• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.179-190
• /
• 2010

This paper describes a new stochastic heuristic algorithm in engineering problem optimization especially in power system applications. An improved particle swarm optimization (PSO) called adaptive particle swarm optimization (APSO), mixed with simulated annealing (SA), is introduced and referred to as APSO-SA. This algorithm uses a novel PSO algorithm (APSO) to increase the convergence rate and incorporate the ability of SA to avoid being trapped in a local optimum. The APSO-SA algorithm efficiency is verified using some benchmark functions. This paper presents the application of APSO-SA to find the optimal location, type and size of flexible AC transmission system devices. Two types of FACTS devices, the thyristor controlled series capacitor (TCSC) and the static VAR compensator (SVC), are considered. The main objectives of the presented method are increasing the voltage stability index and over load factor, decreasing the cost of investment and total real power losses in the power system. In this regard, two cases are considered: single-type devices (same type of FACTS devices) and multi-type devices (combination of TCSC, SVC). Using the proposed method, the locations, type and sizes of FACTS devices are obtained to reach the optimal objective function. The APSO-SA is used to solve the above non.linear programming optimization problem for better accuracy and fast convergence and its results are compared with results of conventional PSO. The presented method expands the search space, improves performance and accelerates to the speed convergence, in comparison with the conventional PSO algorithm. The optimization results are compared with the standard PSO method. This comparison confirms the efficiency and validity of the proposed method. The proposed approach is examined and tested on IEEE 14 bus systems by MATLAB software. Numerical results demonstrate that the APSO-SA is fast and has a much lower computational cost.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1093-1102
• /
• 2010

Principal component analysis (PCA) is a well-known method for dimension reduction while maintaining most of the variation in data. Although PCA has been applied to many areas successfully, it is sensitive to outliers. Several variants of PCA have been proposed to resolve the problem and, among the variants, robust fuzzy PCA (RF-PCA) demonstrated promising results. RF-PCA uses fuzzy memberships to reduce the noise sensitivity. However, there are also problems in RF-PCA and the convergence property is one of them. RF-PCA uses two different objective functions to update memberships and principal components, which is the main reason of the lack of convergence property. The difference between two functions also slows the convergence and deteriorates the solutions of RF-PCA. In this paper, a variant of RF-PCA, called RF-PCA2, is proposed. RF-PCA2 uses an integrated objective function both for memberships and principal components. By using alternating optimization, RF-PCA2 is guaranteed to converge on a local optimum. Furthermore, RF-PCA2 converges faster than RF-PCA and the solutions found are more similar to the desired solutions than those of RF-PCA. Experimental results also support this.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5789-5794
• /
• 2015

Recently, thin and light-weight production technologies are needed in IT industry in accordance with increase of the smart phones and mobile PC products. In order to make light and high rigidity products, engineering plastic and aluminum materials are frequently used in products appearance and frame hat support structure. Especially aluminum extrusion and CNC Brick processes are widely used for high strength and high rigidity technology. But extrusion method has constraints to apply exterior design and CNC Brick process has relatively high production cost and low speed of manufacturing. In this research, a new process method is introduced in order to reduce material cost and to improve manufacturing speed dramatically. Plate forging process means basically that thickening of local wall area thickness after deform exterior shape by deep drawing and bending process. Therefore, it is possible to minimize the waste of material and the manufacturing time. In this study the process of plate forging is designed using finite element program AFDEX-2D and the thickness and the width of initial deformed blank. And it is verified as a sample which is a part of laptop developed through the proposed plate forging method.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1841-1848
• /
• 1999

DELVAUX is a genetics-based inductive learning system that learns a rule-set, which consists of Bayesian classification rules, from sets of examples for classification tasks. One problem that DELVAUX faces in the rule-set learning process is that, occasionally, the learning process ends with a local optimum without finding the best rule-set. Another problem is that, occasionally, the learning process ends with a rule-set that performs well for the training examples but not for the unknown testing examples. This paper describes efforts to alleviate these two problems centering on the N-version learning approach, in which multiple rule-sets are learning and a classification system is constructed with those learned rule-sets to improve the overall performance of a classification system. For the implementation of the N-version learning approach, we propose a decision-making scheme that can draw a decision using multiple rule-sets and a genetic algorithm approach to find a good combination of rule-sets from a set of learned rule-sets. We also present empirical results that evaluate the effect of the N-version learning approach in the DELVAUX learning environment.

• The Journal of Korean Society for School & Community Health Education
• /
• v.12 no.2
• /
• pp.113-127
• /
• 2011

Background: University health services have provided comprehensive medical care, counseling, health promotion, and public health services to their students and several other local institutions. To their faculty and staff, university health care centers have served occupational health services and employee assistant program. Purpose: We performed this study to review the health promotion services on two kinds of health care center with different style of university formate. Methods: We tried to collect the data by literature review and interview with executive and provider at health care center in University of California at Berkeley and San Jose State University. Results: Our results were as followed. First, students could use the medical services just as they would their regular doctor's office and urgent care center. Second, the health promotion unit offered programs and services for keeping students healthy and safe, including many opportunities for students to get involved in shaping the public health of the campus. Third, the health promotion recommendation offered from ACHA was useful guideline to improve health status of their member in university campus. Finally, the student satisfaction surveys were used for evaluation and quality improvement. Conclusions: The systematic approach to improve health status of students, faculty and staff can use to maintain a state of optimum health among the diverse student community in support of academic excellence. Coupled with health promotion and public health programs, university health service have to reach all segments of the healthy campus community. To achieve study goals in university, the health care center contributes to promote accountability and responsibility for the health and well being of the members in their campus.

• Journal of Korea Water Resources Association
• /
• v.51 no.10
• /
• pp.887-893
• /
• 2018

In this study, the optimum design technology is suggested by using reliability analysis method. Nowadays, urban flood inundation is easily occurred because of local heavy rain. Traditional deterministic design method for storm sewer may underestimate the size of pipe. Therefore, stochastic method for the storm sewer design is necessary to solve this problem. In the present study, reliability model using FORM (First Order Reliability Method) was developed for the storm sewer. Developed model was applied to the real storm sewers of 5 different areas. Probability of exceeding capacity has been calculated and construction costs according to diameter have been compared. Probability of exceeding capacity of storm sewers of 5 areas have been calculated after estimating the return period of rainfall intensity.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.3
• /
• pp.401-406
• /
• 2011

In order to solve a complex optimization problem more efficiently than traditional approaches, various meta-heuristic algorithms such as genetic algorithm, ant-colony algorithm, and harmony search algorithm have been extensively researched. Compared with other meta-heuristic algorithm, harmony search algorithm shows a better result to resolve the complex optimization issues. Harmony search algorithm is inspired by the improvision process of musician for most suitable harmony. In general, the performance of harmony search algorithm is determined by the value of harmony memory considering rate, and pitch adjust rate. In this paper, modified harmony search algorithm is proposed in order to derive best harmony. If the optimal solution of a specific problem can not be found for a certain period of time, a part of original harmony memory is updated as the selected suitable harmonies. Experimental results using test function demonstrate that the updated harmony memory can induce the approximation of reliable optimal solution in the short iteration, because of a few change of fitness.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.330-339
• /
• 2008

Ground-based interceptors(GBI) comprise a major element of the strategic defense against hostile targets like Intercontinental Ballistic Missiles(ICBM) and reentry vehicles(RV) dispersed from them. An optimum design of the subsystems is required to increase the performance and reliability of these GBI. Propulsion subsystem design and optimization is the motivation for this effort. This paper describes an effort in which an entire GBI missile system, including a multi-stage solid rocket booster, is considered simultaneously in a Genetic Algorithm(GA) performance optimization process. Single goal, constrained optimization is performed. For specified payload and miss distance, time of flight, the most important component in the optimization process is the booster, for its takeoff weight, time of flight, or a combination of the two. The GBI is assumed to be a multistage missile that uses target location data provided by two ground based RF radar sensors and two low earth orbit(LEO) IR sensors. 3Dimensional model is developed for a multistage target with a boost phase acceleration profile that depends on total mass, propellant mass and the specific impulse in the gravity field. The monostatic radar cross section (RCS) data of a three stage ICBM is used. For preliminary design, GBI is assumed to have a fixed initial position from the target launch point and zero launch delay. GBI carries the Kill Vehicle(KV) to an optimal position in space to allow it to complete the intercept. The objective is to design and optimize the propulsion system for the GBI that will fulfill mission requirements and objectives. The KV weight and volume requirements are specified in the problem definition before the optimization is computed. We have considered only continuous design variables, while considering discrete variables as input. Though the number of stages should also be one of the design variables, however, in this paper it is fixed as three. The elite solution from GA is passed on to(Sequential Quadratic Programming) SQP as near optimal guess. The SQP then performs local convergence to identify the minimum mass of the GBI. The performance of the three staged GBI is validated using a ballistic missile intercept scenario modeled in Matlab/SIMULINK.

• Membrane and Water Treatment
• /
• v.1 no.4
• /
• pp.283-296
• /
• 2010

During the disinfection of potable water, humic substances present in the solution react with chlorine to form potential carcinogenic compounds. This study evaluates the feasibility of using a submerged membrane photocatalysis reactor (SMPR) process for treatment of humic substances through the characterization of both organic removal efficiency and membrane hydraulic performance. A simple SMPR was operated and led to the removal of up to 83% of the polluting humic matters. Temporal rates of organic removal and membrane fouling were found to decrease with filtration time. Using tighter membrane in the hybrid process resulted in not only higher organic removal, but also more significant membrane fouling. Under the experimental conditions tested, optimum $TiO_2$ concentration for humic removal was found to be 0.6 g/L, and increasing initial pollutant concentration expectedly resulted in a more substantial membrane fouling. The importance of the influent nature and pollutant characteristics in this type of treatment was also assessed as various water sources were tested (model humic acid solution vs. local water containing natural organic matters). Results from this study revealed the promising nature of the SMPR process as an alternative technique for organic removal in the existing water treatment system.

• Industry Promotion Research
• /
• v.4 no.1
• /
• pp.21-27
• /
• 2019

This study is about the bidet which is used to clean the anal and local parts after the user seated on the left side of the toilet in the toilet. The cleaner of the bidet which is contaminated from various bacteria and dirt is washed clean with clean water to keep it clean The present invention relates to a cleaning device for a bidet cleaner that hygienically maintains a bidet used by a plurality of users. As a result of developing and studying a bidet nozzle that can be implemented with a bidet nozzle and a washing nozzle for automatically washing the jetting head of the bidet and the jetting head, the optimum jetting time of the nozzle after the hydraulic jetting is 1 second To 10 seconds, it was confirmed that the nozzle cleanliness of an average of 5 seconds was maintained at 100%. Subsequent studies will require further study of the durability of the product and the cleaning safety at a pressure of $5kg/mm^2$. Toilet bidet is a product that is closely related to the safety and life of the people, but the development of various technologies is still insufficient. Therefore, it is meaningful that this study contributed to the quality of life of the people by continuously researching and developing the bidet.