• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.363-375
• /
• 1997

This study encompasses the performance of static and fatigue test for the 8 large scale test specimens to clarify the fatigue behavior of coped stringer and the effect of the repair and strengthening on the damaged stringer of the floor system in steel railway bridges. For the purpose of the research, the actual stress wave for the existing bridge was measured, the basic stress range frequency histogram was made and the equivalent stress range was calculated. Using the result from the equivalent stress range made by adjusting the stress range, the static and fatigue test was carried out by identifying the previous rehabilitation and after. As the result of the static tests, it was revealed that the level of local stress under the S1 specimen test of the real equivalent stress range was similar to tensile strength of the test material, and it was consistent with the requirement of the initiation condition of the fatigue crack. Through the various rehabilitation methods to the damaged specimens, the effects of the repair and reinforcement were analyzed. According to the results of the repair of effect, bolting the high tension bolt over the stop hole was confirmed to be more adequate method than drilling only stop hole to delay the fatigue crack growth. Futhermore, in case of the stringer subjected by bending moment, the reinforcement over the upper flange side was determined to be a useful strengthening method, and the reinforcement to the web of the stringer was not appropriate to accomodate as a adequate strengthening method. Also it was confirmed that the category of the fatigue design for the coped stringer met with the category E specified on the fatigue design criteria of the Highway Standard Specification in Korea.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.1
• /
• pp.23-34
• /
• 2016

Concrete filled steel tube system has two major advantages. First, the confinement effect of steel tube improves the compressive strength of concrete. Second, the load capacity and deformation capacity of members are improved because concrete restrains local buckling of steel tube. It does, however, involve workability problem of using stud bolts or anchor bolts to provide composite effect for larger cross-sections. While the ribs inside the columns are desirable in terms of compressive behavior, they cause the deterioration in load capacity upon in-plane deformation resulting from thermal deformation. Since the ribs are directly connected with the concrete, the deformation of the ribs accelerates concrete cracking. Thus, it is required to improve the toughness of the concrete to resist the deformation of the ribs. Welding built-up tubular square columns can secure safety in terms of fire resistance if the problem are solved. This study focuses on mixing steel fiber in the concrete to improve the ductility and toughness of the columns. In order to evaluate fire resistance performance, loaded heating test was conducted with 8 specimens. The behavior and thermal deformation capacity of the specimens were analyzed for major variables including load ratio. The reliability of heat transfer and thermal stress analysis model was verified through the comparison of the results between the test and previous study.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.2
• /
• pp.151-160
• /
• 2010

The number of cases of collapsed plastic greenhouses in farmlands has increased due to the heavy local snowfall caused by extraordinary atmospheric phenomena. Consequently, the economic losses of farmers have also increased. However the government policy in relation to damage pretension is insufficient and collapse case is repeated every year. The main reason for frame collapse is that the moment capacity of a steel pipe is not sufficient to resist a heavy snowload. In this study, experiments were conducted on the current frame system of a greenhouse with a tension tie. The frame consisted of two sections(${\phi}25.4{\times}1.5$, ${\phi}31.8{\times}1.5$), and its span length was 6.5 m. A temporary tension tie using a steel wire and a fabric rope was connected to the two joints, to which a curved beam and a straight column were connected. The pretension force was applied at the tension tie, and a vertical force simulating snowfall was applied until failure. The fabric rope frame increased the load-carrying capacity by 10-45% compared to the normal frame without a tension tie, and the steel wire frame increased the load-carrying capacity by 58-73% compared to the normal frame without a tension tie. Steel wire was found to be more effective as far as strength is concerned, but its connection details and pretension application are more difficult and complicated than those of the fabric rope. The test results thus show that the fabric rope is more preferable.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.197-206
• /
• 2004

The ground anchor support system may not be occasionally used because of space limitations in urban excavation sites nearby the existing structures. In this case, soil nailing system with relatively short length of nails could be efficiently adopted as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in an excavation zone of the existing weak subsoils. Pretensioning the soil nails then could play important roles to reduce deformations mainly in the upper part of the nailed-soil excavation system as well as to improve local stability. In this study, a newly modified soil nailing technology named as the PSN (Pretension Soil Nailing), is developed to reduce both facing displacements and ground surface settlements in top-down excavation process as well as to increase the global stability. Up to now, the analytical procedure and design technique are proposed to evaluate maximum pretension force and stability of the PSN system. Also, proposed are techniques to determine the required thickness of a shotcrete facing and to estimate probability of a failure against the punching shear, Based on the proposed procedure and technique, effects of the radius of a influence circle and dilatancy angle on the thickness of a shotcrete facing, bonded length and safety factors are analyzed. In addition, effects of the reduction of deformations expected by pretension of the soil nails are examined in detail throughout an illustrative example and the $FLAC^{2D}$ program analysis. And a numerical approach is proposed PSN system using the shear strength reduction technique with the $FLAC^{2D}$ program.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.473-479
• /
• 2020

In this study, the structural experiment was conducted with two types of specimens to investigate the mechanical behavior of the column-rafter-purlin connection of an arch-type greenhouse under monotonic loading. Based on the experimental results, the flexural performance was analyzed for two types of connections, and connection classification was attempted. Type B showed 77% of flexural performance compared to Type A, and both types showed that the rigidity and flexural strength did not reach the level of the full rigid. The behavior of the column-rafter-purlin connection was dominated by local buckling due to deformation of the weld and fasteners. As a result of connection classification by AISC standard, both Type A and B connections showed a result that did not meet the rigid connection performance assumed during design, and were classified as simple connection. Therefore, the connection performance evaluation and classification results show that the greenhouse design should be made in consideration of connection performance and in order to design a reliable greenhouse structure, a study on establishing clear design standards for the greenhouse connection is necessary.

• The Journal of Korean Medicine
• /
• v.17 no.2 s.32
• /
• pp.100-116
• /
• 1996

Gastric cancer shows the most high friquency in cancers that occurs in Korea. The western medicine treatment for gastric cancer has radiation and surgery, chemical treatment. While, oriental medicine cures the gastric cancer by herb-drugs, acupunture , moxa and srigma. With just one way of treating gastric cancer can't be effective remedy. Because each medicine has a strength and weakness. Thus, it is effective treatment when two medicine combins and supplement each other. We got the following result about a trend of oriental and westernal combination treatment for gastric cancer through studing records. 1. The western medicine treats gastric cancer patient with surgery first and right after surgery. They need on assembly treatent such as chemical and immune treatment. In oriental medicine, they treats gastric cancer patients with differentiation of symptone and signs and treatment(辨證施治)[for example:incoordination between liver and stomach(肝胃不和), insufficiency of spleen and stomach(脾胃虛弱), stagnation of blood stasis and toxic agent(瘀毒內阻), deficiency of yin by stomach heat(胃熱傷陰), reinforcing both qi and blood(氣血雙虧), stagnation of damp-phlegm(痰濕凝結)] and cure for them by acupuncture and stigma, too. 2. In combination with oriental and western medical treatment principle of gastric cancer by each stage is as follows. First stage and second stage gastric cancer is cured with radical surgery mainly. After operation, the herb of invigoration of the spleen(健脾), coordination of the stomach(和胃), and smoothing the liver and regurating the circulation of qi(疏肝理氣), is used for good gastroenteric condition. The second stage patients can be concidered using in combination with chimical treatment. The third stage gastric cancer is treated with radical surgery or with temporizing surgery. After those surgery, herb-drugs treatment is used jointly. The fourth stage patients who have no extensively metastasis or local contraindication can undergo temporizing and curcuit surgical operation. Herb-drugs and chemical treatments are used together for patients after operating. If he has operating contraindication, he would be treated with herb-drugs and chemical treatment. 3. In case of using in combination with oriental and western medical treatment as follows. As for herb-drugs with chemical treatment, reinforcing both qi and blood(補益氣血), invigorate the spleen and the stomach(健脾和胃), reinforcing liver and kidney(滋補脾腎), clear out the heat and relieve the toxic agent(淸熱解毒), can be used and with radiation treatment, clear out the heat and relieve the toxic agent(淸熱解毒), promoting the production body fluid and moisturizing the vicera(生津潤燥), reinforcing both qi and blood(補益氣血), invigorate the spleen and the stomach (健脾和胃), reinforcing liver and kidney(滋補肝腎) etc, can be used. 4. According to the research of oriental and western medical combination treatment are the 5-year-survival degree with oriental and western medicine combination treatment was for better than that just with oriental or western medical treatment. Especially, it has good effect on the third, fourth stage gastric cancer. That is, the middle and the end of stage gastric cancer. 5. The merits of oriental and western medicine combination treatment are lengthers one's life and diminish the bad effect of chemical treatment and radiation treatment be near completion, prevent from relapsing, maintain the balance in their eveirenment of body and improve immunity.

• Korean Journal of Cognitive Science
• /
• v.13 no.2
• /
• pp.1-13
• /
• 2002

This Paper is concerned with the impact of linguistic markers of coherence, such as causal connectives. repetitions. and anchoring devices. on the comprehension of a scientific text in Korean. A scientific text on the process of lightning formation was selected. and two versions of the text were constructed by varying the strength of coherence. Eighty-two undergraduate students took Part in the experiment in which they were instructed to fill in the blanks in each text in a recall and a recognition task and to respond to a set of question in a comprehension test. The results of this experiment revealed a selective effect of the cohesive markers. It was found that the different linguistic signals seem to Play a facilitating role in varying degrees in accordance with the type of tasks involved Moreover an analysis of topic continuity from the beginning paragraphs through the last revealed that the text was better understood in the paragraphs containing the main topic better than those without it. This finding seems to indicate that the off-line processing of scientific text is not influenced solely by the local bottom-up processing alone The effect of topic continuity seems to suggest that a global. top-down processing effect has an important role to play. overriding the impact of cohesive devices.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.269-275
• /
• 2017

Shipwreck remains below the seabed not only effect the ocean currents and tides, but influence the physical properties of sediments and sedimentary environments that comprise the seabed. In particular, the influence of local shipwrecks discovered buried in the seabed on the sediment is visible. In this study, sediments were collected from the surrounding area of Taean Mado No.3 shipwreck using grab samplers and vibro-corers. The physical properties of these sediments were analyzed to evaluate the impact of the Taean Mado shipwreck No.3 remains. Sediment core analysis by means of density and ultrasonic velocity showed that shear strength tended to increase with depth, whereas moisture content and porosity tended to decrease with depth. Grain size analysis results are shown in terms of Folk's classification, where the grain size of the core samples in the study area indicate mud or sandy mud, and that of the grab sample indicates a muddy sand. Results of the sedimentation rate analysis indicate a rate of 2.84 cm/year and carbon dating of the 150 cm deep seashell indicates the Neolithic age. These sediments were analyzed for the study of the relationship between the Taean Mado shipwreck No.3 remains and the physical properties of the sediment.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.24-39
• /
• 2001

These experiments were conducted to evaluate the nutritional and feeding value of red pepper seed oil meal (RPSOM) as local vegetable protein ingredients for poultry feeding. In the first experiment, nutritional values of RPSOM were evaluated by analyzing chemical compositions and determining true metabolizable energy (TME), nitrogen corrected TME (TMEn) and true available amino acid (TAAA) contents. According to the chemical analysis, RPSOM contained 22.50％ of crude protein, 4.75％ of ether extract, 27.70％ of crude fiber, 0.34 mg／g of capsaicin and 49.97 ppm of xanthophylls. The values of TME and TMEn determined by force-feeding 16 roosters (ISA-Brown) were 1.73 kcal／g and 1.63 kcal／g on dry matter basis, respectively. The average TAAA value of 16 amino acids measured by the force－feeding technique was 81.70％. These values were used for formulating experimental diets containing various levels of RPSOM for broiler chicks and laying hens. Two feeding trials were made to investigate the effects of dietary incorporation of RPSOM into chicken feed performances of broiler chicks and laying hens. In the broiler feeding (Exp. 2), a total of two hundred twenty-five, 4 wk old male broiler chicks (Ross) were randomly divided into 9 groups of 25 birds each and assigned to three experimental diets containing 0, 5 and 10% RPSOM. The birds were fed ad libitum the diets for 3 wk and feed intake, weight gain and feed conversion rate were determined. At the end of the feeding, the blood levels of glutamate oxaloacetate transaminase (GOT), gamma glutamyl transpeptidase (GGT), blood urea nitrogen (BUN) and cholesterol, and the body and fatty acid compositions of leg muscle were measured. No significant differences were observed in weight gain, feed intake, feed conversion rate, body composition, serum levels of GOT, GGT and BUN among the treatments. However, blood cholesterol level was lower (P＜0.05) in 10% RPSOM diet group than those in the other. The dietary RPSOM at 5 and 10% levels increased the content of linoleic acid (P＜0.05) in leg muscle compared to that of control group. The results indicate that RPSOM can be used for broiler feed up to 10% without any significant negative effects on broiler performance. In the layer feeding (Exp. 3), the effects of dietary RPSOM on the performances of laying hen were investigated by feeding ninety 45 wk old laying hens (ISA-Brown) with experimental diets containing 0, 5 and 10% RPSOM for 4 wk (30 birds per treatment). Measurements were made on egg production rate, egg weight, feed intake, Haugh unit, egg shell strength which was higher (P＜0.05) in layers fed 10% RPSOM diet compared to those fed 0 and 5% RPSOM diets. Thus, it can be concluded that RPSOM can be included into laying hen feed up to 10% without any harmful effects.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.4
• /
• pp.81-93
• /
• 2013

The selection of land for fishing village development project, and the standard used to classify fishing villages has been determined based on the guidelines developed by fishing village cooperatives. The approach fishing village cooperatives follows is likely to classify fishing villages without first reflecting on the overall development environment of the region, such as other industries and workers in the area. It also acts as a barrier for business promotion or evaluation, because the cooperatives do not match the administrative districts, which are the units of administration, and the main policy enforcement agent in regional development. Against this background, this study aimed to identify categories to situate the development direction, as well as the size and distribution of fishing villages based on eup, myeon, and dong administrative units as defined by the Fishing Villages and Fishery Harbors Act. This study was based on the Census of Agriculture, Forestry, and Fisheries of 2010, and analyzed 826 eups, myeon, and dongs with fishery households using the principal component analysis, and 2-Step cluster analysis methods. Therefore, 95% of the variance was explained using the covariance matrix for types of fishing villages, but it was analyzed as one component focusing on the number and ratio of fishery households, and used the cluster-type analysis, which focused on the sizes of fishing villages. The clusters were categorized into three types: (1) the development type based on the number of fishermen in the eups, myeons and dongs was analyzed as village size (682); (2) administrative district size (121); and (3) total eups, myeons and dongs (23), which revealed that the size of most fishing villages was small. We could explain 73% of the variance using the correlation coefficient matrix, which was divided into three types according to the three principal component scores, namely fishery household power, fishery industry power, and fishing village tourism power. Most fishing villages did not have a clear development direction because all business areas within the region were diversified, and 552 regions could be categorized under the harmonious development type, which is in need of balanced development. The fishery industry type typified by industrial strength included 159 regions in need of an approach based on industrialization of fishery product processing. Specialized production areas, which specialized in producing fishery products, were 115 regions with a high percentage of fishermen. The analysis results indicated that various situations in terms of size and development of fishing villages existed. However, because several regions exist in the form of small village units, it was necessary to approach the project in a manner that directed the diversification of regional development projects, such as places for local residents to relax or enjoy tourism experiences within the region, while considering the overall conditions of the relevant eups, myeons, and dongs. Reinforcement of individual support for fishermen based on the Fisheries Act must take precedence over providing support for fishermen through regional development. In addition, it is necessary to approach the development of fishing villages by focusing on industrializing the processing techniques of fishery products. Areas specialized in the production of fishery products are required to consider the facilities for fisheries production, and must make efforts to increase fishery resources, such as releasing fry.