• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.75-84
• /
• 2018

Thermal stress of livestock has been issued due to recent climate change trends and this causes reproductive disorders, decreased feed consumption, immunosuppression, and increased mortality of animals. Concept of THI has been widely used to quantitatively evaluate the degree of thermal stress for animals, however use of this concept is restricted for animals living in the enclosed facilities such as mechanically ventilated broiler houses. In this study, time-based internal energy flow and variation trends of temperature and humidity were analyzed based on BES technique. Local weather data, insulation characteristics of building materials, heat and moisture generation rate from broilers according to age, algorithm of ventilation operation were adopted for boundary condition of the model to accurately compute THI values inside the mechanically ventilated broiler house. From the BES computation, excess frequency of THI threshold in Jeju city was highest on the assumption that air conditioning equipments were not installed. When general raising density ($39kg\;m^{-2}$) was adopted, total 2,191 hours were exceeded. Excess hours of THI threshold were strongly related to the cumulative air temperature ($R^2=0.87$).

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.1-11
• /
• 2017

While they are becoming more viable, synthetic natural gas (SNG) plants, with their high temperatures and pressures, are still heavily dependent on advancements in the state-of-the-art technologies. However, most of the current work in the literature is focused on optimizing chemical processes and process variables, with little work being done on relevant mechanical damage and maintenance engineering. In this study, a combination of pipe system stress analysis and detailed local stress analysis was implemented to prioritize the inspection locations for main pipes of SNG plant in accordance to ASME B31.3. A pipe system stress analysis was conducted for pre-selecting critical locations by considering design condition and actual operating conditions such as heat-up and cool-down. Identified critical locations were further analyzed using a finite element method to locate specific high-stress points. Resultant stress values met ASME B31.3 code standards for the gasification reactor and lower transition piece (bend Y in Fig.1); however, it is recommended that the vertical displacement of bend Y be restricted more. The results presented here provide valuable information for future risk based maintenance inspection and further safe operation considerations.

• Journal of Embryo Transfer
• /
• v.12 no.2
• /
• pp.181-188
• /
• 1997

This study was carried out to determine the effect of bovine follicular fluid(bFF), hormones, and fetal bovine serum(FBS) supplemented in the medium on the in vitro fertilization and development of bovine embryos. The ovaries were obtained from a local abattoir and placed in physiological saline kept at 30~32˚C and brought to the laboratory within 3~4 hours. The oocytes and follicular fluid were collected by aspiration from visible follicles, and the oocytes of grades I on the basis of the morphology of cumulus cells attached and the homogeneity of cytoplasmic granules were selected and used for maturation. The basal media used for oocyte maturation, fertilization and embryo development in vitro were Ham' F-10, TALP and TCM-199, respectively. The hormones supplemented in maturation medium were consisted of 35 pg /ml FSH, 10 pg /ml LH and 1 pg/mi estradiol-l7$\beta$. The bFF collected from 5~9 mm follicles was centrifuged, filtered and inactivated by heat-treatment at 56˚C for 30 min. FBS also was inactivated with the same method and kept at -20˚C until use. The embryos were co-cultured with the monolayer of bovine oviductal epithelial cells at 39˚C under 5% $CO_2$ in air for 9 days. The results obtained were summarized as follows: The fertilization rate of oocytes was found 87.4% from 10% FBS and hormones treatment for IVM, and 37.1% of these TVF embryos were developed to blastocyst stage in 10% FBS groups. Compared with this control system, the fertilization rate was decreased significantly(P<0.05) in the maturation without either FBS or hormones. These IVF embryos were developed to morula stage at the similar rate, but to blastocyst at significantly(P<0.05) lower rate in the embryo culture with or without FBS supplementation. The fertilization rate(82.9%) in hormones and 10% inactivated bFF was similar with 10% FBS and hormone groups(87.4%), but decreased significantly(P<0.05) in 20 or 30% bFF (61.0 or 66.0%), respectively. In vitro developmental competence to blastocyst stage in 10% FBS and 20% inactivated bFF(37.1% and 31.4%) was higher than in 10 or 30% inactivated bFF(20.0 or 19.2%) or 10, 20 and 30% fresh bFF(19.1, 21.0 and 17.5%) The results indicated that the in vitro fertillzation and development rate of the embryos should be improved in 10% FBS or 20% inactivated culture system and 20% inactivated bFF might be available economically for bovine oocyte maturation and embryo culture instead of fetal bovine serum.

• Horticultural Science & Technology
• /
• v.32 no.2
• /
• pp.184-192
• /
• 2014

Various types of unit packaging methods were applied for 'Fuji' apples during short-term cold storage and export simulation. Gas tightness of the package was controlled stepwise in the successive two-year experiments using different perforation treatments (none, punch hole, or pinhole) and sealing methods (tie v s. heat seal). Risk of tight packaging and effectiveness of macroperforation on weight loss and quality maintenance were analyzed as related to changes in gas concentration inside the packages. Immediately after harvest, each 5 apple units were packaged in $40{\mu}m$ polypropylene (PP) film bags, stored 4 weeks at $0^{\circ}C$, and then put on the shelf for one week at ambient temperature in the preliminary experiment, In the main experiment, export process was imposed after storage simulating 2 week refrigerated container shipment at $0^{\circ}C$ plus one week local marketing at ambient temperature. Non-perforated film packaging with relatively high gas tightness induced flesh browning caused by carbon dioxide accumulation regardless of the sealing methods. Among perforated film packaging, in contrast, atmospheric modification was partly established only in the pinhole treatment and flesh browning symptom was not observed in all the treatments. Even the punch hole perforated film packaging without gas tightness effectively reduced the weight loss, whereas had slight benefits for quality maintenance. Reduced perforation using pinhole treatment seemed to improve sensory texture, while effects on physicochemical quality were insignificant. Overall results suggest the need of more minute perforation treatments on the packaging film to ensure modified atmosphere effects on quality maintenance.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2018

Visibility is very poor in tunnel fire because of confined space where the fire may easily lead to the mass casuality incident because of fast smoke spread. In this test, air curtain and the fan were installed at rescue station in a bid to make use of rescue station in safe way during the train fire in undersea tunnel and a full-scale fire test was conducted to identify the applicability of air curtain system. Air curtain system was installed at a real rescue station and the test was continued for 2 minutes till heptane which was used as fire source was completely burned out. When air curtain was working, difference in temperature between inside and outside the platform was $160^{\circ}C$ and carbon monoxide measured inside the platform was less than the case of no air curtain system by 160 ppm. Thus a full-scale fire test demonstrated that the air curtain system installed at rescue station in undersea tunnel was able to effectively block the heat and smoke generated from the fire.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.721-733
• /
• 2020

In nuclear engineering, the occurrence of critical heat flux (CHF) is complicated for rod bundle, and it is much more difficult to predict the CHF when it is in natural circulation under motion condition. In this paper, the dryout-type CHF is investigated for the rod bundle in a natural circulation loop under rolling motion condition based on the coupled analysis of subchannel method, a one-dimensional system analysis method and a CHF mechanism model, namely the three-fluid model for annular flow. In order to consider the rolling effect of the natural circulation loop, the subchannel model is connected to the one-dimensional system code at the inlet and outlet of the rod bundle. The subchannel analysis provides the local thermal hydraulic parameters as input for the CHF mechanism model to calculate the occurrence of CHF. The rolling motion is modeled by additional motion forces in the momentum equation. First, the calculation methods of the natural circulation and CHF are validated by a published natural circulation experiment data and a CHF empirical correlation, respectively. Then, the CHF of the rod bundle in a natural circulation loop under both the stationary and rolling motion condition is predicted and analyzed. According to the calculation results, CHF under stationary condition is smaller than that under rolling motion condition. Besides, the CHF decreases with the increase of the rolling period and angular acceleration amplitude within the range of inlet subcooling and mass flux adopted in the current research. This paper can provide useful information for the prediction of CHF in natural circulation under motion condition, which is important for the nuclear reactor design improvement and safety analysis.

• Journal of the Korean earth science society
• /
• v.33 no.3
• /
• pp.219-232
• /
• 2012

The intensive observation (ProbeX-2010) was performed to investigate an urban effect on summer rainfall over the Seoul metropolitan area from 13 August to 3 September 2010. Two kinds of urban effect were detected. First, weak rainfall (${\leq}1\;mm\;hr^{-1}$) was observed more frequently in the downwind area of Seoul than any other area of the country. The high frequency of weak rainfall in the downwind area was also confirmed from the recent five years of observational data (2006-2010). Because the high frequency was more apparent in mountainous regions during nighttime, the weak rainfall seems to be caused by a combined effect of urbanization and topography. Second, sporadically, a convective system was developed rapidly in the downwind area of Seoul, causing heavy rainfall (${\geq}10\;mm\;hr^{-1}$). It can be most clearly seen in series of radar images around 1300-1500 KST 27 August 2010. We investigated in detail the synoptic and local weather and upper air conditions. As a result, not only urban-induced high sensible heat but also conditionally unstable atmosphere (especially unstable in low level) and low level moisture were pointed out as important factors that contributed to urban-induced heavy rainfall.

• The Journal of Korean Medical History
• /
• v.33 no.1
• /
• pp.31-41
• /
• 2020

Purpose : This study compares prescriptions in the 1901 edition of the Donguisusebowon (東醫壽世保元) and the 1901 edition of 24 Revised Tae-eum constitution prescriptions (新定太陰人病應用要藥二十四方) (1901PCDT) with medical herbs found in classical texts. This study also examines whether to include patterns which compose medical herbs for the person of Tae-eum constitution (太陰人). Method : The prescriptions for Tae-eum-in in the Shinchukbon and the ingredients of medical herbs of the prescriptions of the Complete Works of Zhang Jingyue (景岳全書), Secret Works of Universal Benefit (廣濟秘笈), Treasured Mirror of Eastern Medicine (東醫寶鑑), Comprised Edition for Formulas (方藥合編), Protecting Essence for Longevity (壽世保元), Introduction to Medicine (醫學入門), New Book for Saving People (濟衆新編 ENGLISH), and Compendium of Local Medicinals and Formulas (鄕藥集成方) were input into a database. The prescriptions were examined and combinations of medical herbs used to treat the person of Tae-eum constitution were noted. Result : Among the prescriptions for the person of Tae-eum constitution, similar examples of the 17 prescriptions of Kudzu Decoction to Relieve the Muscles (葛根解肌湯), Regulate the Stomach and Coordinate the Purity Decoction (調胃升淸湯), Clear the Heart and Lotus Pip Decoction (淸心蓮子湯), Decoction for Stabilizing Asthma with Ephedra (麻黃定喘湯), Profuse Heat and Sparse Cold Decoction (熱多寒少湯), Decoction for Coordinating Qi with Kudzu (葛根承氣湯), Major Decoction for Coordinating Qi with Kudzu (葛根大承氣湯), Minor Decoction for Coordinating Qi with Kudzu (葛根小承氣湯), Decoction for Dispersing the Exterior with Ephedra (麻黃發表湯), Boost the Lung Essence Decoction (補肺元湯), Major Supplementing Decoction with Deer Antler Velvet (鹿茸大補湯), Boosting Black Essence Pill (拱辰黑元丹), Honeylocust Fruit and Rhubarb Decoction (皂角大黃湯), Kudza and Duckweed Decoction (葛根浮萍湯), Sweet Flag and Polygala Powder (石菖蒲遠志散), Liriopis and Polygala Decoction Powder (麥門冬遠志散), and Cattle Gallstone Formula to Clear the Heart (牛黃淸心元) were found in important ancient literature and Dried Chestnut and Holotrichia Decoction (乾栗蠐螬湯) and Dried Chestnut and Tree of Heaven Root Bark Decoction (乾栗樗根皮湯) are the combination originally set by Lee Jema. Conclusion : Because 70.8% of the prescriptions in 1901PCDT could be found in literature which were pervasive in the period of the Joseon Dynasty (the period of Ming and Qing), it corresponds with Lee Jema's view that medical men in the Song, Yuan, and Ming Dynasties disclosed half of the prescriptions for Tae-eum person by studying these texts more.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.542-547
• /
• 2015

Since the oil price has been significantly jumped for several years, a heavy oil of low quality has been mainly used in the diesel engine of the merchant ship. Thus, a combustion chamber of the engine has been often exposed to severely corrosive environment more and more because temperature of the exhaust gas of the combustion chamber has been getting higher and higher with increasing of using the heavy oil of low quality. As a result, wear and corrosion of the engine parts such as exhaust valve, piston crown and cylinder head surrounded with combustion chamber are more serious compared to the other parts of the engine. Therefore, an optimum repair welding for these engine parts is very important to prolong their lifetime in a economical point of view. In this study, Inconel 625 filler metal were welded with GTAW method in the cast steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected and base metal zones were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. The weld metal and base metal zones exhibited the highest and lowest values of hardness respectively. Furthermore, the corrosion current density of the weld metal zone revealed the lowest value, having the highest value of hardness. The corrosive products with red color and local corrosion like as a pitting corrosion were considerably observed at the base metal zone, while these morphologies were not wholly observed in the weld metal zone. In particular, the polarization characteristics such as impedance, polarization curve and cyclic voltammogran associated with corrosion resistance property were well in good agreement with each other. Consequently, it is suggested that the mechanical and corrosion characteristics of the piston crown can be predominantly improved by repair welding method using the Inconel 625 electrode.

• The Journal of the Korean bone and joint tumor society
• /
• v.3 no.1
• /
• pp.32-38
• /
• 1997

PURPOSE : For the reconstruction of large bone defect after tumor resection, it is possible to reuse the bone involved by tumor with some treatment to it. Several bone-reusing methods have been reported such as autoclaving, low-heat treatment(pasteurization) and intraoperative radiotherapy. We have used extracorporeally radiated autogenous bone graft for reconstruction after tumor resection, and analyzed the periods for junctional union, functional results and complications to know the indications of this method. METHODS : From Dec. 1993 to Sept. 1995, nine patients had taken autogenous bone graft with extracorporeal irradiation. Eight cases were osteosarcoma and 1 giant cell tumor. The graft sites were 5 in femur, 3 proximal tibia and 1 femur and tibia. Stage 3 was 1 case(GCT), Stage IIB 3 and Stage IIIB 5. After wide resection, surrounding soft tissue and intramedullary and extramedullary portion of the tumor were removed. Radiation was done in 5000cGy to the resected bone. Ender nails and bone cement were inserted and filled into the medulla to prevent fracture. RESULTS : Average follow-up period was 12.3(4 to 21) months. Average junctional union period in simple X-ray was 6.5 months in 4 cases. Average functional score following Enneking's criteria was 19(12-27). Complications were as follows ; condylar fractures and femur neck fracture in 4 cases, subluxation of the knee joint 3 and infection 1. Although local recurrence was detected in 1 case, the site of recurrence was not in the radiated bone but surrounding soft tissue. At final follow-up, no recurrence was found in one case(GCT), CDF 2, AWD 2, DOD 3, and died of chemotherapy related sepsis 1. CONCLUSIONS : Extracorporeally radiated bone autograft is considered to be a method for reconstruction of the large bone defect made by tumor resection, especially in the reconstruction around the joint.