• Design & Manufacturing
• /
• v.2 no.6
• /
• pp.49-55
• /
• 2008

Double-injection molding can inject two different materials or two colors in the same mold and process. If this injection process use, product has ability because the base part maintain strength and specified part can inject soft-material. It makes the cost down by single operation automatically for saving wages. In this paper, we designed double-injection mold for automobile remote control to inject secondary using this part as insert after inject external appearance of product. CAE analysis was progressed gate location and runner size as variable and analysis result is reflected in mold design process. As a result, it could solved badness that is generated at the conventional mold. Additionally, cost is downed by reducing loss of runner as well as could omit painting process because surface of finished product is improved through new mold.

• Korean Institute of Interior Design Journal
• /
• v.15 no.5 s.58
• /
• pp.183-192
• /
• 2006

This study analyzes the characteristics of special configuration for wayfinding in general hospitals. To that end, the study categorizes four different hospitals, according to the type of their wayfinding systems. It aims at utilizing the result of the analysis for wayfinding system in general hospitals by applying three elements of analysis methods', perpetual access, depth, and intelligibility. The study result shows as follows: First, there is no difference in special hierarchy when hospitals are analyzed and divided by halls and streets. It means that outpatient departments are located by spatial function and characteristics rather than form of spatial configuration. Second, we found that fewer direction changes are conducive to easier circulation in terms of wayfinding, when we analyzed spatial depth from the main entrances to the outpatient departments. Third, regarding intelligibility, intelligibility of Chungang University Hospital ranked highest. Kunkook University Hospital, Dongkook University Hospital and Seoul National University Hospital ranked 2nd, 3rd, and 4th respectively. It means that difficulty level of wayfinding is not decided by the characteristics of special configuration such as hospital hall and hospital streets but depends on location planning. The difficulty level of wayfinding mainly relies on location planning.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.8
• /
• pp.995-1000
• /
• 2000

Objective : The authors reviewed 280 cases with intracranial arteriovenous malformations(AVMs) to identify risk factors of hemorrhage. Patients and Methods : From 1983 to 1997, a total 280 patients with AVMs were treated. Among them, 64% had a history of hemorrhage. Angiograms were retrospectively analyzed with particular attention to the size of the AVM, venous drainage, the location of the AVM and presence of associated aneurysm or varix. These characteristics were statistically analysed in relation to occurrence of hemorrhage. Results : A single variate analysis demonstrated that small size(p=0.0003), deep venous drainage(p=0.025) and periventricular location(p<0.0001) had a strong positive correlation. Associated aneurysms and varices were not found as hemorrhagic risk factors. A multivariate analysis revealed that the size of the AVM was most significant hemorrhagic factor(p=0.0003) followed by deep venous drainage(p=0.025). AVMs with small size and deep venous drainage bled more frequently regardless of their locations. Conclusion : These data would be useful in identifying patients at higher risk for developing hemorrhage of intracranial AVMs.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.34-39
• /
• 2014

This paper is aimed to prevent danger of electrical fire at cattle barn to detect resistive and capacitive leakage current component for wiring type and length. In order to analysis for electric leakage component for cattle barn sizes and normal buildings, this paper was studied field state investigation which are at cattle barn companies(10 companies) in Cheong-won location and normal buildings at Nam-bu market in Jeon-ju location. Market to deduce the problems of electric leakage component is analyzed. The resistive and capacitive leakage current component for wiring type and length is analyzed at Beon-young cattle barn. Results show that electric leakage component suggested in this paper are valuable and usable to electrical fire in leakage current based on environment factor, which will prevent severe damage to human beings and properties and reduce the electrical fires in cattle barn. It is acceptable for electrical equipment use in an cattle barn.

• Journal of Fashion Business
• /
• v.11 no.1
• /
• pp.97-107
• /
• 2007

The purpose of this study was to examine the relationship structure in discount store focusing on age. Subjects for this study were 360 customers who had purchased fashion products in discount stores. For date analysis, $x^2$-test and regression analysis were used. As the result, when comparing groups by the age, women in their 20s, 30s and 40s had 'relationship maintenance intention' through satisfaction, trust and commitment. In the case of women in their 20s group, the information, reputation, product salesperson and price variables had the effects on satisfaction. The information, location, salesperson variable had direct effect on relationship maintenance. In the case of women in their 30s group, the benefits, information, reputation and price variables had the effects on satisfaction. And the information, salesperson variable had direct effect on relationship maintenance. In the case of women in their 40s group, the information, location and price variables had the effects on satisfaction. The reputation variable had direct effect on relationship maintenance. Based on these results, fashion marketing strategies of discount store would be suggested.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.449-461
• /
• 2017

The uncertain existence and insufficient information of underground structures, such as pipe lines and cable tunnels, is causing many problems related to route plan, design, construction of new underground structures. The theoretical equations that is able to predict the location, size, and direction of underground structures through electric field analysis are suggested at the previous study (Ryu., 2015). Three field tests were performed for predicting the location, size, and direction of underground structures and the existence and size of sink-hole. Prediction results were reflected at the design and follow-up measures were performed.

• Structural Engineering and Mechanics
• /
• v.1 no.1
• /
• pp.1-16
• /
• 1993

The behavior of shear-wall dominant, low-rise, multistory reinforced concrete building structures is investigated. Because there are no beams or columns and the slab and wall thicknesses are approximately equal, available codes give little information relative to design for gravity and lateral loads. Items which effect the analysis of shear-wall dominant building structures, i.e., material nonlinearity including rotating crack capability, 3-D behavior, slab-wall interaction, floor flexibilities, stress concentrations around openings, the location and the amount of main discrete reinforcement are investigated. For this purpose 2 and 5 story building structures are modelled. To see the importance of 3-D modelling, the same structures are modelled by both 2-D and 3-D models. Loads are applied first the vertical then lateral loads which are static equivalent earthquake loads. The 3-D models of the structures are loaded in both in the longitudinal and transverse directions. A nonlinear isoparametric plate element with arbitrarily places edge nodes is adapted in order to consider the amount and location of the main reinforcement. Finally the importance of 3-D effects including the T-C coupling between walls are indicated.

• Structural Engineering and Mechanics
• /
• v.20 no.3
• /
• pp.313-334
• /
• 2005

The paper presents a new approach for the analysis of slope stability that is based on the numerical solution of a differential equation, which describes the thrust force distribution within the potential sliding mass. It is based on the evaluation of the thrust force value at the endpoint of the slip line. A coupled approximation of the slip and thrust lines is applied. The model is based on subdivision of the sliding mass into slices that are normal to the slip line and the equilibrium differential equation is obtained as the slice width approaches zero. Opposed to common iterative limit equilibrium procedures the present method is straightforward and gives an estimate of slope stability at the value of the safety factor prescribed in advance by standard requirements. Considering the location of the thrust line within the soil mass above the trial slip line eliminates the possible development of a tensile thrust force in the stable and critical states of the slope. The location of the upper boundary point of the thrust line is determined by the equilibrium of the upper triangular slice. The method can be applied to any smooth shape of a slip line, i.e., to a slip line without break points. An approximation of the slip and thrust lines by quadratic parabolas is used in the numerical examples for a series of slopes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.243-253
• /
• 1999

The dual reciprocity boundary element method (DRBEM) is used to solve the Graetz problem of laminar flow inside circular duct. In this method the domain integral tenn of boundary integral equation resulting from source term of governing equation is transformed into equivalent boundary-only integrals by using the radial basis interpolation function, and therefore complicate domain discretization procedure Is completely removed. Velocity profile is obtained by solving the momentum equation first and then, using this velocities as Input data, energy equation Is solved to get the temperature profile by advancing from duct entrance through the axial direction marching scheme. DRBEM solution is tested for the uniform temperature and heat flux boundary condition cases. Local Nusselt number, mixed mean temperature and temperature profile inside duct at each dimensionless axial location are obtained and compared with exact solutions for the accuracy test Solutions arc in good agreement at the entry region as well as fully developed region of circular duct, and their accuracy are verified from error analysis.

• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.93-101
• /
• 2007

The purpose of this study is to evaluate the effect of three different oblique mechanical loading to occlusal surfaces of posterior implant partial dentures on the stress distributions in surrounding bone, using 3-dimensional finite element method. A 3-dimensional finite element model of a posterior implant partial dentures composed of three unit implants, simplified 3 gold alloy crown and supporting bone was developed according to the design of AVANA self tapping implant for this study. Three kinds of surface distributed oblique loads(300 N) are applied to following occlusal surfaces in the three crowns; 1) All occlusal surfaces in the three crown(load of 300 N was shared to three crown), 2) Occlusal surface of centered crown (load of 300 N was applied to a centered crown), 3) Occlusal surface of proximal crown(load of 300 N was applied to a distal proximal crown). In the results, 141 MPa of maximum von Mises stress was calculated at third loading condition and 98 MPa of minimum von Mises stress was calculated at first loading condition. From the results, location and type of occlusive loading conditions are important for the safety of supporting bone.