• Steel and Composite Structures
• /
• v.35 no.5
• /
• pp.701-715
• /
• 2020

Steel storage racks are lightweight structures, made of thin-walled cold-formed members, whose behaviour is remarkably influenced by local, distortional and overall buckling phenomena, frequently mutually combined. In addition, the need of an easy and rapid erection and reconfiguration of the skeleton frame usually entails the presence of regular perforations along the length of the vertical elements (uprights). Holes and slots strongly influence their behaviour, whose prediction is however of paramount importance to guarantee an efficient design and a safe use of racks. This paper focuses on the behaviour of isolated uprights subjected to both axial load and bending moments, differing for the cross-section geometry and for the regular perforation systems. According to the European standards for routine design, four alternatives to evaluate the bending moment-axial load resisting domains are shortly discussed and critically compared in terms of member load carrying capacity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1545-1551
• /
• 2002

The optical storage device has recently experienced significant improvement, especially for the aspects of high capacity and fast transfer rate. However, it is necessary to study a new shape of air bearing surface for the rotary type actuator because the optical storage device has the lower access time than that of HDD (Hard Disk Drives). In this study, we proposed the air bearing shape by using SA (Simulated Annealing) algorithm which is very effective to achieve the global optimum instead of many local optimums. The objective of optimization is to minimize the deviation in flying height from a target value 100nm. In addition, the pitch and roll angle should be maintained within the operation limits.

• IE interfaces
• /
• v.11 no.3
• /
• pp.23-40
• /
• 1998

In this paper, a method to determine the optimal configuration of operating policies in an integrated-automated manufacturing system using the Taguchi method and computer simulation experiments is presented. An integrated-automated manufacturing system called direct-input-output manufacturing system(DIOMS) is described. We only consider the operational aspect of the DIOMS. Four operating policies including input sequencing control, dispatching rule for the storage/retrieval(S/R) machine, machine center-based part type selection rule, and storage assignment policy are treated as design factors. The number of machine centers, the number of part types, demand rate, processing time and the rate of each part type, vertical and horizontal speed of the S/R machine, and the size of a local buffer in the machine centers are considered as noise factors in generating various manufacturing system environment. For the performance characteristics, mean flow time and throughput are adopted. A robust design experiment with inner and outer orthogonal arrays are conducted by computer simulation, and an optimal configuration of operating policies is presented which consists of a combination of the level of each design factor. The validity of the optimal configurations is investigated by comparing their signal-to-noise ratios with those obtained with full factorial designs.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.153-160
• /
• 2010

This paper deals with the topology optimized design of the riser support structures for floating production storage and offloading units (FPSOs) under global and local loading conditions. For a preliminary study and validation of the numerical approach, a simplified plate under static loading is first evaluated with the representative topology optimization methods, the Homogenization Design Method (HDM) and Density Method (DM) or Simple Isotropic Material with Penalization (SIMP). In the context of the corresponding riser support structures, the design problem is formulated such that structure shapes based on design domain variables are determined by minimizing the compliance subject to a mass target, considering the stress criterion. An initial design model is generated based on an actual FPSO riser support configuration. The topology optimization results present improved design performances under various loading conditions, while staying within the allowable limit of the offshore area.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.2
• /
• pp.33-43
• /
• 2012

Digital signage is referred to as a smart electronic display system that delivers multimedia-based information and advertisements to customers. Typically, the digital signage starts its playback after downloading a list of multimedia contents from network storage to its local disk. However, a way of downloading the entire contents before its playback entails a long initial delay time. In this paper, we formulate a problem of the initial delay time and provide a solution to compute a minimally demanded initial delay time according to a given network bandwidth and qualities/sizes of the multimedia contents. In addition, we analyze the performance of the proposed solution with various multimedia contents on digital signage.

• Korean Journal of Plant Resources
• /
• v.10 no.3
• /
• pp.213-220
• /
• 1997

The present study has been undertaken to characterize availability of citrus as a medicinal plant with antineoplastic property. The crude extracts from 40 species of fruits with 12 species of the local Citrus in Cheju island were evaluated on their potential activities against mouse P388 lymphocytic leukaemia in vitro. The percent cytotoxicity varied from 25.40 to 97.94% at a concentration of $100{\mu}g/mL$. Among 40 spp., 8 species showed high toxicity more than 90% against P388 cells and Cheongkyool(C. nippokoreana) exhibited the most cytotoxicity as 97.94%($IC_{50}=20.2{\mu}g/mL$). Nine varieties of C. junos were showed insiginicant cytotoxicity. In trifoliate orange, immature fruit was stronger than mature and peel extract showed higher cytotoxicity($IC_{50}=18{\mu}g/mL$) than the other tissues. Hexane fraction from methanol(MeOH) extract of trifoliate orange showed highly significant inhibition of cell growth($IC_{50}=3.9{\mu}g/mL$). In addition, its cytotoxicity increased remarkably from 3.95 to $0.40{\mu}g/mL$ as exposure time legthened. Cytotoxic activities of crude extracts were decreased considerably during a six months storage period. It was apparent that there is considerable variation in cytotoxicity, depending upon species, maturity and storage time of extracts. There was no meaningful cytotoxic difference between archicitrus and metacitrus in the genus Citrus.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.786-794
• /
• 2015

In this paper, a new power control strategy for the bipolar-type low voltage direct current (LVDC) distribution system is being proposed. The dc distribution system is considered as an innovative system according to the increase of dc loads and dc output type distribution energy resources (DERs) such as photovoltaic (PV) systems and energy storage systems (ESS). Since the dc distribution system has many advantages such as feasible connection of DERs, reduction of conversion losses between dc output sources and loads, no reactive power issues, it is very suitable solution for new type buildings and residences interfaced with DERs and ESSs. In the bipolar-type, if it has each grid-interfaced converter, both sides (upper, lower-side) can be operated individually or collectively. A complementary power control strategy using two ESSs in both sides for effective and reliable operation is proposed in this paper. Detailed power control methods of the host controller and local controllers are described. To verify the performances of the proposed control strategy, simulation analysis using PSCAD/EMTDC is being performed where the results show that the proposed strategy provides efficient operations and can be applied to the bipolar-type dc distribution system.

• Korean Institute of Interior Design Journal
• /
• v.18 no.3
• /
• pp.57-65
• /
• 2009

Library is a communication channel between book and human. Specially public library furniture plays an important role from every aspect in information materials and users, among users and in relationship between library managers and users. This study defined library furniture as a communication channel which connects library materials and users and was based on 35 local libraries and 12 overseas libraries. The author studied major elements and characteristics which constitute communication types among storage furniture, furniture in reading areas and furniture in digital reading area. The followings are the results from the study. First, storage furniture should be designed by reflecting characteristics of library materials and for effective delivering to the users. Therefore utmost communication can be made by searching for various designs in book-shelves and effective manner of display. Secondly, furniture in reading areas should support various users' needs from customized browsing to long hour studying and there should be properly supported for private space and correspondent reading postures. The third, there are needs for design conditions to support privacy and for comfort from long hour reading and mobility out of posture change in digital reading areas. The fourth, there should be ergonomically designed furniture plan and surroundings in public library which can boost various reading postures. Also furniture plan should be done by considering users' bodies and eyes orientations which can result in improved power of concentration.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.6
• /
• pp.577-586
• /
• 2011

This paper describes the development of hardware simulator for the operation analysis of DC microgrid. The hardware simulator consists of several distributed power sources such as a wind power generation, solar power and fuel cell, and two energy storages such as a supercapacitor and battery. The main controller which performs a role of energy management and state monitoring is connected with the local controller in each power source and storage through ethernet-based communication link. The developed hardware simulator can be utilized to analyze the performance DC microgrid with practical manner.

• Journal of Information Processing Systems
• /
• v.8 no.4
• /
• pp.555-566
• /
• 2012

The cloud environment makes it possible to analyze large data sets in a scalable computing infrastructure. In the bioinformatics field, the applications are composed of the complex workflow tasks, which require huge data storage as well as a computing-intensive parallel workload. Many approaches have been introduced in distributed solutions. However, they focus on static resource provisioning with a batch-processing scheme in a local computing farm and data storage. In the case of a large-scale workflow system, it is inevitable and valuable to outsource the entire or a part of their tasks to public clouds for reducing resource costs. The problems, however, occurred at the transfer time for huge dataset as well as there being an unbalanced completion time of different problem sizes. In this paper, we propose an adaptive resource-provisioning scheme that includes run-time data distribution and collection services for hiding the data transfer time. The proposed adaptive resource-provisioning scheme optimizes the allocation ratio of computing elements to the different datasets in order to minimize the total makespan under resource constraints. We conducted the experiments with a well-known sequence alignment algorithm and the results showed that the proposed scheme is efficient for the cloud environment.