• Earthquakes and Structures
• /
• v.20 no.2
• /
• pp.149-160
• /
• 2021

Buildings made using the locally available clay materials are amongst the least expensive forms of construction in many developing countries, and therefore, widely popular in remote areas. It is despite the fact that these low-strength masonry structures are vulnerable to seismic forces. Since transporting imported materials like cement and steel in areas inaccessible by motorable roads is challenging and financially unviable. This paper presents, and experimentally investigates, adobe masonry structures that utilize the abundantly available local clay materials with moderate use of imported materials like cement, aggregates, and steel. Shake-table tests were performed on two 1:3 reduce-scaled adobe masonry models for experimental seismic testing and verification. The model AM1 was confined with vertical lightly reinforced concrete columns provided at all corners and reinforced concrete horizontal bands (i.e., tie beams) provided at sill, lintel, and eave levels. The model AM2 was confined only with the horizontal bands provided at sill, lintel, and eave levels. The models were subjected to sinusoidal base motions for studying the damage evolution and response of the model under dynamic lateral loading. The lateral forcedeformation capacity curves for both models were developed and bi-linearized to compute the seismic response parameters: stiffness, strength, ductility, and response modification factor R. Seismic performance levels, story-drift, base shear coefficient, and the expected structural damages, were defined for both the models. Seismic performance assessment of the selected models was carried out using the lateral seismic force procedure to evaluate their safety in different seismic zones. The use of vertical columns in AM1 has shown a considerable increase in the lateral strength of the model in comparison to AM2. Although an R factor equal to 2.0 is recommended for both the models, AM1 has exhibited better seismic performance in all seismic zones due to its relatively high lateral strength in comparison to AM2.

• Advances in concrete construction
• /
• v.11 no.5
• /
• pp.375-386
• /
• 2021

In this paper, a study of stability and health of a newly-built railway tunnel is presented. The field test was implemented to monitor the secondary lining due to the significant cracking behaviors influenced the stability and health of the tunnel structure. Surface strain gauges were installed for monitoring the status of crack openings, and the monitoring outputs demonstrated that the cracks were still in the developing stage. Additionally, adjacent tunnel and poor condition of surrounding rock were identified as the causes of the lining cracking by systematically characterizing the crack spatial distribution, tunnel site and surrounding rock conditions. Reconstruction of partial lining and reconstruction of the whole secondary lining were designed as the maintenance projects for different cracking regions based on the construction feasibility. For assessing the health conditions of the reinforced lining, embedded strain gauges were set up to continuously measure the strain and the internal force of the reconstructed structures. For the partially reconstructed lining, the outputs show the maximum tensile elongation is 0.018 mm during 227 days, which means the structure has no obvious deformation after maintenance. The one-year monitoring of full-section was implemented in the other two completely reconstructed cross-sections by embedded strain gauge. The outputs show the reconstructed secondary lining has undertaken the pressure of surrounding rock with the time passing. According to the calculated compressive and tensile safety factors, the completely reconstructed lining has been in reliable and safe condition during the past year after reinforcement. It can conclude that the aforementioned maintenance projects can effectively ensure the stability and health of this tunnel.

• The Korean Journal of Physiology and Pharmacology
• /
• v.25 no.2
• /
• pp.131-137
• /
• 2021

Aging is the process spontaneously occurred in living organisms. Cardiac fibrosis is a pathophysiological process of cardiac aging. Mangiferin is a well-known C-glucoside xanthone in mango leaves with lots of beneficial properties. In this study, rat model of cardiac fibrosis was induced by injected with 150 mg/kg/d D-galactose for 8 weeks. The age-related cardiac decline was estimated by detecting the relative weight of heart, the serum levels of cardiac injury indicators and the expression of hypertrophic biomakers. Cardiac oxidative stress and local inflammation were measured by detecting the levels of malondialdehyde, enzymatic antioxidant status and proinflammatory cytokines. Cardiac fibrosis was evaluated by observing collagen deposition via masson and sirius red staining, as well as by examining the expression of extracellular matrix proteins via Western blot analysis. The cardiac activity of profibrotic TGF-β1/p38/MK2 signaling pathway was assessed by measuring the expression of TGF-β1 and the phosphorylation levels of p38 and MK2. It was observed that mangiferin ameliorated D-galactose-induced cardiac aging, attenuated cardiac oxidative stress, inflammation and fibrosis, as well as inhibited the activation of TGF-β1/p38/MK2 signaling pathway. These results showed that mangiferin could ameliorate cardiac fibrosis in D-galactose-induced aging rats possibly via inhibiting TGF-β/p38/MK2 signaling pathway.

• Journal of Audiology & Otology
• /
• v.23 no.3
• /
• pp.129-134
• /
• 2019

Background and Objectives: Sine a self-reported questionnaire for hearing-impaired listeners is not available by Malay language yet, it is important to develop or translate any available existing questionnaires. The aim of this study was to translate, adapt and validate the Hearing Handicap Inventory for Adult (HHIA) to be used by the audiologist among the hearing-impaired population in Malaysia. Subjects and Methods: The HHIAs was translated to Malay language using forward-backward translation techniques by four-panellists (two for each level). The translated HHIA was then reconciled and harmonized for cultural aspects and content of the questionnaire by the researchers and two expert panels before being pilot-tested among 10 hearing-impaired patients. Questionnaire validation was conducted among 80 adults with a hearing loss to calculate for Cronbach's α (internal reliability), Spearman's correlation (inter-item correlation) and factor analysis. Results: None of the translated items were removed from the scale. The overall Cronbach's α was 0.964; 0.927 and 0.934 for both social and emotional subscales, respectively. The factor analysis (force-concept inventory) demonstrated a two-structure with a strong correlation between all items in either component 1 or 2, that resembled the original scale. The Mann-Whitney test revealed significantly higher scores for those adults with a hearing loss than those adults with normal hearing. Conclusions: The Malay HHIA has been successfully translated and validated for the purpose of determining the psychosocial aspects of adults with hearing loss in the local population.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.2
• /
• pp.77-85
• /
• 2023

In this study, the mechanical properties of the Al-Mg-X (X=Cr, Si) alloy, which clearly showed the influence of the specimen and grain size, were investigated by changing the specimen size extensively. In addition, the effect on the specimen size, grain size and aging condition on the mechanical properties of the grain refining alloy according to the addition of Cr was clarified, and the relationship between these factors was studied. As the specimen size decreased, the yield stress decreased and the fracture elongation increased. This change was evident in alloys with coarse grain sizes. Through FEM analysis, it was confirmed that the plastic deformation was localized in the parallel part of specimen S2. Therefore, when designing a tensile specimen of plate material, the W/L balance should be considered along with the radius of curvature of the shoulder. In the case of under-aged materials of alloys with coarse grain size, the fracture pattern changed from intergranular fracture to transgranular fracture as W/d decreased, and δ increased. This is due to the decrease in the binding force between grains due to the decrease in W. In the specimen with W/d > 40 or more, intergranular fracture occurred, and local elongation did not appear. Under-aged materials of alloys with fine grain size always had transgranular fracture over a wide range of W/d = 70~400. As W/d decreased, δ increased, but the change was not as large as that of alloys with coarse grain sizes. Compared to the under-aged material, the peak-aged material did not show significant dependence on the specimen size of σ_0.2 and δ.

• Korean Journal of Audiology
• /
• v.23 no.3
• /
• pp.129-134
• /
• 2019

Background and Objectives: Sine a self-reported questionnaire for hearing-impaired listeners is not available by Malay language yet, it is important to develop or translate any available existing questionnaires. The aim of this study was to translate, adapt and validate the Hearing Handicap Inventory for Adult (HHIA) to be used by the audiologist among the hearing-impaired population in Malaysia. Subjects and Methods: The HHIAs was translated to Malay language using forward-backward translation techniques by four-panellists (two for each level). The translated HHIA was then reconciled and harmonized for cultural aspects and content of the questionnaire by the researchers and two expert panels before being pilot-tested among 10 hearing-impaired patients. Questionnaire validation was conducted among 80 adults with a hearing loss to calculate for Cronbach's α (internal reliability), Spearman's correlation (inter-item correlation) and factor analysis. Results: None of the translated items were removed from the scale. The overall Cronbach's α was 0.964; 0.927 and 0.934 for both social and emotional subscales, respectively. The factor analysis (force-concept inventory) demonstrated a two-structure with a strong correlation between all items in either component 1 or 2, that resembled the original scale. The Mann-Whitney test revealed significantly higher scores for those adults with a hearing loss than those adults with normal hearing. Conclusions: The Malay HHIA has been successfully translated and validated for the purpose of determining the psychosocial aspects of adults with hearing loss in the local population.

• Steel and Composite Structures
• /
• v.49 no.4
• /
• pp.441-456
• /
• 2023

Aiming at the development trend of light weight and high strength of engineering structures, this paper experimentally investigated the seismic performance of circular-in-square high-strength concrete-filled double skin steel tubular (HCFDST) stub columns with out-of-code width-to-thickness (B/t) ratios. Typical failure mode of HCFDST stub columns appeared with the infill material crushing, steel fracture and local buckling of outer tubes as well as the inner buckling of inner tubes. Subsequently, the detailed analysis on hysteretic curves, skeleton curves and ductility, energy dissipation, stiffness degradation and lateral force reduction was conducted to reflect the influences of hollow ratios, axial compression ratios and infill types, e.g., increasing hollow ratio from 0.54 to 0.68 and 0.82 made a slight effect on bearing capacity compared to the ductility coefficients; the higher axial compression ratio (e.g., 0.3 versus 0.1) significantly reduced the average bearing capacity and ductility; the HCFDST column SCFST-6 filled with concrete obviously displayed the larger initial secant stiffness with a percentage 34.20% than the column SCFST-2 using engineered cementitious composite (ECC); increasing hollow ratios, axial compression ratios could accelerate the drop speed of stiffness degradation. The out-of-code HCFDST stub columns with reasonable design could behave favorable hysteretic performance. A theoretical model considering the tensile strength effect of ECC was thereafter established and verified to predict the moment-resisting capacity of HCFDST columns using ECC. The reported research on circular-in-square HCFDST stub columns can provide significant references to the structural application and design.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.27 no.1
• /
• pp.55-70
• /
• 2024

The loss of biodiversity poses a significant threat not only to business sustainability and investment risk but also to societal well-being. Nature serves as a crucial driver for long-term business viability and economic prosperity. The Task Force on Nature-related Financial Disclosures (TNFD), established in September 2023, mandates that companies assess and disclose their impacts on nature. Despite this, many businesses lack a full understanding of their reliance on and impact upon natural capital and ecosystem services, leading to insufficient disclosures. This study evaluates the applicability of TNFD's assessment methodologies and indicators within a domestic context, highlighting the condition of nature and ecosystem services, and exploring potential synergies with national biodiversity policies. Our analysis suggests that TNFD necessitates a unique approach to the spatial and temporal data and methodologies traditionally employed in environmental impact assessments. This includes assessing the reciprocal influences of corporate activities on natural capital and ecosystem services via the LEAP framework. Moreover, in industries where the choice of specific indicators depends on unique sectoral traits, developing a standardized strategy for data and assessment indicators-adapted to local conditions-is crucial due to the variability in the availability of assessment tools and data. The proactive engagement of the private sector in ecosystem restoration projects is particularly promising for contributing towards national biodiversity objectives. Although TNFD is in its nascent phase, its global adoption by numerous companies signifies its potential impact. Successful implementation of TNFD is anticipated to deepen businesses' and financial institutions' understanding of natural capital and ecosystem services, thereby reinforcing their commitment to sustainable development.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.47 no.1
• /
• pp.41-50
• /
• 2024

Korea is facing a significant problem with historically low fertility rates, which is becoming a major social issue affecting the economy, labor force, and national security. This study analyzes the factors contributing to the regional gap in fertility rates and derives policy implications. The government and local authorities are implementing a range of policies to address the issue of low fertility. To establish an effective strategy, it is essential to identify the primary factors that contribute to regional disparities. This study identifies these factors and explores policy implications through machine learning and explainable artificial intelligence. The study also examines the influence of media and public opinion on childbirth in Korea by incorporating news and online community sentiment, as well as sentiment fear indices, as independent variables. To establish the relationship between regional fertility rates and factors, the study employs four machine learning models: multiple linear regression, XGBoost, Random Forest, and Support Vector Regression. Support Vector Regression, XGBoost, and Random Forest significantly outperform linear regression, highlighting the importance of machine learning models in explaining non-linear relationships with numerous variables. A factor analysis using SHAP is then conducted. The unemployment rate, Regional Gross Domestic Product per Capita, Women's Participation in Economic Activities, Number of Crimes Committed, Average Age of First Marriage, and Private Education Expenses significantly impact regional fertility rates. However, the degree of impact of the factors affecting fertility may vary by region, suggesting the need for policies tailored to the characteristics of each region, not just an overall ranking of factors.

• Safety and Health at Work
• /
• v.15 no.1
• /
• pp.87-95
• /
• 2024

Background: This study focuses on assessing occupational risk for the health hazards encountered during maintenance works (MW) in semiconductor fabrication (FAB) facilities. Objectives: The objectives of this study include: 1) identifying the primary health hazards during MW in semiconductor FAB facilities; 2) reviewing the methods used in evaluating the likelihood and severity of health hazards through occupational health risk assessment (OHRA); and 3) suggesting variables for the categorization of likelihood of exposures to health hazards and the severity of health effects associated with MW in FAB facilities. Methods: A literature review was undertaken on OHRA methodology and health hazards resulting from MW in FAB facilities. Based on this review, approaches for categorizing the exposure to health hazards and the severity of health effects related to MW were recommended. Results: Maintenance workers in FAB facilities face exposure to hazards such as debris, machinery entanglement, and airborne particles laden with various chemical components. The level of engineering and administrative control measures is suggested to assess the likelihood of simultaneous chemical and dust exposure. Qualitative key factors for mixed exposure estimation during MW include the presence of safe operational protocols, the use of air-jet machines, the presence and effectiveness of local exhaust ventilation system, chamber post-purge and cooling, and proper respirator use. Using the risk (R) and hazard (H) codes of the Globally Harmonized System alongside carcinogenic, mutagenic, or reprotoxic classifications aid in categorizing health effect severity for OHRA. Conclusion: Further research is needed to apply our proposed variables in OHRA for MW in FAB facilities and subsequently validate the findings.