• Journal of the Korean Geographical Society
• /
• v.48 no.2
• /
• pp.259-271
• /
• 2013

This paper addresses the efficient facility placements to adopt a super WiFi network, taking significant considerations as the next generation 'information highway'. Since the super WiFi has a wider geographic coverage by utilizing the white spaces of TV broadcasting which are empty and available frequencies for the wireless communications, it would play an important role in releasing digital divide of the internet access for low populated or mountainous areas. The purpose of this paper is to explore systematic and efficient spatial plans for the super WiFi. For doing this, we applied optimal location covering models to Gurye-gun, Jeonlanamdo. From the application, we presented optimal locations for super WiFi facilities and significant analytical results, such as the tradeoff between the number of facilities and coverage and marginal coverage for establishing super WiFi network. The results of this research would be usefully utilized for decision makers who wish to adopt a super WiFi, to extend wireless networks in a city or build a regional infrastructure of wireless facilities.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.168-182
• /
• 2014

Several Sungsi Gardens were built up in Old West Village during the period of the Joseon Dynasty. Most of them were painted as True-View landscape painting. This study aims at examining original locations of representative gardens of the Old West Village by empirical investigation of related True-View landscape paintings. It seeks to demonstrate the garden landscape in True-View landscape painting by utilizing ArcGIS, 3D topographic modeling to observe geographical locations and landscape more realistically. After forming 3D topographic modeling of estimated locations of the gardens, location of objects at composition of 3D modeling similar to True-View landscape painting was found by shifting viewpoints. And by overlapping the cadastral map on the modeling, we could verify the current lot number of the garden sites. The interpretation of processes and results are as follows. In the early stage, Chungpunggye garden was built at the very end of Mt. InWang valley. The site is hidden from the outside, and appeared as 'Enclosed Landscape'. In the middle stage, Chunghuigak garden was built between Okryu-dong valley and the surrounding ridge. It appeared as 'Semi-Opened Landscape'. In the late stage, Seowon garden was built at the highest level of the ridge among the research areas. It appeared as 'Prospective Landscape'. In the last period, Songsukwon garden, was built at a point of contact of the ridge end and surrounding residential area. So it appeared as 'Opened Landscape' to the town. In other words, the location, landscape and social function of the gardens in Old West Village had been gradually opened in Joseon Dynasty.

• Journal of KIBIM
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2016

This paper provides a method for generating flight path of Unmanned Aerial Vehicle (UAV) that is intended to be used in visual inspection of dome-type nuclear containment building. The method basically employs 3-D model to extract accurate location coordinates. Two basic route patterns that provide guide lines in defining moving locations were defined for each side wall and dome section of the containment. The route patterns support sequential capturing of images as well. In addition, several simple equations and an algorithm for calculation of the moving location on the route were developed on the basis of 3-D geometric characteristics of the containment building. A prototype computer program has been implemented to validate the proposed method, and a case study shows the method can visualize covering area in 3-D model as well.

• Communications for Statistical Applications and Methods
• /
• v.22 no.6
• /
• pp.543-556
• /
• 2015

We present a survey of contributions that defined the nature and extent of robust statistics for the last 50 years. From the pioneering work of Tukey, Huber, and Hampel that focused on robust location parameter estimation, we presented various generalizations of these estimation procedures that cover a wide variety of models and data analysis methods. Among these extensions, we present linear models, clustered and dependent observations, times series data, binary and discrete data, models for spatial data, nonparametric methods, and forward search methods for outliers. We also present the current interest in robust statistics and conclude with suggestions on the possible future direction of this area for statistical science.

• Structural Engineering and Mechanics
• /
• v.66 no.4
• /
• pp.439-444
• /
• 2018

This paper presents a numerical study on the behavior of continuous hollow steel beam strengthened using carbon fiber reinforced polymers (CFRP). Most previous studies on the CFRP strengthening of steel beams have been carried out on the steel beams with simple boundary conditions. No independent study, to the researcher's knowledge, has studied on the CFRP strengthening of square hollow section (SHS) continuous steel beam. However, this study explored the effect of the use of adhesively bonded CFRP flexible sheets on the behavior of the continuous SHS steel beams. Finite Element Method (FEM) has been employed for modeling. Eleven specimens, ten of which were strengthened using CFRP sheets, were analyzed under different coverage length, the number of layers, and the location of CFRP composite. ANSYS software was used to analyze the SHS steel beams. The results showed that the coverage length, the number of layers, and the location of CFRP composite are effective in increasing the ultimate load capacity of the continuous SHS steel beams. Application of CFRP composite also caused the ductility increase some strengthened specimens.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.510-512
• /
• 2000

This paper describes the voltage induced at neutral line and the proper location of lightning arrester in combined 22.9 kV class distribution line jointed overhead line and cable each other Modeling is established in ATP Draw to perform simulation. Simulated distribution line at this paper consists of distribution line 4.2km and underground distribution line 2km. Overvoltage and induced voltage are analyzed at several point of combined line. Analysis results was compared to select the best point to install arrester. Such analysis technology will be applied to obtaining capacity and location of arrester in the similar combined distribution line.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1211-1212
• /
• 2008

In this paper, we propose image process modeling as a part of location based surveillance system for unauthorized target recognition and tracking in harbor, airport, military zone. For this, we compress and store background image in lower resolution and perform object extraction and motion tracking by using sobel edge detection and difference picture method between real images and a background image. In addition to, we use Independent Component Analysis Neural Network for moving target recognition. Experiments are performed for object extraction and tracking of moving targets on road by using static camera in 20m height building and it shows the robust results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1832-1843
• /
• 1995

Tool interference is one of the most critical problems in sculptured surface machining. When machining cavities and concaves, the tool frequently overcuts the portions of the surface, which cause inaccuracy in machining. So tool interference-free paths must be generated for rough cutting more efficiently. In this paper a software using SSI(Surface/Surface intersection) algorithm is developed for eliminating tool interference which occurs in an offset surface in 3-dimensional free form surface modeling. this work consists of two stages : using the offset data, the intersection curves are rapidly checked by this algorithm at the first stage. CL(cutter location) data are obtained by deleting the loop section of intersected offset patches at the second stage. This algorithm can reduce the amount of memory required to store machining data and also easily check region which have the possibility of intersection. Also, This software is verified to be useful in machining a curved object on a DNC milling machine.

• Coupled systems mechanics
• /
• v.5 no.2
• /
• pp.157-190
• /
• 2016

This paper deals with frequency analysis of Euler-Bernoulli beams carrying an arbitrary number of Kelvin-Voigt viscoelastic dampers, subjected to harmonic loads. Multiple external/internal dampers occurring at the same position along the beam axis, modeling external damping devices and internal damping due to damage or imperfect connections, are considered. The challenge is to handle simultaneous discontinuities of the response, in particular bending-moment/rotation discontinuities at the location of external/internal rotational dampers, shear-force/deflection discontinuities at the location of external/internal translational dampers. Following a generalized function approach, the paper will show that exact closed-form expressions of the frequency response under point/polynomial loads can readily be derived, for any number of dampers. Also, the exact dynamic stiffness matrix and load vector of the beam will be built in a closed analytical form, to be used in a standard assemblage procedure for exact frequency response analysis of frames.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.304-307
• /
• 2005

A numerical modelling method using a backward-in-time advection dispersion equation is introduced in assessing the vulnerability of groundwater to contaminants as an alternative to classical vulnerability mapping methods. The flux and resident concentration measurements are normalized by the total contaminants mass released to the system to provide the travel time probability density function and the location probability function. With the results one can predict the expected travel time of a contaminant from up stream location to a well and also the relative concentration of the contaminant at a well. More specific groundwater vulnerability can be mapped by these predicted measurements.