The idea of using measured dynamic characteristics for damage detection is attractive because it allows for a global evaluation of the structural health and condition. However, vibration-based damage detection for complex structures such as long-span cable-supported bridges still remains a challenge. As a suspension or cable-stayed bridge involves in general thousands of structural components, the conventional damage detection methods based on model updating and/or parameter identification might result in ill-conditioning and non-uniqueness in the solution of inverse problems. Alternatively, methods that utilize, to the utmost extent, information from forward problems and avoid direct solution to inverse problems would be more suitable for vibration-based damage detection of long-span cable-supported bridges. The auto-associative neural network (ANN) technique and the probabilistic neural network (PNN) technique, that both eschew inverse problems, have been proposed for identifying and locating damage in suspension and cable-stayed bridges. Without the help of a structural model, ANNs with appropriate configuration can be trained using only the measured modal frequencies from healthy structure under varying environmental conditions, and a new set of modal frequency data acquired from an unknown state of the structure is then fed into the trained ANNs for damage presence identification. With the help of a structural model, PNNs can be configured using the relative changes of modal frequencies before and after damage by assuming damage at different locations, and then the measured modal frequencies from the structure can be presented to locate the damage. However, such formulated ANNs and PNNs may still be incompetent to identify damage occurring at the deck members of a cable-supported bridge because of very low modal sensitivity to the damage. The present study endeavors to enhance the damage identification capability of ANNs and PNNs when being applied for identification of damage incurred at deck members. Effort is first made to construct combined modal parameters which are synthesized from measured modal frequencies and modal shape components to train ANNs for damage alarming. With the purpose of improving identification accuracy, effort is then made to configure PNNs for damage localization by adapting the smoothing parameter in the Bayesian classifier to different values for different pattern classes. The performance of the ANNs with their input being modal frequencies and the combined modal parameters respectively and the PNNs with constant and adaptive smoothing parameters respectively is evaluated through simulation studies of identifying damage inflicted on different deck members of the double-deck suspension Tsing Ma Bridge.
Purpose - The objective of this research is to investigate whether national culture influences consumers' service evaluations. The services industry is receiving increasing attention from academia and practitioners as its position grows in global markets. Standardization or localization is a traditional managerial decision in global business. As the boundaries of services expand across national borders, firms are required to decide whether to standardize services or adjust to local needs. Though it is imperative to reflect global perspectives in marketing theories, these perspectives are mostly based on Western conceptualization of the world. Through a comparison of consumer groups from two culturally remote countries, service quality evaluation mechanisms are examined based on similar stimuli. The study tries to expand service marketing perspectives across national borders. Research design, data, and methodology - Eastern and Western countries are known to be culturally distinct. One Eastern and one Western country were chosen: an Anglo-Saxon country (the U.S., England, and Australia) and South Korea. In Hofstede's cultural dimensions, the differences between the two are pronounced. The Anglo-Saxon based countries share many similarities. Samples of the same sites are targeted. Questionnaires using a service quality scale (SERVQUAL) and a customer satisfaction scale were distributed. Utilizing Hofstede's typology of culture, the service evaluation mechanisms of the respondents from the two groups are evaluated. Three hypotheses are proposed from the review of the literature. These are service evaluation habits, importance of service quality dimensions for the individualistic/collectivistic countries, and strong/weak uncertainty avoidance cultures. Consumers from the individualistic countries are considered to care about themselves and demand a higher level of responsiveness and assurance. On the other hand, consumers from high uncertainty avoidance cultures are assumed to rely more on tangible questions of service quality, as these are the only predictable service quality indicators. A t-test and regression analysis are applied to validate the constructs. Results - The respondents from the Anglo-Saxon countries are more generous on service evaluations than Koreans. Researchers have indicated that Americans tend to give higher service evolution scores than European, Mexican, and Korean counterparts. The tendency is the same here. The sample from Anglo-Saxon countries demonstrated higher service evaluation scores on every dimension of SERVQUAL. For the second hypothesis, the respondents from the collectivistic culture rely less on core service dimensions (assurance and responsiveness) due to their tendency to place more value on group harmony than individual interest. However, the third hypothesis was not validated. Conclusions - The study attempted to expand the scope of service marketing to reflect cross-national perspectives. Service quality is known to have a strong influence on customer satisfaction and loyalty behavior. However, this research demonstrated that individuals from different cultural territories respond heterogeneously to the same stimuli. Scholars argue that national cultures are main factors in such deviated behavior. Scholars and global managers should be aware of differences in consumer value judgment mechanisms such as satisfaction, expectations, and perceptions.
Korean Journal of Construction Engineering and Management
/
v.18
no.4
/
pp.57-66
/
2017
Using bidding data collected from the World Bank's open database, this research performed a series of competitive analyses of the major countries that have participated in the Bank's engineering consulting services contracts in Vietnam. The goal of the analysis was to evaluate the performance of Korean engineering firms to date, and provide strategic recommendations for future projects. Results showed that Korean firms had a high bid acceptance rate, comparable to major developed countries. The success was attributed to the high technical scores in the selection process. Comparatively, financial scores were not competitive and inferior to developing countries such as China and India. Results of a 'Skitmore' analysis revealed that Korea was competitive in medium size projects and were situated between developed and developing countries. Korea thus needs to increase participation in basic and detailed design services, 2) improve labor costs through 'localization' and latest technologies, and 3) and venture into larger sized projects.
Purpose - This study aims to seek various plans to maintain the advancement of the overseas and domestic employment scenario through a case analysis of the Japanese industry, which maintains domestic employment while promoting the overseas advancement of companies despite having a similar industrial structure as Korea. The study further intends to derive insightful implications for Japanese manufacturing companies and government policies. Research design, data, and methodology - We selected four companies from the Japanese manufacturing industry. Being companies that were successful in increasing the domestic employment scenario while advancing in overseas markets. We utilized several secondary data sources including Japanese newspapers and report literature. Results - Previous studies have shown a negative relationship between Foreign Direct Investment (FDI) or offshoring and domestic employment. However, our results showed this relationship with respect to the Japanese manufacturing industry as follows: 1. FDI for developing overseas markets does not decrease domestic production. If Japanese companies change their strategy from exports to overseas production, there will be a consequent decrease in domestic employment of Multinational Enterprises (MNEs). However, the local production that plans the sales expansion of a foreign market does not substitute domestic production. 2. Several case studies illustrate that, as the production of final goods is expanded in foreign countries, there is a corresponding increase in the export of intermediary goods from Japan. In this case, if the production process of Japanese companies is promoted in foreign markets, the amount of exported material and parts from Japan will consequently increase. 3. It is difficult to consider that the establishment of subsidiary companies in foreign countries by manufacturing companies for wholesale, retail, and services decreases domestic employment. This is because the international development of these industries needs expatriates, expatriate training organizations, and research and development (R&D) activities. 4. When there is overseas demand, the growth of local management activities is expected to increase the work of the overseas business department in the head office in Japan, if competitiveness can be secured for better localization and management speed. 5. The conversion of the domestic manufacturing industry into high value-added production is necessary. The relocation of domestic production to foreign markets decreases domestic employment. To prevent this, the upgradation of domestic production bases, including high value-added production, and R&D capability need to be strengthened. Technology-based companies must develop new technology, patents, processes, and so forth, which require extensive human resources for R&D. Conclusions - Domestic medium-sized companies that are capable of consistently supplying high value-added products should be actively encouraged to deploy into and develop overseas markets. Further, this paper considers the necessity of a guidance policy that provides suggestions for overseas deployment, by the initiation of the government, to companies that cannot do so due to the lack of foreign experience or decisions by the CEO, despite having the relevant capability and technologies to supply high value-added products.
The aim of this research is to analyze the priority to functions of the U-city Service Aid Organization(USAO), which is to support invigorating U-City industry. This research analyzes the relative importance and the priority about the functional area and components of UASO based on AHP. This research also performs a sensitivity analysis. The research result shows that relative importance of functional area is like following orders: 1) distribution of U-City service-related information, 2) quality certification of U-City-related products and services, 3) R&D of U-City technology, 4) standardization of U-City, 5) U-City human resource development. The relative importance order of functional components is 1) establishment of U-City information distribution organization, 2) construction and management of U-City information distribution network, 3) supporting U-City information distribution and price policy, 4) providing U-City information list for distribution, 5) preparation and application of quality certification standard of U-City products and services, 6) research on legal system of U-City items, targets, and procedures for quality certification, 7) research, analysis, and provision of U-City information distribution situation, 8) level examination of constructed infrastructures and services in U-City, 9) U-City core technology development and localization of technology, 10) standardization of collected U-City information, service classification, distribution system. This research result can be applied directly to design functions of USAO. The result also can be used for duty management, human resource planning, or resource allocation.
Journal of Korean Tunnelling and Underground Space Association
/
v.24
no.6
/
pp.525-538
/
2022
In Korea, safety accidents are continuously occurring due to the aging of underground facilities and lack of systematic management. Moreover, although the underground space is continuously being developed, the current status information is not clearly recorded and managed, so there is a limit to the systematic management of underground facilities. Therefore, this study developed an augmented reality-based system that can effectively maintain and manage underground facilities that are difficult to manage because they are located underground. In order to develop an augmented reality-based underground facility management system, three essential requirements, 'precise localization', 'use of BIM information', and 'ensure usability' were derived and reflected in the system. By utilizing Broadcast-RTK, the positional precision was secured to cm level, and the configuration and attribute information of the BIM was converted into the IFC format to construct a system that could be implemented in augmented reality. It developed an application that can optimize usability. Finally, through simulation, the configuration and attribute information of structures and mechanical systems constituting underground facilities were implemented in augmented reality. In addition, it was confirmed that the accurate and highly consistent augmented reality system works even in harsh environment (near high-rise building).
Emotion has a direct influence such as decision-making, perception, etc. and plays an important role in human life. For the convenient and accurate recognition of high-arousal negative emotion, the purpose of this paper is to design an algorithm for analysis using the bio-signal. In this study, after two emotional induction using the 'normal' / 'fear' emotion types of videos, we measured the Galvanic Skin Response (GSR) signal which is the simple of bio-signals. Then, by decomposing Tonic component and Phasic component in the measured GSR and decomposing Skin Conductance Very Slow Response (SCVSR) and Skin Conductance Slow Response (SCSR) in the Phasic component associated with emotional stimulation, extracting the major features of the components for an accurate analysis, we used a discrete wavelet transform with excellent time-frequency localization characteristics, not the method used previously. The extracted features are maximum value of Phasic component, amplitude of Phasic component, zero crossing rate of SCVSR and zero crossing rate of SCSR for distinguishing high-arousal negative emotion. As results, the case of high-arousal negative emotion exhibited higher value than the case of low-arousal normal emotion in all 4 of the features, and the more significant difference between the two emotion was found statistically than the previous analysis method. Accordingly, the results of this study indicate that the GSR may be a useful indicator for a high-arousal negative emotion measurement and contribute to the development of the emotional real-time rating system using the GSR.
The recently published and new results on design and fabrication of magnetophotonic crystals of different dimensionality are surveyed. Coupling of polarized light to 3D photonic crystals based on synthetic opals was studied in the case of low dielectric contrast. Transmissivity of opals was demonstrated to strongly depend on the propagation direction of light and its polarization. It was shown that in a vicinity of the frequency of a single Bragg resonance in a 3D photonic crystal the incident linearly polarized light excites inside the crystal the TE- and TM-eigen modes which passing through the crystal is influenced by Brags diffraction of electromagnetic field from different (hkl) sets of crystallographic planes. We also measured the faraday effect of opals immersed in a magneto-optically active liquid. It was shown that the behavior of the faraday rotation spectrum of the system of the opal sample and magneto-optically active liquid directly interrelates with transmittance anisotropy of the opal sample. The photonic band structure, transmittance and Faraday rotation of the light in three-dimensional magnetophotonic crystals of simple cubic and face centered cubic lattices formed from magneto-optically active spheres where studied by the layer Korringa-Kohn-Rostoker method. We found that a photonic band structure is most significantly altered by the magneto-optical activity of spheres for the high-symmetry directions where the degeneracies between TE and TM polarized modes for the corresponding non-magnetic photonic crystals exist. The significant enhancement of the Faraday rotation appears for these directions in the proximity of the band edges, because of the slowing down of the light. New approaches for one-dimensional magnetophotonic crystals fabrication optimized for the magneto-optical Faraday effect enhancement are proposed and realized. One-dimensional magnetophotonic crystals utilizing the second and the third photonic band gaps optimized for the Faraday effect enhancement have been successfully fabricated. Additionally, magnetophotonic crystals consist of a stack of ferrimagnetic Bi-substituted yttrium-iron garnet layers alternated with dielectric silicon oxide layers of the same optical thickness. High refractive index difference provides the strong spatial localization of the electromagnetic field with the wavelength corresponding to the long-wavelength edge of the photonic band gap.
In line with the government's policies for localization, furniture industry in the northern area in Gyeoggi-province at presence has been operated by several furniture industrial complexes in the region in small scale, but now it should be considered from overall view of furniture industry in order to develop more competitive industry. As a matter of this fact, Gyeonggi-province should be engaged in planning to make various industrial clusters of the furniture-related industry based on the northern area of province at structural as well as politic aspects, with the help of the analyzed status of the current furniture industry in region, in supporting them by the systemized policies and developing the overall program to foster furniture as an international-competitive industry. Therefore this study suggested 'furniture industry center' which will exclusively handle and maintain the network of each furniture company in the northern area of Gyeonggi-province and 'high-tech furniture industry complex' to keep pace with the globalization and to be competitive internationally and also 'common brand business' for the cooperation at technical phase. In order to realize and vitalize such suggestions, it is urgently necessary that the network consists of the furniture companies and the expert of the related department in local universities as the main body for furniture industry, of course Gyeonggi-province as well.
Choi, Yun Sub;Jin, Mi Hyun;Choi, Heon Ho;Lee, Sang Jeong;Park, Chansik
The Journal of Korean Institute of Communications and Information Sciences
/
v.37C
no.11
/
pp.1077-1083
/
2012
The jamming countermeasures in GNSS includes anti-jamming technique and jammer localization technique. In both techniques, direction of jamming signal is important and generally the MUSIC algorithm is used to find the direction of jamming signal. The MUSIC is super-resolution algorithm for detecting incident direction of signal. But, the search time of MUSIC algorithm is too long because all candidates of incidence angle are searched. This paper proposes the new method that has less computational burdens and therefore faster than the conventional MUSIC algorithm. The proposed method improves performance speed by reducing unnecessary calculations. In the proposed method, the cost function of conventional MUSIC algorithm is decomposed into the sum of squares and if the partial sum of cost function is larger than the minimum cost function so far, then the candidate is rejected and next candidates are searched. If the computed cost function is less than the minimum cost function so far, the minimum cost function so far is replaced with newly computed value. The performance of the proposed method was compared with the conventional MUSIC algorithm using the simulation. The accuracy of the estimaed direction of jamming signal was same as the conventional MUSIC while the search speed of the proposed method was 1.15 times faster than the conventional MUSIC.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.