• Journal of Mechanical Science and Technology
• /
• v.16 no.4
• /
• pp.454-467
• /
• 2002

It has been established that a crack has an important effect on the dynamic behavior of a structure. This effect depends mainly on the location and depth of the crack. Toidentifythelocation and depth of a crack in a structure, a method is presented in this paper which uses neuro-fuzzy-evolutionary technique, that is, Adaptive-Network-based Fuzzy Inference System (ANFIS) solved via hybrid learning algorithm (the back-propagation gradient descent and the least-squares method) and Continuous Evolutionary Algorithms (CEAs) solving sir ale objective optimization problems with a continuous function and continuous search space efficiently are unified. With this ANFIS and CEAs, it is possible to formulate the inverse problem. ANFIS is used to obtain the input(the location and depth of a crack) - output(the structural Eigenfrequencies) relation of the structural system. CEAs are used to identify the crack location and depth by minimizing the difference from the measured frequencies. We have tried this new idea on beam structures and the results are promising.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1212-1216
• /
• 2014

This study aims to find out the best anode location for buried pipelines. Numerical simulation program known as CATPRO (Elsyca, Belgium) were used for confirming the best location of anodes and the effects of impressed current cathodic protection system. Applied conditions for numerical simulation were similar to on-site environmental conditions for optimal application of cathodic protection system. Used criterion of cathodic protection was NACE SP 0169, which describes that minimum requirement for cathodic protection is -850mV vs. CSE. Various layouts for anodes' installation were applied, which were distance between anodes, anode installation location, and applied current. The areas where cathodic protection potential was lower than -850mV vs. CSE was limited up to 50m from anode installation locations. It was founded numerical analysis obtain cost-effective and efficient cathodic protection methods before design and application the impressed cathodic protection system to on-site environment.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.607-612
• /
• 2008

The groove rolling is a process that transforms the bloom or billet into a shape with circular section through a series of rolling. Inhibition of surface defect generation in groove rolling is a matter of great importance and therefore many research groups proposed a lot of models to find the location of surface defect initiation. In this study, we propose a model for maximum shear stress ratio over equivalent strain to catch the location of surface defect onset. This model is coupled with element removing method and applied to box groove rolling of POSCO No.3 Rod Mill. Results show that proposed model in this study can find the location of surface defect initiation during groove rolling when finite element analysis results is compared with experiments. The proposed criterion has been applied successfully to design roll grooves which inhibit the generation of surface defect.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.141-147
• /
• 2007

In this paper, we define the multi-states exponential cell resident time mobility model for describing the mobility characteristics of mobile user and analyzed the total cost of the hybrid method using multi-states cell resident time. Generally, the mobile user has three states for its movement, such as staying, walking and driving. This multi-states cell resident time based hybrid method reflects the movement characteristics of mobile user and adapts the location update period according to the states of mobility speed. As a results of the performance analysis, we can get the optimum parameters of the hybrid method for multi-states based mobile users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.10
• /
• pp.2605-2619
• /
• 1996

In this paper, we evaluated performance of mobile exchange control part. Queueing network model is used for modeling of mobile exchange control part. We developed a call control processing and location registration scenartio which has a message exchange function between processors in mobile exchange control part. A network symbol are used the simulation models that are composed of the initialization module, message generation module, message routing module, message processing module, message generation module, HIPC network processing module, output analysis module. as a result of computer simulation, we obtain the processor utilization, the mean queue length, the mean waiting time of control part based on call processing and location registration capacity. The call processing and location registration capacity is referred by thenumber of call attempts in the mobile exchange and must be satisfied with the quality of service(delay time).

• KIEE International Transactions on Power Engineering
• /
• v.3A no.2
• /
• pp.79-84
• /
• 2003

Unbalanced systems, such as distribution systems, have difficulties in fault locations due to single-phase laterals and loads. This paper proposes new fault locations developed by the direct three-phase circuit analysis algorithms using matrix inverse lemma for the line-to-ground fault case and the line-to-line fault case in unbalanced systems. The fault location for balanced systems has been studied using the current distribution factor, by a conventional symmetrical transformation, but that for unbalanced systems has not been investigated due to their high complexity. The proposed algorithms overcome the limit of the conventional algorithm using the conventional symmetrical transformation, which requires the balanced system and are applicable to any power system but are particularly useful for unbalanced distribution systems. Their effectiveness has been proven through many EMTP simulations.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.253-260
• /
• 2022

Existing web-based cost databases have proved invaluable for construction cost estimating. These databases have been utilized to compute approximate cost estimates using assembly rates, unit rates, and etc. These web-based databases can be used independently with traditional cost estimation methods (manual methods) or used to support BIM-based cost estimating platforms. However, these databases are rigid, costly, and require a lot of manual inputs to reflect recent trends in prices or prices relative to a construction project's location. To address this gap, this study integrated deep learning techniques with web-based price analysis to develop a database that incorporates a project's location cost estimating standards and current cost trends in generating a cost estimate. The proposed method was tested in a case study project in Lagos, Nigeria. A cost estimate was successfully generated. Comparison of the experimental results with results using current industry standards showed that the proposed method achieved a 98.16% accuracy. The results showed that the proposed method was successful in generating approximate cost estimates irrespective of project's location.

• Journal of the Korean housing association
• /
• v.19 no.4
• /
• pp.11-20
• /
• 2008

The purpose of this study is to gather baseline data on perceived housing values and satisfaction rates among consumers with the aim of using this information for future planning. Self-administered questionnaires were provided to 1000 university students from Gwangju and the Chonnam area from 2007 October 8th to 30th. The collected data was used to conduct comparative and descriptive statistical analysis: factor analysis, cluster analysis, t-test, $x^2-test$ and one-way ANOVA. The main findings are as follows: Firstly, in relation to perceived house values, students identified three factors as important: pursuit of convenience, disposition toward individuality-orientation and consciousness of others. The respondents regarded convenience as very important, especially in regard to one's safety, health and location of amenities. Secondly, cluster analysis based on perceived house value revealed passive and energetic types. Students in the energetic type exhibited a tendency to prefer convenience, independence, and consciousness of others. Finally in terms of housing satisfaction, the respondents identified four factors as important: house quality, neighborhood environment, local socio-psychological environment, and location. Housing satisfaction was higher among students who lived in large or new houses, shared the same house with their family, and had a room all to themselves. Accoding to these findings, university students important value safety, health and environmental-friendliness in a house and they find location important. Therefore, future houses should reflect these wants.

• Journal of Mechanical Science and Technology
• /
• v.14 no.9
• /
• pp.935-946
• /
• 2000

Elastic-plastic stress analysis has been performed to evaluate the fatigue life of an autofrettaged pressure vessel containing cross-bores subjected to pulsating internal pressure of 200 MPa. Finite element analyses were used to calculate the residual and operating stress distributions of the pressure vessel due to the autofrettage process and pulsating internal pressure, respectively. Theoretical stress concentration factors of 3.06, 2.58, and 2.64 were obtained at the cross-bore of the pressure vessel due to internal pressure, 50%, and 100% autofrettage loadings, respectively. Local stresses and local strains determined from the elastic-plastic finite element analysis were employed to calculate the failure location and fatigue life of the pressure vessel with radial cross-bores, incorporating the low-cycle fatigue properties of the pressure vessel steel and fatigue damage parameters. Increase in the amount of overstrain by autofrettage process moved the crack initiation location from the inner radius toward a mid-wall, and extended the crack initiation life. Predicted fatigue life of the fully autofrettaged pressure vessel with cross-bores increased about 50%, compared to the unautofrettaged pressure vessel. At the autofrettage level higher than 50%, the failure location and fatigue life of the pressure vessel were not significantly influenced by the autofrettage level.

• Journal of Information Technology Applications and Management
• /
• v.12 no.1
• /
• pp.157-172
• /
• 2005

Recently, location-based service (LBS) is a hot issue in the field of computer applications. So many papers introducing new techniques of implementing a LBS and new application fields of LBS have been published recently. However, to the best of our knowledge, none of them discusses feasibility test in the prior to the implementation. The importance of a feasibility test for a design prior to the implementation cannot be overemphasized. This paper presents a method of feasibility test for a LBS design. Our method performs three steps. At the first step, we build a Petri net model of the LBS system which is depicted in natural language. The second step is to analyse the Petri net to find errors and flaws in the design. We also improve the Petri net model by fixing the errors and flaws in this step. A feasibility test is the third and final step. In this step. we verify if the design satisfies the user's requirement in the senses of quality of service (QoS) and of minimizing the implementation cost. The third step is performed in the manner of mathematical analysis of the Petri net.