• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.150-154
• /
• 2012

A flow induced mechanical vibration and acoustic resonance should be considered at design stage because they are mainly occurred in the tube bank of boiler. Acoustic resonance is occurred when the vortex shedding frequency of tube bank coincides with the acoustic natural frequency of the cavity. Effective solution to avoid acoustic resonance is installing acoustic baffles in the tube banks parallelly inside of the flow cavity. Thus, location and number of acoustic baffles should be exactly calculated to eliminate the acoustic resonance. This paper presents case study of acoustic resonance due to inappropriate number and location of acoustic baffles. Measured frequency and mode in the study is verified by FEM acoustic modal analysis. The number and location of acoustic baffles to avoid acoustic resonance are calculated by using FEM acoustic modal analysis.

• Journal of Korea Trade
• /
• 제27권5호
• /
• pp.23-40
• /
• 2023

Purpose - This study aims to present the changes and directions in the automotive supply chain in the face of changes in the global supply chain caused by external factors and the integration of industries resulting from internal factors. Assuming FDI in the Korean automotive industry in the US, this study analyzed the influential factors over the long term and derived the optimal location. Design/methodology - For this analysis, the characteristics and current status of the automotive industry are presented. Additionally, the study emphasizes the necessity and direction of change. The factors influencing Korea-US FDI in the automotive industry and the electric vehicle industry were analyzed through panel analysis. The optimal location from the perspective of distribution costs was selected using linear programming under the assumption that local demand will be replaced by local production in the future. Findings - This study found that the electric vehicle supply chain will change with the characteristics of the electric and electronic industries rather than with the traditional automotive industry. Additionally, in deriving the optimal location, the study emphasized the proximity to the consumption market. Originality/value - The analysis method and conclusions of this study not only present the influential factors and direction of FDI in the automotive industry but also can be applied to other industries. Moreover, the study provides practical and policy implications for industries and governments considering FDI in the US.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.207-215
• /
• 1997

This paper deals with a comparison between Taguchi's accumulation analysis method and Nair test on the ordered categorical data from an industrial experiment for quality improvement. a result of Taguchi's accumulation analysis method is shown to have reasonable power for detecting location effects, while Nair test identifies the location and dispersion effects separately, Accordingly, Taguchi's accumulation analysis needs to develop methods for detecting dispersion effects as well as location effects. In addition this paper rewmmends models for analyzing ordered categorical data, for examples, the cumulative legit model, mean response model etc Successively simple, reasonable methods should be introduced more likely to be used by the practitioners.

• 무역학회지
• /
• 제47권4호
• /
• pp.293-309
• /
• 2022

The purpose of this paper is to analyze the import and export volume of Jeollabuk-do to establish a plan to activiation Saemangeum New Port. To this end, this study utilized the HHI(Herfindahl-Hirschman Index), LQ(Location Quotient) analysis using the annual data set from the Korea Trade Statistics Promotion Institution between 2015 to 2020. As a result, it has been confirmed that the degree of export volume concentration (HHI (Herfindahl-Hirschman Index)) in Jeollabuk-do has been increasing over the past 5 years. According to results of LQ(Location Quotient) analysis, Brazil had the highest index in the case of exporting countries, and Meat, edible meat offal (HS 2) had the highest index in the case of export items. This paper is meaningful in analyzing the export structure using import and export volumes and proposing a plan to improve the competitiveness of Saemangeum New Port.

• Management Science and Financial Engineering
• /
• 제14권2호
• /
• pp.1-12
• /
• 2008

This study explores several donor location strategies and discusses experiment results, which contributes to the saving of time and effort required in designing data fusion processes. In particular, three concepts are introduced. The Mahalanobis distance is applied to locate the nearest neighbors more effectively; which incorporates the covariance structure of attributes. The ideal point helps reduce the dimensionality problem that arises in conjoint-type experiments. The correspondence analysis is used to derive the coordinates from non-metric attributes. The Monte Carlo simulation results show that the proposed donor location strategies provide better fusion performance, compared to the currently-in-use methods.

• 한국연소학회지
• /
• 제18권1호
• /
• pp.1-6
• /
• 2013

Authors' previous works on thermoacoustic(TA) model development showed good results in predicting combustion instability characteristics in a gas turbine combustor. However, they also suggested there were some limitations in growth rate estimation, which might be related with over-simplification of flame structure. As a first trial for improving the model accuracy, the current paper introduces the modified TA model considering the actual flame location in the combustor. The combustor is divided into the unburned and the burned area before and after the flame location, and then acoustic equations are re-organized. The modified TA model results show a better accuracy in predicting the growth rate of instabilities comparing with the previous results. However, obtained results still overestimate the conditions where the combustor goes unstable. Further researches considering heat release distribution through flames are required.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.61-64
• /
• 2005

The purpose of this paper is to take a closer look at an area having shorted emergence facilities and to determine optional candidate sites instead of vulnerable area by using GIS spatial analysis. Newly determined new candidate is performed by concerning spatial efficiency and spatial equity for a public service. It was determined through using the analyzing of the physical accessibility measure, the Location-Allocation, sort of classic model in spatial statistics and general network analysis. The area of this research has been used in administrative boundary of Young-Dong in Gangneung including 13 emergency, medical hospitals, 46 fire-stations and sub-fire stations. In general terms, what all this show is that the way we are approached for geographical view from using GIS spatial analyzing technique of determined location and allocation problem by the social, economical, political factor and simple administrative discrimination at the meantime. At the same time, with problem occurred in the space it is possible to make an Effective proposal or means, policy, decision for new candidate location-allocation suggesting optimum model.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권8호
• /
• pp.369-373
• /
• 2000

High impedance fault(HIF) is defined as a fault that the general overcurrent relay can not detect or interrupt. Especially when HIF occurs in residential areas, energized high voltage conductor results in fire hazard, equipment damage or personal threat. This paper proposes a fault location estimation algorithm for high impedance fault using wavelet transform. The algorithm is based on the wavelet analysis of the fault voltage and current signals. The performance of the proposed algorithm is tested on a typical 154kV korean transmission line system under various fault conditions. From the tests presented in this paper it can be concluded that a fault location estimation algorithm using wavelet transform can precisely calculate the fault point for HIF.

• 상하수도학회지
• /
• 제29권6호
• /
• pp.617-623
• /
• 2015

In this study, determination methods of monitoring location in water distribution system were suggested and applied to real test bed. Small block of Gwangtan water distribution system is consisted of 582 pipes, 564 junctions, 1 reservoir, and 1 pump station. Small block of Ho Chi Minh water distribution system is consisted of 162 pipes, 148 junctions, and 1 reservoir. Two small block water distribution systems were analyzed by pressure contribution analysis method to determine the optimum monitoring locations. The pressure change was estimated at each junctions by the additional demand at a junction. From the results, the optimum monitoring location can be determined by rank of pressure contribution index at each junctions due to demand change at a junction.

• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.127-131
• /
• 2007

Purpose: To measure the differences of the splint pin angulation and the position of the planned implant site after conventional tomographic analysis. Materials and Methods: The angulation and the location of the metal splint pin retained in acrylic stent were compared with the corrected angulation and the location of the implant fixture on the 331 tomographic images. Results: The stent pins were located buccal in 40%, lingual in 10% to the corrected implant site after analysis of the conventional tomographic image. The angle and the location of the maxillary splint pin were mainly directed buccal on incisor and canine regions. The angle and the location of the splint pins in premolar and molar regions needed less corrections in both maxilla and mandible. Conclusions: This study demonstrated that the use of tomographs was essential for successful dental implant planning.