• 자원환경지질
• /
• 제37권5호
• /
• pp.521-532
• /
• 2004

본 연구의 목적은 강릉지역에 대해 산사태 취약성을 GIS와 원격탄사를 이용하여 평가하는 것이다. 이를 위해 산사태 위치는 위성영상 해석 및 현지 조사를 통해 확인되었고, GIS와 원격탐사를 이용하여 지형도, 토양도, 지질도, 선구조도, 토지피복도 등이 수집되고, 처리된 후 공간 데이터베이스로 구축되었다. 확률 기법인 빈도비 모델을 이용하여 산사태와 경사, 경사방향, 곡률, 수계, 지형종류, 토질, 토양모재, 토양배수, 유효토심, 임상종류, 임상경급, 임상영급, 임상밀도, 암상, 토지피복도, 선구조도 등 산사태 발생 요인들과의 관계를 계산하여 빈도비를 구하였다. 그리고 이러한 빈도비를 모두 더하여 산사태 취약성 지수를 계산하였으며, 이러한 취약서 지수를 모두 더하여 취약성도를 작성하였다. 그 결과는 실제 산사태 위치자료를 이용하여 검증 및 교차 검증되었고, 그 검증 결과는 산사태 취약성도와 산사태 위치와 밀접한 관계가 있었다.

• 디지털산업정보학회논문지
• /
• 제12권2호
• /
• pp.15-24
• /
• 2016

GPS(Global Positioning System) location tracking is a method for taking the precise coordinates after the coordinates are obtained by a GPS receiver, and displaying them on the map. In this paper with WAVE(Wireless Access for Vehicular Environment) simulation, we show that various services such as vehicle tracking service, real-time road conditions service and logistics can go tracking service, control and operation services according to the vehicle position and the traveling direction by using the GPS position data. A vehicle tracking system using GPS is automatically able to manage multiple RCP when exchanging data between RMA and the RCP, and it provides rapid requests and responses. To verify that multiple sessions between RMA and RM, as well as multiple sessions between RMA and RCP are able to be implemented, we take RMA as a RCP application on an OBU, until the RMA is receiving data response from corresponding RM. As a result of this experiment, we show that the response speeds of single session between RMA and RM using 1, 2, 3, and 4 kbyte unit data are similar, 62.32ms, 62.65ms, 63.02ms, and 63.48ms, respectively. Likewise, those of 128 muliple sessions using 1, 2, 3, and 4 kbyte unit data are not much more time difference, 298.08ms, 302.21ms, 322.85ms, and 329.62ms, respectively.

• Journal of Biosystems Engineering
• /
• 제34권4호
• /
• pp.278-285
• /
• 2009

Navigation system is applied in variety of fields including the simple location positioning, autopilot navigation of unmanned robot tractor, autonomous guidance systems for agricultural vehicles, construction of large field works that require high precision and map making process. Particularly utilization of GPS (Global Positioning System) is very common in the present navigation system. This study introduces a navigation system for autonomous field robot that travels to the pre-input path using GPS information. Performance of the GPS- based navigation is highly depended on its receiving rate because GPS receivers do not acquire any navigation information in the period between the refresh intervals. So this study presents an algorithm that improves an accuracy of the navigation by estimation the positional information during the blind period of a low rate GPS receiver. In fact the algorithm calculated the robot's heading in a 50 Hz rate, so the blind period of an 1 Hz GPS receiver is extensively covered. Consequently implementation of the algorithm to the GPS based navigation showed an improvement in guidance accuracy. The conventional field robot directly carried an expensive control computer and sensors onboard, therefore the miniaturization and weight reduction of the robot was limited. In this paper, the field robot carried only communication equipments such as GPS module, normal RC receiver, and bluetooth modem. This enabled the field robot to be built in an economic cost and miniature size.

• 보건행정학회지
• /
• 제27권3호
• /
• pp.229-240
• /
• 2017

Background: This study purposed to analyze the spatial accessibility of women in childbearing age to the healthcare organizations (HCOs) providing delivery services in Gangwon-do. Methods: Network analysis was applied to assess the spatial accessibility based on the travel time and road travel distance. Travel time and travel distance were measured between the location of HCOs and the centroid of the smallest administrative areas, eup, myeon, and dong in Gangwon-do. Korean Transport Database Center provided road network GIS (Geographic Information System) Database in 2015 and it was used to build the network dataset. Two types of network analysis, service area analysis and origin-destination (OD)-cost matrix analysis, applied to the created network dataset. Service area analysis defined all-accessible areas that are within a specified time, and OD-cost matrix analysis measured the least-cost paths from the HCOs to the centroids. The visualization of the number of the HCOs and the number of women in childbearing age on the Ganwon-do map and network analysis were performed with ArcGIS ver. 10.0 (ESRI, Redlands, CA, USA). Results: Twenty HCOs were providing delivery services in Gangwon-do in 2016. Over 50% of the women in childbearing age were aged more than 35 years. Service area analysis found that 89.56% of Gangwon-do area took less than 60 minutes to reach any types of HCOs. For tertiary hospitals, about 74.37% of Gangwon-do area took more than 60 minutes. Except Wonju-si and Hoengseong-gun, other regions took more than 60 minutes to reach the tertiary hospital. Especially, Goseong-gun, Donghae-si, Samcheok-si, Sokcho-si, Yanggu-gun, Cheorwon-gun, and Taebaek-si took more than 100 minutes to the tertiary hospital. Conclusion: This study provided that the accessibility toward the tertiary hospital was limited and it may cause problems in high-risk delivery patients such as over 35 years. Health policy makers will need to handle the obstetric accessibility issues in Gangwon-do.

• 한국측량학회지
• /
• 제25권6_1호
• /
• pp.507-516
• /
• 2007

Segmentation and organization of the LiDAR (Light Detection and Ranging) data of the Earth's surface are difficult tasks because the captured LiDAR data are composed of irregularly distributed point clouds with lack of semantic information. The reason for this difficulty in processing LiDAR data is that the data provide huge amount of the spatial coordinates without topological and/or relational information among the points. This study introduces LiDAR data segmentation technique by utilizing histograms of the LiDAR height image data and analyzing roof shape for 3D reconstruction and visualization of the buildings. One of the advantages in utilizing LiDAR height image data is no registration required because the LiDAR data are geo-referenced and ortho-projected data. In consequence, measurements on the image provide absolute reference coordinates. The LiDAR image allows measurement of the initial building boundaries to estimate locations of the side walls and to form the planar surfaces which represent approximate building footprints. LiDAR points close to each side wall were grouped together then the least-square planar surface fitting with the segmented point clouds was performed to determine precise location of each wall of an building. Finally, roof shape analysis was performed by accumulated slopes along the profiles of the roof top. However, simulated LiDAR data were used for analyzing roof shape because buildings with various shapes of the roof do not exist in the test area. The proposed approach has been tested on the heavily built-up urban residential area. 3D digital vector map produced by digitizing complied aerial photographs was used to evaluate accuracy of the results. Experimental results show efficiency of the proposed methodology for 3D building reconstruction and large scale digital mapping especially for the urban area.

• 농촌계획
• /
• 제13권1호
• /
• pp.73-84
• /
• 2007

The first theme of this study is to preserve and manage rural multi-functionality resource Information. This study is to suggest the method that can irradiate rural multi-functionality resource Information efficiently and constructively. GIS uses PDA and Tablet PC as an investigation tool and verifies the outcome of the development in the investigation system. This study enhanced the mobility function of PDA by installing recording system and camera to the PDA. Also, Using GPS has been ensured scientific precision and realism to the investigation. Direct input on spot can save time, cost and minimize human error by simplifying the investigation process. Database is composed of characters like scale, form, location, distance, resident's opinion and image of 37 resources. The survey system was applied in 170 villages and got a total of 12,270 resources data. Management system should be easy to input and output the surveyed information and to get reports in any kind of form ( i.e. final result can be produced as a map). By utilizing of the Rural Resource information system, the study made a simulation to compare the target areas before and after. Also, digitalized investigation system, minimized re-input and reprocessing of data and enabled to simplify and standardize the process than memorandum investigation. Data collected through digital system could offer people useful information by Web-GIS. It was need to specify practical way in decision-making and a way to measure the value of resources to align with the regional plan. Also, need to keep on developing statistical data and application program that can connect us to present the best solution to support regional planning. Therefore, quality of data is very important. Finally, it is very important to develop various programs to analyze space md rural resource by monitoring rural environment.

• 한국측량학회지
• /
• 제38권4호
• /
• pp.383-390
• /
• 2020

이동식차량측량시스템(이하 MMS)는 정밀도로지도를 제작하는데 가장 효과적인 도구이다. MMS는 다양한 센서의 조합으로 이루어져 있으며, 제조사별로 제작방법과 처리 소프트웨어가 다르기 때문에 부품의 사양만으로 성능을 예측할 수 없다. 따라서 성능평가를 통해 각 장비가 정밀도로지도 제작에 적합한지 판단을 해야 하며, 주기적인 성능평가를 위한 시설이 필요하다. 본 연구에서는 한국건설기술연구원의 SOC실증연구센터에 구축한 MMS 성능평가시설에 대해 설명하고, 문헌조사와 실험을 통해 평가시설이 갖추어야 할 조건에 대해 분석하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권5호
• /
• pp.939-955
• /
• 2010

With the progress of IT and mobile positioning technologies, various types of location-based services (LBS) have been proposed and implemented. Finding a shortest path between two nodes is one of the most fundamental tasks in many LBS related applications. So far, there have been many research efforts on the shortest path finding problem. For instance, $A^*$ algorithm estimates neighboring nodes using a heuristic function and selects minimum cost node as the closest one to the destination. Pruning method, which is known to outperform the A* algorithm, improves its routing performance by avoiding unnecessary exploration in the search space. For pruning, shortest paths for all node pairs in a map need to be pre-computed, from which a shortest path container is generated for each edge. The container for an edge consists of all the destination nodes whose shortest path passes through the edge and possibly some unnecessary nodes. These containers are used during routing to prune unnecessary node visits. However, this method shows poor performance as the number of unnecessary nodes included in the container increases. In this paper, we focus on this problem and propose a new border line-based pruning scheme for path routing which can reduce the number of unnecessary node visits significantly. Through extensive experiments on randomly-generated, various complexity of maps, we empirically find out optimal number of border lines for clipping containers and compare its performance with other methods.

• 한국공간정보시스템학회 논문지
• /
• 제5권2호
• /
• pp.23-31
• /
• 2003

정보화 사업의 결과로 전 국토에 대한 수치지도 및 여러 가지 주제도 제작이 완료되었다. 건물도로 및 교량 등과 같은 인공적 지형지물과 하천과 같은 자연적 지형지물을 포괄하는 모든 지형지물을 체계적으로 관리하고 활용하기 위한 체계화된 관리체계가 필요하나, 지형지물의 관리기관별 DB가 불일치하여 국가적 지리정보체계의 통합관리가 어려운 실정이다. 그러므로 본 연구에서는 지형지물의 관리, 검색, 활용에 공통키로 사용될 수 있고, 또한 식별자만으로 위치 판단이 가능하고, 정보의 일관성 및 NGIS DB의 체계적 관리를 할 수 있는 지형지물 유일식별자(UFID)를 부여하는 체계와 방법을 제시하였다.

• 한국정보통신학회논문지
• /
• 제15권10호
• /
• pp.2272-2278
• /
• 2011

원양어선을 보유한 회사에서 조업 중인 어선의 항해정보를 파악하기 위해 기존의 수작업에 의한 항해 현황판을 개선할 필요가 있다. 본 논문에서는 인터넷에 연결된 PC 또는 DID(Digital-Information Display)를 통해 선박 항해 위경도 표시 및 어획량 등 각종 항해 정보를 지도기반에서 visual하게 display하도록 설계한다. DB에 저장된 항해중인 37척의 원양어선 항해정보를 Flash 기술 기반의 RIA(rich Internet application)를 통해 역동적으로 화면구현이 가능한 Web Application 구축에 중점을 두었다. 다수의 어선상태를 한 화면에서 실시간으로 파악할 수 있기 때문에 항해정보를 모니터링하고, 의사결정을 신속히 가능하게 함으로 운영자 및 사용자에게 정보사용의 만족도를 높일 수 있었다.