Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

The Optimal Design of Air Bearing Sliders of Optical Disk Drives by Using Simulated Annealing Technique

SA 기법을 이용한 광디스크 드라이브 공기베어링 슬라이더의 최적설계

  • 장혁 (한국기술교육대학원 대학원) ;
  • 김현기 (건국대학교 대학원) ;
  • 김광선 (한국기술교육대학교 메카트로닉스공학부) ;
  • 임경화 (한국기술교육대학교 제어시스템공학과)
  • Published : 2002.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

The optical storage device has recently experienced significant improvement, especially for the aspects of high capacity and fast transfer rate. However, it is necessary to study a new shape of air bearing surface for the rotary type actuator because the optical storage device has the lower access time than that of HDD (Hard Disk Drives). In this study, we proposed the air bearing shape by using SA (Simulated Annealing) algorithm which is very effective to achieve the global optimum instead of many local optimums. The objective of optimization is to minimize the deviation in flying height from a target value 100nm. In addition, the pitch and roll angle should be maintained within the operation limits.

Keywords

References

  1. Min, D. K., Frees, G. M. and Gompertz, R. S., 1990, 'Tracking Dynamics of Read/Write Head Suspension in High-Performance Small Form Factor Rigid Disk Drivers,' ASME Journal of Vibration and Acoustics, Vol. 112, pp. 33-39 https://doi.org/10.1115/1.2930095
  2. Kim Su Hwan, Shin Su Yong, Wang Ji Nam, 1995, 'The Study on the ultra-high speed optical disk driver based on pivot-arm tracking method using fiber optical pick-up,' Proceeding of Korean Society of Precision Engineering spring Annual Meeting, pp. 444-448
  3. Son, D. S., Shim, J. w., Seo, H. I., Rim , K. H. and Lee, W. Y, 2000, 'A Study on the Design of the Micro-Mirror Considering the Squeeze Effects of Gas Film,' Journal of the Microelectronics and Packaging Society, Vol. 7 , No.1, pp. 29-34
  4. Kim Hyun Ki, Jang Hyuk, Kim Kwang Sun, Lim Kyong Hwa and Jeong Tae Gun, 2000, 'Shape Sensitivity analysis for the Optimal Design of Air Bearing Sliders of Optical Disk Drives,' Proceeding of the Korean Society for Noise and vibration Engineering Chonan Korea, November 2000, pp. 742-747
  5. O'hara, M. A., and Bogy, D. B, 1995, 'Robust Design Optimization Techniques for Ultra-Low Flying Slider,' IEEE Transactions on Magnetics, Vol. 31, No. 6, pp. 2955-2957 https://doi.org/10.1109/20.490201
  6. O'hara, M. A., Hu, Y, and Bogy, D. B., 1996, 'Effects of Slider Sensitivity Optimization,' IEEE Transactions on Magnetics, Vol. 32, No.5, pp. 3744-3746 https://doi.org/10.1109/20.538823
  7. Hamrock B. J., 1994, Fundamentals of Fluid Film Lubrication, McGraw-Hill. pp. 147-156
  8. Ruiz O.J. and Bogy D. B., 1988, 'A Comparison of Slider Bearing Simulations Using Different Models,' IEEE Transactions on Magnetics, MAG-25, pp. 2754-2756 https://doi.org/10.1109/20.92235
  9. Ruiz, O.J. and Bogy, D. B., 1995, 'A Numerical Simulation for Static Dynamic Simulation of Subambient Pressure Shaped Rail Sliders,' ASME Journal of Tribology, Vol. 117, pp. 36-46 https://doi.org/10.1115/1.2830604
  10. Metropolis, N., Rosenbluth, A.W., Rosenbluth, M. N., Teller, A.H. and Teller, E., 1953, 'Equation of State Calculation by Fast Computing Machines,' Journal of Chem. Phy. 21(6), pp. 1087-1092 https://doi.org/10.1063/1.1699114
  11. Kirkpatrick, S., Gelatt, C.D. Jr., and Vecchi, M.P., 1983, 'Optimization by Simulated Annealing,' Science 220(4598), pp. 671-680 https://doi.org/10.1126/science.220.4598.671
  12. Lundy, M. and Mees, A., 1986, 'Convergence of an Annealing Algorithm,' Mathematical Programing, Vol 34, pp. 111-124 https://doi.org/10.1007/BF01582166
  13. Geman, S. and Geman, D., 1984, 'Stochastic Relaxation, Gibbs Distribution and the Bayesian Restoration in Images,' IEEE Transaction. Patt. Anal. Mac. Int 6(6), pp. 721-741 https://doi.org/10.1109/TPAMI.1984.4767596