcomings is utilizing interpolation methods. In these methods, selecting the number and location of knots is an important factor. This article proposes an algorithm to select knots for graphically presenting densities and implements graph components based on the algorithm.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1163-1171
• /
• 2017

The problem of fault current to exceed the rated capacity of a power circuit breaker can cause a serious accident to hurt the reliability of the power system. In order to solve this issue, current limiting reactors and circuit breakers with increased capacity are utilized but these solutions have some technical limitations. Back-to-back high voltage direct current(BTB HVDC) may be applied for reducing the fault current. When BTB HVDCs are installed for reduction in fault current, selecting the optimal location of the BTB HVDC without causing overload of line power becomes a key point. In this paper, we use genetic algorithm to find optimal location effectively in a short time. We propose a new methodology for determining the BTB HVDC optimal location to reduce fault current without causing overload of line power in metropolitan areas. Also, the procedure of performing the calculation of fault current and line power flow by PSS/E is carried out automatically using Python. It is shown that this optimization methodology can be applied effectively for determining the BTB HVDC optimal location to reduce fault current without causing overload of line power by a case study.