• Journal of the Korean Solar Energy Society
• /
• v.37 no.6
• /
• pp.59-68
• /
• 2017

In accordance with the policy of local government, the large scale of wind farms have been installed in Jeju power system. However, The intermittent characteristics of wind power output may cause grid voltage and frequency variation, especially in weak power system. One of the solution to solve this problem is installation of Energy storage system (ESS). In this case, the ESS will regulate the active power generated from wind farm to mitigate fluctuation. Actually, the local government of Jeju island constructed ESS connected to Hangwon wind turbine in 2016. From this point, this paper analyzes requirement capacity of ESS to mitigate wind power fluctuation based on measured data from Hangwon wind turbine and ESS. The simulation results will be carried out by Matlab program.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.853-856
• /
• 2012

모바일 디바이스의 대중화와 SNS(Social Networking Service)의 발전은 각 개인이 데이터와 정보를 생성하는 Web 2.0 의 페러다임을 앞당겼으며 최근 SNS 서비스를 통하여 새로운 형태의 커뮤니케이션 형태가 생성되었다. 이러한 커뮤니케이션 도구를 이용하는 유저는 대부분 ID 와 Password를 기반으로 사용자를 인증하여 서비스를 제공받는다. 이와 같은 서비스에서는 각 사용자의 정보자체보다 사용자의 사회적 위치와 사용자간의 관계를 이용한 보안사고가 우려된다. 근래의 ID/Password로 인증하는 방식의 웹서비스 또는 정보서비스들은 대부분 개인 PC, 스마트폰, 업무 PC 등에서 접근하는 추세이며, 임의적 장소에서 임의의 기기로 해당 서비스에 접근하는 양상은 과거에 비하여 감소하는 추세다. 이 같은 추세에 따라, 주로 사용하는 기기에 HTML5의 keygen과 Web-Storage 기능을 사용하여 암호화된 Key를 생성하고 저장하여 ID 와 Password가 노출되어도 해당 기기가 아니면 인증되지 않는 시스템을 구현 할 수 있으며 타 기기의 경우 일회성을 갖는 인증 방식을 사용하여, 기존 보다 안전한 인증 시스템을 적은 비용으로 구축 할 수 있다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.3
• /
• pp.354-363
• /
• 1997

The purpose of the present work is to show the best thermal storage material and the sensitivity of the parameters on the thermal performance by experimentally investigating the effects of the parameters on the thermal performance of the spherical capsule system using paraffins superior to the commercial one. The paraffins were n-Tetradecane and the mixture of n-Tetradecane 40% and n-Hexadecane 60%. The experimental parameters were the Reynolds number of 8, 12, and 16 and the inlet temperature of-7, -4, -1, and $2^{\circ}C$. The charging and the discharing time, the dimensionless thermal storage amount, and the averge heat transfer coefficient in the tank were obtained by utilizing the local temperature variation in the tank. The local charging and discharging time in the tank was axially and radially different a lot. The effects of the inlet temperature on the charging and the discharging time were larger during the charging process than during the discharging process, but the effects of the Reynolds number on the charging and the discharging time were in reverse order. The paraffins were better by 11~72% than the water with the inorganic material in the charging time aspect, but no difference in the discharging time aspect. The effects of the Reynolds number on the dimensionless thermal storage amount were smaller than the effects of the inlet temperature during the charging process, but in reverse order during the discharging process within the working range of the experimental parameters. The effects of the inlet temperature and the Reynolds number on the average heat transfer coefficient were larger during the discharging process than during the charging process. The average heat transfer coefficient for the paraffins was larger by 40% maximum than that for the commercial material during the charing and the discharging process.

• Journal of the Korean Professional Engineers Association
• /
• v.3 no.10
• /
• pp.7-17
• /
• 1970

Fourteen reservoirs maintained by the local land improvement associations in the province of Chullabuk-Do and 20 reservoirs maintained by those in the province of Chullanam-Do, were surveyed in connection with a correction between storage capacity and sediment deposit. In addition to this survey, 3347 of small scale reservoirs, that lie scattered around in the above mentioned two provinces were investigated by using existing records pertaining to storage capacity in the office of City and Country, respectively. According to this inrestigation. the following conclusions are derived. 1. A sediment deposition rate is high, being about 10.63m$^3$/ha of drainage area, and resulting in the average decrease of storage capacity by 27.5%. This high rate of deposition could be mainly attributed to the severe denudation of forests due to disorderly cuttings of trees. Especially, in small scale reservoirs, an original average design storage depth of 197mm in irrigation water depth is decreased to about 140mm. 2. An average unit storage depth of 325.6mm as the time of initial construction is decreased to 226mm at present. This phenomena causes a greater shortage of gation water, since it was assumed that original storage quantity itself was already in short.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.5
• /
• pp.909-937
• /
• 2011

Energy efficiency is one of the most critical issues in the design of wireless sensor networks. In object-tracking sensor networks, the data storage and query processing should be energy-conserving by decreasing the message complexity. In this paper, a Prediction-based Energy-conserving Approximate StoragE schema (P-EASE) is proposed, which can reduce the query error of EASE by changing its approximate area and adopting predicting model without increasing the cost. In addition, focusing on reducing the unnecessary querying messages, P-EASE enables an optimal query algorithm to taking into consideration to query the proper storage node, i.e., the nearer storage node of the centric storage node and local storage node. The theoretical analysis illuminates the correctness and efficiency of the P-EASE. Simulation experiments are conducted under semi-random walk and random waypoint mobility. Compared to EASE, P-EASE performs better at the query error, message complexity, total energy consumption and hotspot energy consumption. Results have shown that P-EASE is more energy-conserving and has higher location precision than EASE.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.7
• /
• pp.2286-2304
• /
• 2022

Blockchain is a distributed ledger that combines technologies such as cryptography, consensus mechanism, peer-to-peer transmission, and time stamping. The rapid development of blockchain has attracted attention from all walks of life, but storage scalability issues have hindered the application of blockchain. In this paper, a scalable blockchain storage model based on Distributed Hash Table (DHT) and the InterPlanetary File System (IPFS) was proposed. This paper introduces the current research status of the scalable blockchain storage model, as well as the basic principles of DHT and the InterPlanetary File System. The model construction and workflow are explained in detail. At the same time, the DHT network construction mechanism, block heat identification mechanism, new node initialization mechanism, and block data read and write mechanism in the model are described in detail. Experimental results show that this model can reduce the storage burden of nodes, and at the same time, the blockchain network can accommodate more local blocks under the same block height.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2604-2612
• /
• 2023

Spent nuclear fuel and long-lived radioactive waste must be carefully handled before disposing them off to a geological repository. After the pre-storage period in water pools, spent nuclear fuel is stored in casks, which are widely used for interim storage. Interim storage in casks is very important part in the whole cycle of nuclear energy generation. This paper presents the results of the numerical study that was performed to evaluate the thermal behavior of a metal-concrete CONSTOR RBMK-1500 cask loaded with spent nuclear fuel and placed in an open type interim storage facility which is under fire conditions (steady-state, fire, post-fire). The modelling was performed using the ANSYS Fluent code. Also, a local sensitivity analysis of thermal parameters on temperature variation was performed. The analysis demonstrated that the maximum increase in the fuel load temperatures is about 10 ℃ and 8 ℃ for 30 min 800 ℃ and 60 min 600 ℃ fires respectively. Therefore, during the fire and the post-fire periods, the fuel load temperatures did not exceed the 300 ℃ limiting temperature set for an RBMK SNF cladding for long-term storage. This ensures that fire accident does not cause overheating of fuel rods in a cask.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.32-38
• /
• 2015

In this paper, we propose a smallcell local caching algorithm under user's context in smallcell environment. The proposed system reduces traffic to core network and the network cost, but increases it's performance. The proposed algorithm precache suitable files using smallcell's regional characteristics and target's personality. It can adjusts a storage allocation to make effective usage of our limited cache storage capacity. In order to evaluate the performance of the proposed cache algorithm, we define the cache efficiency, the decrement of core network traffic. The simulation results show that the proposed algorithm can improve performance by about 200% compared to existing web cache scheme.

• Proceedings of the Zoological Society Korea Conference
• /
• 2000.04a
• /
• pp.88.2-88
• /
• 2000

No Abstract, See Full Text

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.10a
• /
• pp.129-136
• /
• 1994

Spherical storage tank for chemical plant is analyzed for the loads and their combinations in accordance with Section Ⅷ, Division 2 of the ASME Boiler and Pressure Vessel Code. Design Analysis of Butene storage tank is carried out by utilizing 3-dimensional plate and beam elements of a general purpose finite element program. Two separate 3-D finite element models are used; one for the global analysis of the entire spherical storage tank, the other for the local analysis of junction part and its vicinity of shell-to-supporting structures. The analysis is focused on the equator plate in the shell and the junction part of shell-to-supporting structures.