• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.58-63
• /
• 2004

This study is to investigate a fracture characteristics of carbon fiber reinforced plastics (CFRP) under the tensile loading as a function of acoustic emission (AE) according to the frequency analysis (transient mode) and AE source location (location mode). It was found that the fracture mechanism of AE frequency analysis was a useful tool for the estimation of different type of fracture in CFRP, i.e., matrix(epoxy resin) cracking, delamitation and fiber breakage same as AE amplitude distribution.

• Economic and Environmental Geology
• /
• v.33 no.6
• /
• pp.547-556
• /
• 2000

The purpose of this study is to analyze shear fracture system using landslide location occurred 1998 at Janghung area. For the geological implication, foliation was surveyed and analyzed, and location of landslide, geological structure and topography were constructed into spatial database using GIS. With the constructed spatial database, shear fracture system was assessed by the relation analysis between strike and dip of the foliation and aspect and slope of the topography. We compared strike and dip of foliation and aspect and slope of topography and recognized the typical fracture pattern, strike and dip of joint, that coincided with shear fracture system. The result tells us that foliation of gneiss has geometrical relation to joint or fault that leading landslide. GIS was used to analyze vast data efficiently and the result can be used to assess the landslide susceptibility as important factor.

• Steel and Composite Structures
• /
• v.9 no.3
• /
• pp.209-221
• /
• 2009

Heating correction, through heating and flattening a structure with a pressing machine, is the in-situ method used to repair buckled steel structures. The primary purpose of this investigation is to develop an FEM model which can predict the mechanical response of heat-corrected plates accurately. Our model clarifies several unsolved problems. In previous research, the location of the imperfection was limited to the center of the specimen although the mechanical behavior is strongly affected by the location of the imperfection. Our research clarifies the relationship between the location of the imperfection and the mechanical behavior. In addition, we propose further reinforcement methods and validate their effectiveness. Our research concludes that the strength of a buckled specimen can be recovered by heating correction and the use of an adequate stiffener.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.272-273
• /
• 2015

This paper analyze scenario of feeder wire fault that occurs in the AC feeding system considering train position. The fault location of AC feeding system is calculated by measuring impedance. However, in this way, estimation error can be occurred because of tie connection, boosting current, etc. Therefore, it's hard to find fault location, so that it is required to detailed circuit analysis according to fault location. We analyze the short circuit impedance values with respect to feeder wire fault according to a train position. In this paper, PSCAD is used for modeling and analysis of AC railway feeding system.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1160-1161
• /
• 2015

In order to analyze and diagnosis on Location of partial discharge in underground distribution cable, partial discharges were measured using eletromagnetic sensors, oscilloscope, PDMS system at on-site underground multi-circuit switches. Throughout the analysis using 3-phase simultaneous pulse analysis and pulse polarity comparison of circuits, it is possible to separate noises and PD pulses and to find out the location of the pulses.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.361-363
• /
• 2003

To reduce the effect of fault on underground power cable, we need exact and fast fault location detection technique. In this thesis, we describe on filter design technique that can be applied to on-line fault defection technique. To design fitter for fault location defection on Power cable, we should analysis fault signal. So we designed test bed for fault generation and measured fault signals for analysis. Through the analysis of signals, we found that ANC filter can be applied to separate fault signals and we designed a ANC filter. We tested on the designed filter through computer simulation, and we describe its results in this paper.

• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2013

This paper presents an approach for detecting and measuring human skin pigmentation. In the proposed scheme, we extract a skin area by a Gaussian skin color model that is estimated from the statistical analysis of training images and remove tiny noises through the morphology processing. A skin area is decomposed into two components of hemoglobin and melanin by an independent component analysis (ICA) algorithm. Then, we calculate the intensities of hemoglobin and melanin by using the location histogram and determine the existence of skin pigmentation according to the global and local distribution of two intensities. Furthermore, we measure the area and density of the detected skin pigmentation. Experimental results verified that our scheme can both detect the skin pigmentation and measure the quantity of that and also our scheme takes less time because of the location histogram.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.412-414
• /
• 2004

In this paper, a novel algorithm of underground cable fault location based on the analysis of distributed parameter circuit is proposed. The proposed method makes voltage and current equations about core and sheath, and then establishes a function of the fault distance according to the analysis of fault conditions. Finally gets the solution of this function through Newton-Raphson iteration method. The effectiveness of proposed algorithm has been verified by Matlab program, and the cable parameters such as impedance and admittance are from EMTP simulation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.4
• /
• pp.59-66
• /
• 2015

The rapid development of information communication technology(ICT) is born opportunities of business venturing and many items of start-up. On the smart media era, there are a lot of location based services. Thus we researched to find which factors impact location based constructs on smartphone environment in this study. We have conducted a preference analysis of the influencing factors for location based constructs for our study. In first steps, based constructs that were already known by empirical studies were categorized information, entertainment, safe&emergency, navigation&tracking and advertising&commerce. In second steps, the preference relationship among the categorized constructs were analyzed using AHP(analytic hierarchy process) technique. Participants of this study were 106 students H university in Daejeon-city during 2014. 10. 11 to 2014. 10. 25. The result of the analysis might be summarized that the chatting(0.170) has the highest preference among the above constructs. Based on these findings, several theoretical and practical implications were suggested and discussed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.99-105
• /
• 2010

Photovoltaic system is the core one among the new and renewable energy of the low Carbon and green growth. Recently, the necessity developing PV is emerging since its of less green hose gas emissions. However, a survey or research on the PV system has been hardly performed. It's not easy to find a appropriate location in consideration of environment. These circumstances encourages a systematic approach for the PV system development. The purpose of this study is to propose a methodology of the location analysis for developing PV system. With this, constraint and location criteria with weights of Analytic Hierarchy Process are established and quantification method of each factor is presented. The location analysis of PV system using the GIS were generalized and the results of analysis for redundant topographic features were presented as 3 criteria of the suitability rank.