• 대한원격탐사학회지
• /
• 제36권5_4호
• /
• pp.1153-1166
• /
• 2020

본 연구는 위성영상 기반의 열 분포도 및 폭염을 심화시키는 요인 간의 공간적 상관성을 분석하여 열 집중지역과 향후 폭염 위험이 증가할 수 있는 공간의 탐색을 목적으로 수행되었다. 열 집중지역과 폭염 심화요인의 인구, 토지이용, 건축물 각각의 전역적 Moran's I는 높게 나타나 특정 공간에 집중하는 것으로 나타났다. 국지적 Moran's I 분석 결과로, 열 집중지역은 수도권 및 광역시 등 대도시에서 주로 나타났고 상대적으로 온도가 낮은 지역은 산림지역이 우세한 강원도 및 경상북도, 소백산맥 지역에서 집중적으로 나타났다. 인구증가율이 높은 지역은 서울 주변의 경기도, 대전, 부산 인근지역에서 군집 분포하였으며 토지이용과 건축물은 수도권과 대도시에 집중하는 유사한 공간 패턴을 보였다. Bivariate Local Moran's I 분석결과는 열이 집중된 지역에서 인구증가율이 높고, 인공적·도시적 건축환경 및 토지이용이 이루어지는 것으로 나타났다. 본 연구결과는 열 집중지역의 순위를 도출할 수 있으며 전국적으로 열이 집중되고 이를 심화시킬 수 있는 환경을 가진 지역을 탐색할 수 있으므로 궁극적으로 선제적 폭염 대응대책 수립에 기여할 수 있을 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.112-117
• /
• 2000

A numerical study on natural convection in a vertical square cavity filled with a porous medium is carried out with Brinkman-Forchheimer-extended Darcy flow model, and the validity of local thermodynamic equilibrium assumption is studied. The local thermodynamic equilibrium refers to the state in which a single temperature can be used to describe a heat transfer process in a multiphase system. With this assumption, the analysis is greatly simplified because only one equation is needed to describe the heat transfer process. But prior to using this assumption, it is necessary to know in what conditions the assumption can be used. The numerical results of this study reveal that large temperature difference between fluid phase and solid phase exists near wall region, paticularily when the convection becomes dominant over conduction. And the influence of flow parameters such as fluid Rayleigh number, fluid Prandtl number, dimensionless particle diameter and conductivity ratio are investigated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.119-125
• /
• 2004

Radiant tube heaters are widely used for indirect heating in heat treatment processes such as continuous annealing line(CAL) or continuous galvanizing line(CGL). Main issues for radiant tube are temperature uniformity, lifetime, thermal efficiency. To achieve higher heat release, the radiant tubes are fired at a higher fuel rate and therefore local overheating occur. A numerical simulation based on a commercial code FLUENT has been performed to investigate local overheating of radiant tube heaters. To minimize local overheating, the effects of radiating fins, flue gas recirculation(FGR), two-stage combustion were investigated. More uniform temperature distribution was achieved in the longitudinal direction within the tube with radiating fins and this contributed to increase the life of radiant tubes. Furthermore, the radiant tube with radiating fins was proven to be more efficient than the one without fins. The effects of flue gas recirculation and two stage combustion on the efficiency of the radiant tube were also considered and the results were presented.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.806-816
• /
• 2017

본 연구는 국지온도에 영향을 미치는 요소를 도출함으로써 국지온도 관리 및 열섬현상 저감을 위한 효과적인 정책제시를 위한 기초데이터 확보를 목적으로 한다. 국지온도에 영향을 미치는 요소로 자연환경, 토지이용, 토지피복 등의 세 가지를 선정하였다. 이를 위해 2007년, 2011~2016년 7월과 8월의 전국 자동기상관측시스템(AWS. Automatic Weather System) 측정 지점 500m 반경($0.79km^2$) 내의 토지피복도, 토지이용 면적 데이터를 활용하였다. 연구를 위해서 다중회귀분석을 바탕으로 위계적 회귀분석(Hierarchical Regression Analysis)을 이용하여 각 변수의 투입에 따른 모델의 설명력을 검토하였다. 연구결과, 도시열섬 저감 및 국지온도 상승을 억제하기 위해서 교통관련 인자들에 대한 조절을 위한 적절한 정책적 수단이 필요하며, 그리고 국지온도 상승을 억제하기 위해서 산림지 면적을 증가시킬 수 있도록 토지이용계획상의 배려가 필요하다는 결론을 얻을 수 있었다. 본 연구는 추후 열섬현상 저감을 위해 보다 효과적인 정책 수립과 도시의 지속성 제고 전략을 마련 할 수 있는 방안을 제시했으며, 토지이용과 토지피복면적 등의 상세한 자료들을 분석에 활용했다는 점에서 의의가 있다.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.877-882
• /
• 2003

The main objective of the present study is to analyze the heat transfer characteristics in the vacuum carburizing furnace. Local temperatures are measured at different locations in the self-fabricated furnace for various operating conditions using K-type thermocouples. In addition, the present study simulates the fluid flows and heat transfer in the vacuum carburizing furnace using a commercial package (Fluent V. 6.0), and compares the predictions of local temperatures with experimental data. The temperature and flow fields are predicted. It is found that the time taken for reaching the steady-state temperature under the vacuum pressure is shorter than that under the normal pressure condition. It means that the carburizing furnace under vacuum pressure condition is capable of saving the required energy more efficiently than the furnace under the normal pressure condition. Furthermore, the temperature variations predicted by the numerical simulations are in good agreement with experimental data.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.408-413
• /
• 2003

Naphthalene sublimation technique is used to investigate the average and local heat transfer from the circular rod, and to determine the average and local heat transfer from the circular rod with and without square wing type mixing vane in axial flow. The experiments are performed for a circular rod and flat plate with and without mixing vane in wind tunnel. In comparison with flat plate and circular rod in axial flow, averaged Nusselts number is increased 2 times as the increase of Reynolds number with mixing vane. Longitudinal vortex induced by square wing type has the stronger vortex strength, so square wing type vortex generator shows an effect further in downstream.

• 동력기계공학회지
• /
• 제18권2호
• /
• pp.12-18
• /
• 2014

The local heat transfer of developed turbulent flows in the stationary ribbed rectangular convergent channels has been investigated experimentally. The rectangular convergent channels with one ribbed surface only have the inclination of $0.72^{\circ}$ and $1.43^{\circ}$ at which the ribbed wall is manufactured with a fixed rib height (e) of 10 mm and the ratio of rib spacing (p) to height (e) =10. The measurement was conducted within the range of Reynolds numbers from 15,000 to 89,000. The local heat transfer characteristics of the rectangular convergent channels are quite different from those of the ribbed square straight channel.

• 설비공학논문집
• /
• 제10권5호
• /
• pp.558-568
• /
• 1998

This paper presents the results of experiments involving external forced convection on boiling heat transfer from electrically heated horizontal tube to water in cross flow. In these experiments, all of the following primary variables were varied: heat flux, cross flow velocity, pressure and degree of subcooling. Local surface temperatures were measured at nine peripheral positions. Surface temperature distributions are classified into four groups as a function of heat flux. The characteristics of the boiling curve at different velocity, degree of subcooling and pressure are examined.

• 한국환경과학회지
• /
• 제11권4호
• /
• pp.281-288
• /
• 2002

This study was carried out for reading the change of local meteorological environment according to dam construction of Nakdong-river using numerical model. The study used PSU/NCAR Mesoscale Model version5(MM5) for inquiring effect of formation of artificial lake after dam construction. The colleague simulated temperature mixing ratio, latent heat flux and sensible heat flux in two cause of existing lake and not. Temperature and mixing ratio in southwest of Andong lake increased because of the air that was warm and moist above the lake moved to southwest due to the northeasterly wind. In the case of existing lake around Andong, latent heat flux increased much in the daytime after sunrise. However, sensible heat flux decreased but it didn't change distinctly in southwest of Andong like the other values.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1458-1463
• /
• 2004

By using unique experimental techniques and careful construction of the experimental apparatus, the characteristics of the local heat transfer were investigated using the condensing R134a two-phase flow, in horizontal single mini-channels. The circular channels ($D_h=0.493$, 0.691, and 1.067 mm) and rectangular channels ($D_h=0.494$, 0.658, and 0.972 mm) were tested and compared. Tests were performed for a mass flux of 100, 200, 400, and 600 $kg/m^2s$, a heat flux of 5 to 20 $kW/m^2$, and a saturation temperature of $40^{\circ}C$. In this study, effect of heat flux, mass flux, vapor qualities, hydraulic diameter, and channel geometry on flow condensation were investigated and the experimental local condensation heat transfer coefficients are shown. The experimental data of condensation Nusselt number are compared with existing correlations.