• Smart Structures and Systems
• /
• v.23 no.1
• /
• pp.61-69
• /
• 2019

Offshore structures are generally exposed to harsh environments such as strong tidal currents and wind loadings. Monitoring the structural soundness and integrity of offshore structures is crucial to prevent catastrophic collapses and to prolong their lifetime; however, it is intrinsically challenging because of the difficulties in accessing the critical structural members that are located under water for installing and repairing sensors and data acquisition systems. Virtual sensing technologies have the potential to alleviate such difficulties by estimating the unmeasured structural responses at the desired locations using other measured responses. Despite the usefulness of virtual sensing, its performance and applicability to the structural health monitoring of offshore structures have not been fully studied to date. This study investigates the use of virtual sensing of offshore structures. A Kalman filter based virtual sensing algorithm is developed to estimate responses at the location of interest. Further, this algorithm performs a multi-sensor data fusion to improve the estimation accuracy under non-stationary tidal loading. Numerical analysis and laboratory experiments are conducted to verify the performance of the virtual sensing strategy using a bottom-fixed offshore structural model. Numerical and experimental results show that the unmeasured responses can be reasonably recovered from the measured responses.

• Journal of Distribution Science
• /
• v.19 no.2
• /
• pp.15-24
• /
• 2021

Purpose: The research is to find out the perception of consumers for the convenience store (c - store) image in an emerging market, with a sample from Ho Chi Minh City. Research design, data, and methodology: Data were collected using a 24 - item structured questionnaire into six factors, namely: store atmospheric, merchandise, supplementary service, customer convenience, sales personnel, promotion. Five hundred consumers shopped at the different c - stores were collected for a multidimensional scaling technique that creates a perceptual map illustrating of c - store image. Results: The results point out that consumers' perception of a different c - store is different. The trend of c- stores are focusing on the dimensions of the function aspect. The customers also put their attention on the psychological dimension, which, in this case, is customer convenience with a sharp point. Almost all stores are bad on store atmospheric in customer- based. Conclusions: The modern retail store chains need to focus on elements to create a store image positioning and improve the perceptions of the consumers towards the store. Besides, customers not only visit the stores, not due to its convenient location, mass media or shopping experience, but also a strong identity for the store's brand image.

• Steel and Composite Structures
• /
• v.42 no.2
• /
• pp.151-159
• /
• 2022

This study discusses a hypothetical method for tracking the propagation damage of Carbon Reinforced Fiber Plastic (CRFP) components underneath vibration fatigue. The High Cycle Fatigue (HCF) behavior of composite materials was generally not as severe as this of admixture alloys. Each fissure initiation in metal alloys may quickly lead to the opposite. The HCF behavior of composite materials is usually an extended state of continuous degradation between resin and fibers. The increase is that any layer-to-layer contact conditions during delamination opening will cause a dynamic complex response, which may be non-linear and dependent on temperature. Usually resulted from major deformations, it could be properly surveyed by a non-contact investigation system. Here, this article discusses the scanning laser application of that vibrometer to track the propagation damage of CRFP components underneath fatigue vibration loading. Thus, the study purpose is to demonstrate that the investigation method can implement systematically a series of hypothetical means and dynamic characteristics. The application of the relaxation method based on numerical simulation in the Artificial Intelligence (AI) Evolved Bat (EB) strategy to reduce the dynamic response is proved by numerical simulation. Thermal imaging cameras are also measurement parts of the chain and provide information in qualitative about the temperature location of the evolution and hot spots of damage.

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.4
• /
• pp.499-513
• /
• 2022

This study targets the rechargeable battery industry, which has been rapidly growing recently. The rechargeable battery industry is closely related to the electric vehicle industry. However, other factors also influence it. Currently, rechargeable battery companies show a pattern of restructuring production space by various means. To determine the causes of these production spaces, the factors affecting regional and national scales were thoroughly examined. As a result, the location factors for rechargeable battery-related companies are determined by cooperative relationships with assembled car companies, government policy regulations, and the stability of supply of key materials. And a spatial strategy was implemented to make the most of these circumstances.

• Tribology and Lubricants
• /
• v.39 no.3
• /
• pp.102-110
• /
• 2023

This study aims to quantify the variation in the performance of a tilting pad journal bearing (TPJB) owing to the elastic deformation of its pad. To this end, we first defined a parameter, "elastic preload", and predicted the changes in the performance of the TPJB, as a function of the preload amount. We used the iso-viscosity Reynolds equation, which ignores the temperature rise due to viscous shear in thin films, and the resultant thermal deformation of the bearing structure. We employed a three-dimensional finite element model to predict the elastic deformation of the bearing pad, and a transient analysis, to converge to a static equilibrium condition of the flexible pads and journal. Conducting a modal coordinate transformation helped us avoid heavy computational issues arising from a mesh refinement in the three-dimensional finite element pad model. Moreover, we adopted the Hertzian contact model to predict the elastic deformation at the pivot location. With the aforementioned overall strategy, we predicted the performance changes owing to the elastic deformation of the pad under varying load conditions. From the results, we observed an increase in the preload due to the pad elastic deformation.

• Archives of Craniofacial Surgery
• /
• v.25 no.3
• /
• pp.150-154
• /
• 2024

This case report describes a rare occurrence of pyogenic granuloma (PG) in the hard palate deviating from its typical gingival location that led to the formation of an alveolar cleft. The aggressive growth pattern of the lesion, with atypical progression from a pedunculated nodule to an alveolar cleft, raised concern. The diagnosis was based on magnetic resonance imaging and computed tomography findings, which revealed a tadpole-shaped lesion originating from the midline hard palate. The differential diagnosis included a minor salivary gland tumor. Surgical excision was performed under general anesthesia and resulted in a mucosal defect without nasolabial fistula formation or bone exposure. The palatal defect was packed with oxidized regenerated cellulose and closed with Vicryl Rapide sutures, both of which contributed to the patient's successful outcomes. Our comprehensive approach, extending across the stages of surgical planning, execution, and postoperative care, demonstrated the advantages of a multidisciplinary strategy for the accurate diagnosis and effective treatment of palatal PGs. This report makes a meaningful contribution to the existing literature on common oral lesions by emphasizing the importance of a broad differential diagnosis and a systematic approach to oral pathologies. It also raises clinical awareness of PGs with atypical presentations and the diagnostic challenge that they pose.

• Steel and Composite Structures
• /
• v.51 no.4
• /
• pp.363-375
• /
• 2024

Within the optimization field, addressing the intricate posed by fluidic pressure loads on functionally graded structures with frequency-related designs is a kind of complex design challenges. This paper thus introduces an innovative density-based topology optimization strategy for frequency-constraint functionally graded structures incorporating Darcy's law and a drainage term. It ensures consistent treatment of design-dependent fluidic pressure loads to frequency-related structures that dynamically adjust their direction and location throughout the design evolution. The porosity of each finite element, coupled with its drainage term, is intricately linked to its density variable through a Heaviside function, ensuring a seamless transition between solid and void phases. A design-specific pressure field is established by employing Darcy's law, and the associated partial differential equation is solved using finite element analysis. Subsequently, this pressure field is utilized to ascertain consistent nodal loads, enabling an efficient evaluation of load sensitivities through the adjoint-variable method. Moreover, this novel approach incorporates load-dependent structures, frequency constraints, functionally graded material models, and polygonal meshes, expanding its applicability and flexibility to a broader range of engineering scenarios. The proposed methodology's effectiveness and robustness are demonstrated through numerical examples, including fluidic pressure-loaded frequency-constraint structures undergoing small deformations, where compliance is minimized for structures optimized within specified resource constraints.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1293-1303
• /
• 2006

This paper represents a comparison the difference between existence and nonexistence of soundproof trees for road traffic noise. Also we suggested that the simple equation has been derived using a single regression analysis for predicting levels of $Leq_{th}$ at a given distance from a road in terms of the flow rate, the mean speed of the traffic, and the percentage of the type vehicles in the existence and nonexistence of soundproof trees. We classified a vehicle into four and analyzed contribution rate to traffic volume. As a result, the order showed as followed: light vehicle>medium vehicle>heavy vehicle>motorcycle. However, the results of analyzing contribution rate with between traffic volume and traffic noise by the each type showed as followed; Motorcycle>Light vehicle>Medium vehicle>Heavy vehicle. This study showed that the most a lof of traffic volumes of the three vehicles(light vehicle, medium vehicle and motorcycle) and heavy vehicle were existed in 67 km/h and 61 km/h of car speed, respectively. The total traffic noise to the mean car speed decreased because of the inflow a lot of traffic volumes between 2016 and 2388 in the range of 67 km/h of light vehicle speed, in traffic composition of 4.75% heavy vehicles, and 1.11% motorcycle. the final result for this study showed that statistical paired t-test for between existence and nonexistence of soundproof trees was significant(p<0.05) and the difference between daytime and night in the location of the nonexistence of plant communities with the independent sample T-test was significant(p<0.05). However, the independent sample T-test for analyzing the variance of traffic noise between daytime and night was not significant(p>0.05).

• Journal of Chest Surgery
• /
• v.37 no.5
• /
• pp.438-443
• /
• 2004

Background : The treatment strategy for urinary spontaneous pneumothorax has progressively changed with the introduction of video-assisted thoracic surgery (VATS). Recently, we modified the strategy of primary spontaneous pneumothorax. If the patient had mild dyspnea and the lung was minimally collapsed, 2 mm thoracoscopic examination was performed. If no blob or bullae was inspected, the intrathoracic air was evacuated through the 2 mm thoracoscopic troca without closed thoracostomy, and if the blob and bullae was noted, the 10 mm thoracoscopic bullecotomy was carried out immediately and also application of fibrin glue was substituted for pleural abrasion. We compared the clinical outcomes of modified treatment strategy with conventional strategy in primary spontaneous pneumothorax. Material and Method: Patients were divided into four groups. Group I (n=21) underwent 2 mm thoracoscopic examination. Group II (n=68) underwent closed thoracostomy. Group III (n=56) underwent VATS and application of fibrin glue. Group IV (n=87) underwent VATS and pleural abrasion. The duration of chest tube drainage, the duration of hospitalization and the recurrence rate were compared between group I and group II and between group III and group IV. Result: Mean age, sex, location of pneumothorax were not different in all groups. In group I, the blob or bullae were existed in 12 patients, In remaining 9 patients, the bleb or bullae was not inspected. The mean duration of hospitalization in 9 patients were 2.4 $\pm$1.0 day and in group II were 3.9$\pm$2.1 day (p=0.014). There was 1 case of recurrence among the 9 patients in group I and 26 recurrences in group II (p=0.149). The mean duration of chest tube drainage were not difference in group III and IV (group III: 2.8$\pm$1.8 day, group IV: 3.0$\pm$2.5 day). The mean duration of hospitalization was shorter in group III than group IV (group III: 5,6$\pm$2.7 day, group IV: 1.3$\pm$3.3 day)(p=0.002). There was no recurrence in group III and 7 recurrences in group IV (p=0.043). Conclusion: Our modified treatment strategy of primary spontaneous peumothorax was effective in short hospital course and low recurrence rate.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.2
• /
• pp.189-222
• /
• 2008

This study developed a model to empirically investigate the effects of market orientation and relationship orientation with suppliers on business performance and examine the moderating effects of entrepreneur's characteristics (working tenure) and clinic's location. The data was collected from 200 animal clinics which belong to Korean Animal Hospital Association (KAHA)'s national conference in April, 2007. Descriptive statistic, factor analysis, reliability analysis, and regression analysis were conducted to analyze the data using SPSS/PC+ 12.0. The findings are as follows. First, the market orientation of animal clinics influences significantly both financial and non-financial performance. When the moderating effect of entrepreneur's working tenure is considered, market orientation has significant effect on animal clinic's financial and non-financial performance. However, when the moderating effect of animal clinic's location is considered, market orientation has not significant effect on animal clinic's financial and non-financial performance. Second, animal clinic's relationship orientation with suppliers mostly affects the financial and non-financial performance significantly. When entrepreneur's working tenure in the clinic is longer (above 4 years group), relationship orientation with suppliers significantly affects both financial and non-financial performance. Meanwhile, when the entrepreneur's working tenure in the clinic is shorter (less than 3 years group), relationship orientation with suppliers doesn't affect clinic's financial performance but affect non-financial performance partially. In other words, when entrepreneur's working tenure is shorter (less than 3 years group), market orientation more influences on clinic's financial and non-financial performance while relationship orientation with suppliers does less. It is thought that their relation with suppliers and relationship orientation activities with suppliers are less strongly established and maintained yet. So, they primarily focus on market orientation strategy when entrepreneur's working tenure is shorter. Third, when animal clinics are located in non-metropolitan area, relationship orientation with suppliers significantly affects financial and non-financial performance. However, when animal clinics are located in metropolitan area, it doesn't affect financial and non-financial performance either. It is thought that animal clinics which are located in non-metropolitan area need stronger relationship with suppliers and need support more from them as most of suppliers actively work in metropolitan area not in the non-metropolitan area and animal clinics in metropolitan area can easily get better market information than animal clinics in non-metropolitan area. Lastly, while the effect of the market orientation significantly influences animal clinic's business performance continuously, the effect of the relationship orientation differently influences business performance as it is moderated by entrepreneur's working tenure and animal clinic's location. So, relationship orientation with suppliers can be selectively applied to improve the clinic's financial and no-financial performance. In summary, both of animal clinic's marketing orientation and animal clinic's relationship orientation with suppliers positively influence their business performance. However, entrepreneur's working tenure and animal clinic location moderate the relationship between market orientation and relationship orientation and their business performance differently. This study is quite meaningful to empirically investigate the effects of both of market orientation and relationship orientation with suppliers on business performance and examine the moderating effects of entrepreneur's characteristics (working tenure) and clinic's location. And, as this kind of study has been very few in the context of animal clinic industry, it helps practically understand the effects of market orientation and relationship orientation with suppliers on the financial and non-financial performance in animal clinic industry. Furthermore, as the market conditions in animal clinic industry have been in difficulty for a few years, this study can help improve animal clinic's financial and non-financial business performance together with their suppliers as business partners. Lastly, this study can help find mid-term and long-term cooperation between animal clinics and their suppliers. This study has some limitations. So, care should be taken when generalizing the results of the study. First, our samples were collected from only the animal clinics industry. However, a comparison of the results presented here with those form other marketing contexts (e.g., general hospitals) would be worthwhile. Future comparative research will enhance the generality of our contingency theory cross industry context. Second, this study found that market orientation and relationship orientation affect business performance. However, there may be other antecedents, such as internal market orientation and relationship orientation with customers. Also, this research did not consider other moderators, such as overall market conditions, competitive situations, and power/conflict between suppliers and buyers in the relationship between market and relationship orientation and business performance.