• Journal of Forest and Environmental Science
• /
• v.35 no.2
• /
• pp.102-114
• /
• 2019

The issue of sustainable forest management (SFM) continues to emerge as part of the REDD+ mechanism mitigation efforts. Especially for some developing countries, such as Indonesia, forest management is required to provide benefits to the welfare of local communities in addition to forest conservation efforts. This study aims to identify the economic, social, and environmental impacts of community-based forest management (CBFM) implementation activities, which is one of the implementations of SFM at field level. The primary objectives were to find out the impacts of CBFM activities based on local people's perceptions and to identify what factors need to be considered to increase local people's satisfaction on CBFM activities. The data from 6 sub-villages was derived through surveys with local people involved in CBFM activities, interviews with a key informant, and supported by secondary data. The results of the study state that CBFM activities have increased the local people's income as well as their welfare, strengthening the local institution, and help to resolve conflicts in the study area. CBFM has also been successful in protecting forests by rehabilitating unproductive lands and increase forest cover area. By using binary logistic regression analysis, it found that income, business development opportunities, access to forests, conflict resolution, institutional strengthening, and forest rehabilitation variable significantly affected the local people's satisfaction of CBFM activities.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.6
• /
• pp.208-216
• /
• 1996

This paper presents a decentralized control scheme for interconnected systems with unmodeled nonlinearities and interactions using a neural coordinator. The interactions due to the interconnection and the unmodeled nonlinearity associated with each subsystem are represented by the deviations from linearized states of decomposed subsystems. the decentralized controller is composed of local controllers and a neural coordinator. The local controller for each subsystem is derived from linearized local system parameters y linear optimal control theory. the neural cooridnator generates a corrective control signal to cancel the effect of deviation sthrough the backpropagation learning with the rrors obtained form the difference of the local system outputs and reference model outputs. the reference model consists of the part of local system without deviations. The effectiveness of the proposed control scheme is demonstrated by simulation studies.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.58-66
• /
• 2007

This paper introduces the new generic dynamic neuro-fuzzy local modeling system (DNFLMS) that is based on a dynamic Takagi-Sugeno (TS) type fuzzy inference system for complex dynamic hydrological modeling tasks. The proposed DNFLMS applies a local generalization principle and an one-pass training procedure by using the evolving clustering method to create and update fuzzy local models dynamically and the extended Kalman filtering learning algorithm to optimize the parameters of the consequence part of fuzzy local models. The proposed DNFLMS is applied to develop the inference model to forecast the flow of Waikoropupu Springs, located in the Takaka Valley, South Island, New Zealand, and the influence of the operation of the 32 Megawatts Cobb hydropower station on springs flow. It is demonstrated that the proposed DNFLMS is superior in terms of model accuracy, model complexity, and computational efficiency when compared with a multi-layer perceptron trained with the back propagation learning algorithm and well-known adaptive neural-fuzzy inference system, both of which adopt global generalization.

• Journal of Korean Association for Spatial Structures
• /
• v.3 no.1 s.7
• /
• pp.69-75
• /
• 2003

This paper is represented a general equations to obtain the elastic local buckling stresses for the flange and web of H-beam under compression at elevated temperatures and is also developed the software to perform the elastic local buckling analysis at elevated temperatures. Eurocode3 Part 1.2 are used to analyse the decrease in steel yield strength and elastic modulus at elevated temperatures. For design examples of 6 H-beams, the elastic local buckling stresses and critical temperatures for the slenderness ratio $(b/t_f\;and\;d/t_w)$ of the flange and web under uniform compression at elevated temperatures have been analysed by a computer program of this paper. It can be seen that the computer analytical results of this study show a good agreement with the experimental results by Wadee.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.333-336
• /
• 2000

In this paper, a profile management system consisting of global and local range finders is presented for the automat ion of material pile handling. A global range finder detects range data of the front part of the piles of material and a profile map is obtained from a 3D profile detection algorithm. A local range finder attached on the side of the arm of the reclaimer detects range data with the handling function dynamically, and a local profile patch is acquired from the range data A yard profile map manager constructs a map by using the 3D profile of the global range finder and revises the map by replacing it with the local profile patch obtained Iron the local range finder. The developed vision system was applied to a simulator and the results of test show that it is appropriate to use for automating the material handling.

• KDI Journal of Economic Policy
• /
• v.44 no.3
• /
• pp.75-99
• /
• 2022

This paper analyzes job creation when the Korean economy transitioned to a knowledge economy from the 1990s to the 2010s. During this period, the ratio of service to manufacturing jobs increased, knowledge intensive industries grew, and job creation became geographically concentrated around Seoul. The changes slowed down in the 2010s, and overall job growth weakened. To analyze the effect of job creation driver industries during this period, the main part of which are knowledge intensive tradable service industries, on local service job creation, I use a modified version of the local labor market of Moretti (2010). I analyze the job changes during 1995-2005 and during 2006-2016 in 237 Si-Gun-Gu areas in the Census on Establishments datasets. I find that one manufacturing job creates 0.5 local service jobs and that one tradable service job creates 1.1 jobs within Gu areas of metro cities and 2.3 jobs in Si-Gun areas. The job creation relationship between the tradable and local service sectors was not altered in this period. As more jobs were created in the tradable sector driven by the transition to a knowledge economy, job creation overall remained active, with the opposite also being true.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.3
• /
• pp.193-210
• /
• 1991

For the deckhouse or superstructure, attention is directed to the reduction of vibration from a human susceptibility point of view. The two basic requirements for obtaining a low vibration level in the accommodation are to ensure that excitation forces from propeller and/or main engine are small and to avoid resonance excitation of the hull and superstructure. In recent years increased attention has been directed towards the problems of vibration and noise in deckhouse, which have caused major problems with regard to the environmental quality in the living quarters for crews. Accordingly, in this paper, the characteristic of the vibration of deckhouse of fishing boat, of which the length/height ratio is also relatively high, are studied systematically with regard to the shape and modelling of deckhouse based on finite element method of 1-dimensional, 2-dimensional and 3-dimensional model. This study is divided into 4-part. 1st part is the global deckhouse vibration, 2nd part is the local deckhouse vibration, 3rd part consists of the estimation for stiffness of foundational support and 4th part is the application to TUNA LONG LINER of 416 ton class. For the global vibration analysis, the severity of the vibration depends on the longitudinal shear and bending stiffness of the deckhouse, on the vertical deckhouse support(fore, aft and sides). However, even if the design is technically sound, vibration problems may arise due to vertical or longitudinal hull girder or afterbody resonances. Author applied the method of this study to the analysis of, deep-sea fishing vessel of G.T. 416 ton class with relatively low height and long deckhouse, and investigated the vibrational characteristic of the fishing vessel with earlier structural feature. According to this investigation, the vibration, response of above vessel was confirmed of which main hull and deckhouse behave as one body. It is at the bottom of vibrational trouble which a accommodation part of the fishing vessel is raised, that is the local vibration for side wall, fore-aft wall and deck plate of deckhouse rather than thief fect of fore-aft vibration of deckhouse for above fishing vessel. and the resonance of main hull, deckhouse and driving system such as the main engine, propeller in exciting source is mainly brought up as the trouble.

• Korean System Dynamics Review
• /
• v.15 no.2
• /
• pp.51-74
• /
• 2014

Over the past few years Korea has achieved rapid economic growth, while the deepening polarization of income has negatively affected Korea economy and society. It can be the reason of this negative effect on economy that the increased income by the economic growth has not been distributed socially, but overly focused on one part of social class. One of the important and powerful solution of social polarization could be the strengthening of the income distribution. In these circumstances, the social interest and discussion on the universal welfare system and on the basic income as the means of income redistribution have been increasing. In this study, a system dynamic analysis was conducted to find how an universal cash payment as basic income providing cash benefits impacts on the promotion of consumption in private sector, of local jobs and of local economic organizations. Recently, the poor energy consumption ability of energy poverty became one of the social problems. Also it was analysed how an energy payment-in-kind as basic income influences on the energy consumption of the region, the energy production capacity, the promotion of local energy. The universal cash payment and energy payment-in-kind as the basic income policy showed similar and positive effects on the local economy system and on the local energy system respectively.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.2
• /
• pp.171-177
• /
• 1993

This experiment was conducted to select and rear the adaptable cultivar which isused for various purpose and to build a year-round cultivation using with characters of aerial part and analysis of chemical components in 28 local cultivar of Artemisia princeps Var. The growth of aerial part, which are stem length, stem diameter, no. of branch, node, leaf size and leaf pubescence, in north local cultivars was more vigorous than those of south local caltivars. Fresh weight of "Myeongcheonssuk " was highest in local caltivars, and in view of local area, local cultivars which was collected from Iri Si and Euiseong Gun was shown the highest fresh weight. Local cultivars as mentioned above had a characters with plenty of leaves, nodes and pubescence of leaf is long. In chemical components of leaves in morth cultivar, content of N, MgO, Zn, Cu, Mn was high, while $P_2O_5,\;K_2O$ in middle local cultivars, Fe in south local cultivars. The more content of carbohydrate in leaves was high, the content of $K_{2}O$ had a increasing tendency. In local cultivars which was collected form Iri Si and Euiseong Gun with the highest fresh weight, content of $N,\;P_{2}O_5,\;K_{2}O$ was high, on the other hand content of MgO, Zn, Ca, Mn, Fe, was low in leaves of Artemisia Princeps Var.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.1
• /
• pp.51-61
• /
• 2004

Mechanical parts are often grouped into part families based on the similarity of their shapes, to support efficient manufacturing process planning and design modification. The 2-part sequence papers present similarity assessment techniques to support part family classification for machined parts. These exploit the multiple feature decompositions obtained by the feature recognition method using convex decomposition. Convex decomposition provides a hierarchical volumetric representation of a part, organized in an outside-in hierarchy. It provides local accessibility directions, which supports abstract and qualitative similarity assessment. It is converted to a Form Feature Decomposition (FFD), which represents a part using form features intrinsic to the shape of the part. This supports abstract and qualitative similarity assessment using positive feature volumes.. FFD is converted to Negative Feature Decomposition (NFD), which represents a part as a base component and negative machining features. This supports a detailed, quantitative similarity assessment technique that measures the similarity between machined parts and associated machining processes implied by two parts' NFDs. Features of the NFD are organized into branch groups to capture the NFD hierarchy and feature interrelations. Branch groups of two parts' NFDs are matched to obtain pairs, and then features within each pair of branch groups are compared, exploiting feature type, size, machining direction, and other information relevant to machining processes. This paper, the second one of the two companion papers, describes the similarity assessment method using NFD.