• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.699-705
• /
• 2012

In this paper, an infrastructure-based localization method using underwater wireless sensor network (UWSN) is addressed. A localization using the UWSN is necessary to widen the usage of underwater applications, however it is very difficult to establish the UWSN due to the restrictions of water. In this paper, to extend the usage of UWSN at the infrastructure, we propose a sophisticated UWSN localization method using the Received Signal Strength Indicator (RSSI) of the electromagnetic waves. During the electromagnetic waves propagating in underwater, there arises a lot of attenuation according to the distance, while the attenuation shows uniformity according to the distance. Using this characteristics, the localization system in underwater infrastructure is proposed and the experimental results show the effectiveness.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1797-1801
• /
• 2005

SLAM(Simultaneous localization and mapping) and AI(Artificial intelligence) have been active research areas in robotics for two decades. In particular, localization is one of the most important issues in mobile robot research. Until now expensive sensors like a laser sensor have been used for the mobile robot's localization. Currently, as the RFID reader devices like antennas and RFID tags become increasingly smaller and cheaper, the proliferation of RFID technology is advancing rapidly. So, in this paper, the smart floor using passive RFID tags is proposed and, passive RFID tags are mainly used to identify the mobile robot's location on the smart floor. We discuss a number of challenges related to this approach, such as RFID tag distribution (density and structure), typing and clustering. In the smart floor using RFID tags, because the reader just can senses whether a RFID tag is in its sensing area, the localization error occurs as much as the sensing area of the RFID reader. And, until now, there is no study to estimate the pose of mobile robot using RFID tags. So, in this paper, two algorithms are suggested to. We use the Markov localization algorithm to reduce the location(X,Y) error and the Kalman Filter algorithm to estimate the pose(q) of a mobile robot. We applied these algorithms in our experiment with our personal robot CMR-P3. And we show the possibility of our probability approach using the cheap sensors like odometers and RFID tags for the mobile robot's localization on the smart floor.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.11
• /
• pp.2657-2675
• /
• 2013

A novel neighbor selection-based fingerprinting algorithm using matrix correlation (MC) for Wi-Fi localization is presented in this paper. Compared with classic fingerprinting algorithms that usually employ a single received signal strength (RSS) sample, the presented algorithm uses multiple on-line RSS samples in the form of a matrix and measures correlations between the on-line RSS matrix and RSS matrices in the radio-map. The algorithm makes efficient use of on-line RSS information and considers RSS variations of reference points (RPs) for localization, so it offers more accurate localization results than classic neighbor selection-based algorithms. Based on the MC algorithm, an error estimation method using artificial neural network is also presented to fuse available information that includes RSS samples and localization results computed by the MC algorithm and model the nonlinear relationship between the available information and localization errors. In the on-line phase, localization errors are estimated and then used to correct the localization results to reduce negative influences caused by a static radio-map and RP distribution. Experimental results demonstrate that the MC algorithm outperforms the other neighbor selection-based algorithms and the error estimation method can reduce the mean of localization errors by nearly half.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.87-107
• /
• 2015

Considering the localization estimation issue in mixed line-of-sight (LOS)/non-LOS(NLOS) environments based on received signal strength (RSS) measurements in wireless sensor networks, a grid-based correlation method based on the relationship between distance and RSS is proposed in this paper. The Maximum-Likelihood (ML) estimator is appended to further improve the localization accuracy. Furthermore, in order to reduce computation load and enhance performance, an improved recursively version with NLOS mitigation is also proposed. The most advantages of the proposed localization algorithm is that, it does not need any prior knowledge of the propagation model parameters and therefore does not need any offline calibration effort to calibrate the model parameters in harsh environments, which makes it more convenient for rapid implementation in practical applications. The simulation and experimental results evidence that the proposed localization algorithm exhibits good localization performance and flexibilities for different devices.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.551-560
• /
• 2010

In this paper, we suggest a localization method of factors affecting the accuracy of Air-to-Ground weapon delivery. The proposed method, called FBEL(Factor-Based Error Localization), is based on the fault localization technique widely utilized in the realm of software engineering field. FBEL localizes the major factors affecting the performance of weapon delivery. To analyze the effectiveness and the applicability of FBEL, we applied FBEL to real firing data and got the major factors caused the errors. We expect that the method could contribute to improve the quality of weapon delivery system. We also expect that it may aid improvement of pilot capability greatly, if it is applied to pilot firing training.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.6
• /
• pp.2044-2059
• /
• 2022

Recent works have shown that the geometric constraint can be harnessed to boost the performance of CNN-based camera localization. However, the existing strategies are limited to imposing image-level constraint between pose pairs, which is weak and coarse-gained. In this paper, we introduce a pixel-level epipolar geometry constraint to vanilla localization framework without the ground-truth 3D information. Dubbed EpiLoc, our method establishes the geometric relationship between pixels in different images by utilizing the epipolar geometry thus forcing the network to regress more accurate poses. We also propose a variant called EpiSingle to cope with non-sequential training images, which can construct the epipolar geometry constraint based on a single image in a self-supervised manner. Extensive experiments on the public indoor 7Scenes and outdoor RobotCar datasets show that the proposed pixel-level constraint is valuable, and helps our EpiLoc achieve state-of-the-art results in the end-to-end camera localization task.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.1
• /
• pp.78-83
• /
• 2020

Recently, the use of domestic products securing domestic technology is encouraged, because of export restrictions of the countries or DMSMS(diminishing manufacturing sources and shortages). Domestic weapon systems are actively focused on the parts localization process of R&D projects based on Systems Engineering. However, it is the only way to do technical review for Systems Engineering process up to now. There is a case of application in Localization with Systems Engineering process, but the SE activity is not enough. This study is how to apply Systems Engineering process to Localization effectively based on real cases.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.670-691
• /
• 2013

In RSSI-based RFID(Radio Frequency IDentification) indoor localization system, the signal path loss model of each sub-region is different from others in the whole localization area due to the influence of the multi-path phenomenon and other environmental factors. Therefore, this paper divides the localization area into many sub-regions and constructs separately the signal path loss model of each sub-region. Then an improved LANDMARC method is proposed. Firstly, the deployment principle of RFID readers and tags is presented for constructing localization sub-region. Secondly, the virtual reference tags are introduced to create a virtual signal strength space with RFID readers and real reference tags in every sub-region. Lastly, k nearest neighbor (KNN) algorithm is used to locate the target object and an error compensating algorithm is proposed for correcting localization result. The results in real application show that the new method enhances the positioning accuracy to 18.2% and reduces the time cost to 30% of the original LANDMARC method without additional tags and readers.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.6
• /
• pp.768-775
• /
• 2009

In this paper, the sound source localization system in real time which uses the time delay of arrival signal is proposed. This system uses minimum microphones and surveillance camera for estimation of the sound source localization and sound direction. To apply this system to the military field, four models(model1~model4) are derived. Model 1 can be used to evaluate the sound source localization at the long distance. Model2 and model3 can be applied to estimate the sound direction. Model4 is useful for the special purpose and potable device. It is possible for this system to be used for the military guard and surveillance. As a result of experiments, It is shown that this system can estimate the sound source localization and the sound direction using minimum microphones.

• Journal of Computing Science and Engineering
• /
• v.9 no.3
• /
• pp.142-154
• /
• 2015

Fault localization techniques help locate faults in source codes by exploiting collected test information and have shown promising results. To precisely locate faults, the techniques require a large number of test cases that sufficiently exercise the executable statements together with the label information of each test case as a failure or a success. However, during the process of software development, developers may not have high-coverage test cases to effectively locate faults. With the test case generation techniques, a large number of test cases without expected outputs can be automatically generated. Whereas the execution results for generated test cases need to be inspected by developers, which brings much manual effort and potentially hampers fault-localization effectiveness. To address this problem, this paper presents a method to select a few test cases from a number of test cases without expected outputs for result inspection, and in the meantime selected test cases can still support effective fault localization. The experimental results show that our approach can significantly reduce the number of test cases that need to be inspected by developers and the effectiveness of fault localization techniques is close to that of whole test cases.