• Title/Summary/Keyword: Lobe shape

Search Result 93, Processing Time 0.035 seconds

Assessment of Resistance Spot Weldability of Dissimilar Joints of Austenitic Stainless Steels/IF Steels and Ferritic Stainless Steels/IF Steels (페라이트계 및 오스테나이트계 스테인리스강과 IF강의 이종 접합부의 저항 점 용접성 평가)

  • Lee, Jin-Beom;Kim, Dong-Cheol;Nam, Dae-Geun;Kang, Nam Hyun;Kim, Soon-Kook;Yu, Ji-Hun;Rhym, YoungMok;Park, Yeong-Do
    • Korean Journal of Metals and Materials
    • /
    • v.49 no.1
    • /
    • pp.64-72
    • /
    • 2011
  • The spot weldability of dissimilar metal joints between austenitic stainless steels (STS316)/IF steels and ferritic stainless steels (STS430)/IF steels was investigated. This study was aimed to determine the spot welding parameters for a dissimilar metal joint and to evaluate the dissimilar metal joint's weldability, including its welding nugget shape, tensile-shear strength, hardness, and microstructure. The comparison of these results was described in terms of fracture behavior. Compared with the weld lobe of similar metal joints, dissimilar metal joints (STS430/IF) had reduced weld current range. However, the weld lobe of STS316/IF steel joint showed increased weld current range. This is because the dilution of chemical composition in the molten weld pool suppressed the heat input being caused by Joule heat with current flow through the samples. The microstructure of the fusion zone was fully martensite and mixture of ferrite and martensite for austenitic stainless steel/IF steel and ferritic stainless steel/IF steel combination, respectively. The experimental results showed that the shape of nugget was asymmetric, in which the fusion zone of the austenitic and ferritic stainless steel sheet was larger due to the higher bulk-resistance. The predicted microstructure by using the Schaeffler diagram was well matched with experimental results. After peel test, the fracture was initiated from heat affected zone of ferritic stainless steel sheet side, however the final fracture was propagated into the IF steel sheet side due to its lower strength.

The Diagnostic Yield and Complications of Percutaneous Needle Aspiration Biopsy for the Intrathoracic Lesions (경피적 폐생검의 진단성적 및 합병증)

  • Jang, Seung Hun;Kim, Cheal Hyeon;Koh, Won Jung;Yoo, Chul-Gyu;Kim, Young Whan;Han, Sung Koo;Shim, Young-Soo
    • Tuberculosis and Respiratory Diseases
    • /
    • v.43 no.6
    • /
    • pp.916-924
    • /
    • 1996
  • Bacground : Percutaneous needle aspiration biopsy (PCNA) is one of the most frequently used diagnostic methcxJs for intrathoracic lesions. Previous studies have reponed wide range of diagnostic yield from 28 to 98%. However, diagnostic yield has been increased by accumulation of experience, improvement of needle and the image guiding systems. We analysed the results of PCNA performed for one year to evaluate the diagnostic yield, the rate and severity of complications and factors affecting the diagnostic yield. Method : 287 PCNAs undergone in 236 patients from January, 1994 to December, 1994 were analysed retrospectively. The intrathoracic lesions was targeted and aspirated with 21 - 23 G Chiba needle under fluoroscopic guiding system. Occasionally, 19 - 20 G Biopsy gun was used for core tissue specimen. The specimen was requested for microbiologic, cytologic and histopathologic examination in the case of obtained core tissue. Diagnostic yields and complication rate of benign and malignant lesions were ca1culaled based on patients' chans. The comparison for the diagnostic yields according to size and shape of the lesions was analysed with chi square test (p<0.05). Results : There are 19.9% of consolidative lesion and 80.1% of nodular or mass lesion, and the lesion is located at the right upper lobe in 26.3% of cases, the right middle lobe in 6.4%, the right lower lobe 21.2%, the left upper lobe in 16.8%, the left lower lobe in 10.6%, and mediastinum in 1.3%. The lesion distributed over 2 lobes is as many as 17.4% of cases. There are 74 patients with benign lesions, 142 patients with malignant lesions in final diagnosis and confirmative diagnosis was not made in 22 patients despite of all available diagnostic methods. 2 patients have lung cancer and pulmonary tuberculosis concomittantly. Experience with 236 patients showed that PCNA can diagnose benign lesions in 62.2% (42 patients) of patients with such lesions and malignant lesions in 82.4% (117 patients) of patients. For the patients in whom the first PCNA failed to make diagnosis, the procedure was repeated and the cumulative diagnostic yield was increased as 44.6%, 60.8%, 62.2% in benign lesions and as 73.4%, 81.7%, 82.4% in malignant lesions through serial PCNA. Thoracotomy was performed in 9 patients with benign lesions and in 43 patients with malignant lesions. PCNA and thoracotomy showed the same pathologic result in 44.4% (4 patients) of benign lesions and 58.1% (25 patients) of malignant lesions. Thoracotomy confirmed 4 patients with malignat lesions against benign result of PCNA and 2 patients with benign lesions against malignant result of PCNA. There are 1.0% (3 cases) of hemoptysis, 19.2% (55 cases) of blood tinged sputum, 12.5% (36 cases) of pneumothorax and 1.0% (3 cases) of fever through 287 times of PCNA. Hemoptysis and blood tinged sputum didn't need therapy. 8 cases of pneumothorax needed insertion of classical chest tube or pig-tail catheter. Fever subsided within 48 hours in all cases. There was no difference between size and shape of lesion with diagnostic yield. Conclusion: PCNA shows relatively high diagnostic yield and mild degree complications but the accuracy of histologic diagnosis has to be improved.

  • PDF

External Morphology and Numerical Taxonomy of Hanabusaya asiatica Populations in Different Habitats (자생지별 금강초롱꽃의 외부형태 및 수리분류)

  • 유기억;이우철;류승열
    • Korean Journal of Plant Resources
    • /
    • v.13 no.1
    • /
    • pp.80-88
    • /
    • 2000
  • External morphology and numerical taxonomy by principal component analysis and cluster analysis were investigated to understand the taxonomic relationships on the populations of Hanabusaya asiatica from 6 different habitats. Additionally H. latisepala was used as a outgroup. The distinct characters to each habitat were not present in the measurement of 21 qualitative characters except for some native individuals in the top of Mt. Sorak and Hyangrobong based on leaf shape and bracts. This results were recognized as the continuous variations of external morphology. The populations of H. latisepala and H. asiatica were identified by calyx lobe shape. The results obtained based on the principal component(PC) analysis of treated 78 OTU were divided into two groups by PC 1,2,3, and the sums of contributions for the total variance were 50.07% (PC1 22.3% , PC2 15.7%, PC3 12.0%, respectively), and six populations were not distinctly identified as illustrated in two dimensions with PC1 and PC2. In cluster analysis based on average linkage cluster analysis and Ward's method, there were similarities in the composition of clustered taxa, and each populations were not identified.

  • PDF

Steering Beam Pattern Synthesis of Line Array SONAR using Modified Two Step Least Squares Method (개선된 2단 최소자승법을 이용한 선배열 소나의 조향 빔 형성)

  • Park, Kyung-Min;Lee, Seok-Jin;Chung, Suk-Moon
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.51 no.6
    • /
    • pp.228-236
    • /
    • 2014
  • Towed array SONAR is deformed because it operates in fluid such as an ocean. It especially undergoes significant change in shape as a towing vessel takes a turn. In this case, beam pattern synthesis of the line array is limited, resulting in degradation in quality such as signal-to-noise ratio. This paper presents a modified two-step least squares algorithm based on the two-step least squares method. The shape of the sea-operated line array formation with the towing vessel changing course(angle) was modeled and the algorithm was subsequently applied. While changing course and location of the main lobe in beam pattern was altered, signal-to-noise ratio of steering beam pattern synthesis was analyzed by algorithm (proposed and others). As a result, the proposed algorithm presented improvement in performance by 2dB compared to other algorithms while forming relatively constant beam pattern.

Effects of Noradrenaline on the Membrane Potential of Prostatic Neuroendocrine Cells of Rat

  • Kim, Jun-Hee;Shin, Sun-Young;Uhm, Dae-Yong;Kim, Sung-Joon
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.7 no.1
    • /
    • pp.47-52
    • /
    • 2003
  • The prostate gland contains numerous neuroendocrine cells that are believed to influence the function of the prostate gland. Our recent study demonstrated the expression of both ${\alpha}1$- and ${\alpha}2$-ARs, signaling the release of stored $Ca^{2+}$ and the inhibition of N-type $Ca^{2+}$ channels, respectively, in rat prostate neuroendocrine cells (RPNECs). In this study, the effects of NA on the resting membrane potential (RMP) of RPNECs were investigated using a whole-cell patch clamp method. Fresh RPNECs were dissociated from the ventral lobe of rat prostate and identified from its characteristic shape; round or oval shape with dark cytoplasm. Under zero-current clamp conditions with KCl pipette solution, the resting membrane potential (RMP) of RPNECs was between -35 mV and -85 mV. In those RPNECs with relatively hyperpolarized RMP (<-60 mV), the application of noradrenaline (NA, $1{\mu}M$) depolarized the membrane to around -40 mV. In contrast, the RPNECs with relatively depolarized RMP (>-45 mV) showed a transient hyperpolarization and subsequent fluctuation at around -40 mV on application of NA. Under voltage clamp conditions (holding voltage, -40 mV) with CsCl pipette solution, NA evoked a slight inward current (<-20 pA). NA induced a sharp increase of cytosolic $Ca^{2+}$ concentration ($[Ca^{2+}]_c$), measured by the fura-2 fluorescence, and the voltage clamp study showed the presence of charybdotoxin-sensitive $Ca^{2+}$-activated $K^+$ currents. In summary, adrenergic stimulation induced either depolarization or hyperpolarization of RPNECs, depending on the initial level of RMP. The inward current evoked by NA and the $Ca^{2+}$-activated $K^+$ current might partly explain the depolarization and hyperpolarization, respectively.

A Study on the Somatotype of the Upper Body for the Women's Bodice Pattern (길 원형을 위한 상반신의 체형 연구 - 한국 성인 여성을 대상으로 -)

  • Lee Soon Won;Nam Yun Ja
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.15 no.4 s.40
    • /
    • pp.341-349
    • /
    • 1991
  • This study was done to provide basic data for clothing design and thus to contribute to the academic development of the clothing and textile area. The focus of this study was to charac­terize the somatotype based on each individual's lateral view. For this purpose, firstly, categorization of the subjects based on their lateral view and definition of each category, secondly, characterization of each somatotype, and thirdly, sugges­tion of the deterministic criteria of each category were complished. The subjects in this study were female college students of 18 to 26 year-old whose somatotypes were comparatively invariable after cessation of physical growth. The metrical items characterizing upper body lateral view were chosen. Data were collected through Anthropometry and Photometry and analyzed by Factor analysis. The results were as follows; 1. Each subject's side view contour was classified as straight type, lean-back type, bend­forward type, and swayback according to its position to the relative plumb line. Straight type was defined as the type in which the plumb line passes through the lobe of the ear, the shoulder joint, and the mid abdominal region laterally. Lean-back type positioned the plumb line more posteriorly than straight type. Bend-forward type positioned the plumb line more anteriorly than straight type. Swayback positioned the plumb line at about the same line as straight type. And curvature of side view contur was more prominent in this type than in straight type. 2. Seven factors were figured out. The first factor was representing upperbody volume, and the second factor was representing size, the third factor was horizontal distance from lateral view representing size view contour. The fourth factor was front body length, the fifth factor was back body length. The sixth factor was shoulder length and shoulder width representing shoulder shape. The seventh factor was the bust shape.

  • PDF

Improvement of free-space optical interconnection efficiency by using circular aperture CGH

  • Shin, Chang-Mok;Seo, Dong-Hoan;Cho, Kyu-Bo;Kim, Cheol-Su;Lee, Ha-Woon;Kim, Soo-Joong
    • Proceedings of the IEEK Conference
    • /
    • 2002.07a
    • /
    • pp.9-11
    • /
    • 2002
  • We improve the free-space optical interconnection efficiency by using circular aperture computer-generated hologram (CGH). In free-space optical interconnection system using CGH, the single CGH is composed of sub-CGHs, which can change the direction of input beams to desired output positions, by Fourier transform. Each sub-CGH is rectangular shape, so the input beams through each sub-CGH are transformed to sinc functions in output plane. The side lobes of each sinc function are superimposed in output plane and they result in detection error in output plane, so the detection efficiency is low. We use the circular shaped sub-CGHs in order to reduce the side lobe value in output plane instead of rectangular shaped sub-CGHs. The each input beam is transformed to first-order Bessel functions through circular shaped sub-CGHs in output plane. The side lobes of first-order Bessel functions us low values compared with side lobes of sinc function, so we can improve the detection efficiency in output plane. We use binary phase modulated CGH, and confirm this improvement results by simulation.

  • PDF

SAW Serial Type AWQPSK Modulator (탄성표면파 직렬형 AWQPSK 변조기)

  • Ha, Jun-Ho;Kim, Geun-Muk;Park, Yong-Seo;Hwang, Geum-Chan
    • The Journal of the Acoustical Society of Korea
    • /
    • v.6 no.3
    • /
    • pp.43-51
    • /
    • 1987
  • In this work an implementation of SAW based serial type AWQPSK modulator is studied. The SAW AWQPSK modulator consisting of input apodized IDT and output uniform IDT with center frequency of 20 MHz and bit rate of 4MHz has been designed and fabricated on $YZ-LiNbO_3$ substrate. Measured center frequency and null-to-null bandwidth are 20MHz, respectively. The sidelobe suppression is achieved 60dB below the peak mainlobe level. Measured responses meet the theoretical values with tolerable amount of deviation. SAW-based modulator simplifies the implementation of AWQPSK which uses complex pulse shape as a baseband pulse.

  • PDF

Primary Hemangiopericytoma of the Lung -1 Case Report - (폐에 발생한 원발성 혈관주위세포종 -1례 보고-)

  • 최광민;김건일;신호승;박희철;홍기우
    • Journal of Chest Surgery
    • /
    • v.31 no.3
    • /
    • pp.315-318
    • /
    • 1998
  • Primary hemangioperiycytoma is quite rare tumor of the lung and arising from pericyte in external layer of capillaries. Most cases are developed in 4th and 5th decade, are asymptomatic, and have malignant otential. On chest radiography, primary pulmonary hemangiopericytoma shows lobulated, well demarcated, homogeneous soft tissue density. Microscopically, it consisits of numerous vascular spaces of variable size and shape separated by aggregates of tightly packed oval to spindle-shaped cells. Treatment of choice is surgical excision. We report a case of primary pulmonary hemangiopericytoma in a 16-year-old man who had well demarcated homogeneous mass in the superior segment of left lower lobe, but had no symptom. He had undergone left lower lobectomy. He has been followed up for 8 months but has no sign of relapse or metastasis yet.

  • PDF

Vortex Pairing and Jet-Spreading in an Axisymmetric Jet under Helical Fundamental and Axisymmetric Subharmonic Forcing (헬리컬 기본교란과 축대칭 분수조화교란을 이용한 원형제트에서의 보텍스 병합 및 제트확산)

  • Cho, Sung Kwon;Yoo, Jung Yul;Choi, Haecheon
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.22 no.11
    • /
    • pp.1610-1624
    • /
    • 1998
  • An axisymmetric jet is forced with two helical fundamental waves of identical frequency spinning in opposite directions and an additional axisymmetric sub harmonic wave. The subharmonic component rapidly grows downstream from subharmonic resonance with the fundamental, significantly depending on the initial phase difference. The variations of the subharmonic amplitude with the initial phase difference show cusp-like shapes. The amplification of the sub harmonic results in 'vortex pairing of helical modes'. Furthermore, azimuthal variation of the amplification induces an asymmetric jet cross-section. When the initial subharmonics is imposed with an initial phase difference close to a critical value, the jet-cross section evolves into a three-lobed shape. One lobe is generated by the enhanced vortex pairing and the other two lobes are generated by the delayed vortex pairing. Thus, it is confirmed that the initial phase difference between the fundamental and the subharmonic plays an important role in controlling the jet cross-section.