• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.11-12
• /
• 2015

This paper describes development of a system that can create a hazard map by residents in order to prepare for disaster in daily life. This system make a hazard map by displaying the community-based disaster information on the map. Residents register information about the spot (a disaster type, a risk level, a photo, comments, positional information) that can be dangerous in case disaster. We think that residents can share information while having fan and increase disaster prevention consciousness by resident participation activities.

• KIEAE Journal
• /
• v.4 no.3
• /
• pp.87-94
• /
• 2004

The purpose of this study is to improve thermal environment of telecommunication equipment rooms that hold TDX-10, TDX-100, 5ESS-2000, PCM of the latest telecommunication equipment. Analysis program is used the commercial CFD code, Star-CD and DOE-2.1E. The result has been compared by the energy consumption and the temperature contour at the 1 m height of room for each case. Different methods such as the relocation of the existing air-conditioner, the inflow of the ambient air into room, the installation of the forced fan and the cooling system equipment of the duct-connection type have been used to test for improvement of thermal environment. The analysis shows that most efficient method is the inflow of the ambient air into room but auxiliary equipment should be needed to prevent the local thermal spot.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.11
• /
• pp.1072-1078
• /
• 2001

The real time optimal control algorithm of the DDC controller for chilled water and supply air temperature set-point of heating, ventilating, air-conditioning and refrigeration systems has been researched for minimization of the total power which is consumed by the chiller, chilled water pump and air handing unit fan. The study has been done by using TRNSYS program in order to analyze the central cooling system in terms of the environmental variables such as indoor cooling lead and wet-bulb temperature. This optimal control alogorithm saves more energy and is suitable for real time on-line control in comparison with conventional method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.2
• /
• pp.103-108
• /
• 2009

Local exhaust system used in toilet and cooking place of low-rise public house installed roof ventilator at terminal of stack. There are many high riser public houses in Korea. These buildings were not viewed as being major contributors to exhaust pollutants producted in indoor. It was because many engineers thought that exhaust in high riser public house depends on stack effect. But Neutral pressure level represents in a terminal of stack with air tightness for the best exhaust efficiency. Thereby, lower floors have the worst indoor air quality. This paper focuses mainly on the exhaust efficiency improved by roof fan with motor installed in high riser public house. It is observed there is higher exhaust efficiency than the existing natural roof ventilator.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.144-154
• /
• 2013

This paper proposes a new super-resolution algorithm where sharpness enhancement is merged in order to improve overall visual quality of up-scaled images. In the learning stage, multiple dictionaries are generated according to sharpness strength, and a proper dictionary among those dictionaries is selected to adapt to each patch in the inference stage. Also, additional post-processing suppresses boosting of artifacts in input low-resolution images during the inference stage. Experimental results that the proposed algorithm provides 0.3 higher CPBD than the bi-cubic and 0.1 higher CPBD than Song's and Fan's algorithms. Also, we can observe that the proposed algorithm shows better quality in textures and edges than the previous works. Finally, the proposed algorithm has a merit in terms of computational complexity because it requires the memory of only 17% in comparison with the previous work.

• Korean Journal of Food Science and Technology
• /
• v.14 no.3
• /
• pp.271-275
• /
• 1982

Low-temperature in-bin drying with high-moisture paddy were demonstrated and studied under local autumn weather condition. Paddy with the initial moisture content of about 24.5 percent in the steel storage bin(diameter: 3 m, height: 3.17 m) was uniformly dried to about 15 percent by continuous blowing of ambient air (average temperature: $10.5^{\circ}C$, RH: 58 percent) in the middle part of October. The amount of grain and grain height were 4.19 M/T and 90 cm, respectively. Total fan operation time was 288 hours and airflow rate was $4.81\;m^3/min/m^3$ of paddy. Mean drying rate was 0.03 percent per hour and enery requirement for fan operation was 0.38 KWh per kg water removed.

• Smart Structures and Systems
• /
• v.18 no.3
• /
• pp.501-523
• /
• 2016

Electromechanical impedance (EMI) based structural health monitoring is performed by measuring the variation in the impedance due to the structural local damage. The impedance signals are acquired from the piezoelectric patches that are bonded on the structural surface. The impedance variation, which is directly related to the mechanical properties of the structure, indicates the presence of local structural damage. Two traditional EMI-based damage detection methods are based on calculating the difference between the measured impedance signals in the frequency domain from the baseline and the current structures. In this paper, a new structural damage detection approach by analyzing the time domain impedance responses is proposed. The measured time domain responses from the piezoelectric transducers will be used for analysis. With the use of the Time Frequency Autoregressive Moving Average (TFARMA) model, a damage index based on Singular Value Decomposition (SVD) is defined to identify the existence of the structural local damage. Experimental studies on a space steel truss bridge model in the laboratory are conducted to verify the proposed approach. Four piezoelectric transducers are attached at different locations and excited by a sweep-frequency signal. The impedance responses at different locations are analyzed with TFARMA model to investigate the effectiveness and performance of the proposed approach. The results demonstrate that the proposed approach is very sensitive and robust in detecting the bolt damage in the gusset plates of steel truss bridges.

• Structural Engineering and Mechanics
• /
• v.70 no.2
• /
• pp.143-152
• /
• 2019

In this study, stochastic responses of a cable-stayed bridge subjected to the spatially varying earthquake ground motion are investigated for variable local soil cases and wave velocities. Quincy Bay-view cable-stayed bridge built on the Mississippi River in Illinois, USA selected as a numerical example. The bridge is composed of two H-shaped concrete towers, double plane fan type cables and a composite concrete-steel girder deck. The spatial variability of the ground motion is considered with the coherency function, which is represented by the components of incoherence, wave-passage and site-response effects. The incoherence effect is investigated by considering Harichandran and Vanmarcke model, the site-response effect is outlined by using hard, medium and soft soil types, and the wave-passage effect is taken into account by using 1000, 600 and 200 m/s wave velocities for the hard, medium and soft soils, respectively. Mean of maximum response values obtained from the analyses are compared with those of the specific cases of the ground motion model. It is concluded that the obtained results from the bridge model increase as the differences between local soil conditions cases of the bridge supports change from firm to soft. Moreover, the variation of the wave velocity has important effects on the responses of the deck and towers as compared with those of the travelling constant wave velocity case. In addition, the variability of the ground motions should be considered in the analysis of long span cable-stayed bridges to obtain more accurate results in calculating the bridge responses.

• Asia Marketing Journal
• /
• v.17 no.4
• /
• pp.63-88
• /
• 2016

K-Pop is hugely promoted offline/online in East Asia, while efforts to promote it elsewhere are kept to a minimum. Whilst addressing the role of digital marketing in the promotion of K-Pop in the Brazilian music industry this study aims to demonstrate that K-pop will provide its audience with a unique and engaging experience if it thinks globally and acts locally in its marketing and communication strategies. A survey of K-Pop's world fan base was carried out online with 1,074 fans to determine the validity of the hypothesis. The results have demonstrated the need to adapt global and intercultural strategies to local markets with increasing brand awareness through utilizing digital marketing. For example, to increase K-Pop's popularity and market share in Brazil, it is not required to sing in Brazilian Portuguese, contrary to what might be perceived but fully singing in English would help breaking into the market dominated by domestic music as songs would have a higher probability to be included in the international soundtrack of a Brazilian telenovela and promote the K-Pop artist not only across Brazil but also give the artist exposure in all the markets the Brazilian telenovela is exported to, opening an entry door to those markets. K-Pop audience segmentation and psychographic profiling is crucial to the understanding of each market's consumer's preferences, likes, dislikes and their buying habits as it was proven through Brazil's digital media, social media, digital music market and K-Pop market analysis within the global context of the study. It should be also considered that brand extensions are not standard everywhere and that there are cultures where different product categories are not directly associated with its main corporate owner which requires extensive local market knowledge to succeed. The primary and secondary data research that we conducted for this study intended to demonstrate that K-Pop can be successful in Brazil and in Latin America and increase their local and regional market share if digital marketing and communication strategies are tailored to each individual market.

• Journal of the Korean Institute of Gas
• /
• v.7 no.1 s.18
• /
• pp.24-27
• /
• 2003

In this paper it was investigated 15 heaters of CDU plant heater, NCC plant heater, CO plant heater, Aromatic plant heater and so on while running in our country. It was also analysed the standard of operation procedure, the action in alarm, the interlock system, the operating situation of the interlock by-pass and major accident about the heater and so on. This paper presents the installation of the on-line monitoring, the additional installation of the local pressure gauge and temperature gauge, the check in starting operation,'the management of the interlock by-pass, the change of manufacturer causing the disorder of instrument sensor, the management method of DCS alarm for methods of the interlock prevention and facilities improvement. It was few information about the heater interlock in the inside and outside of the country We mainly have studied with reflecting the opinion of the operator and manager on site, the sheet of process trouble and operation procedure and so on. we think that the accident relating to the interlock will significantly reduce if the companies apply the conclusion of this study(i.e. methods of the interlock prevention and facilities improvement).