• 한국물환경학회지
• /
• 제30권3호
• /
• pp.351-360
• /
• 2014

The allocation of margin of safety (MOS) at a uniform rate to all areas of the unit watershed makes it very difficult to keep the load allotment stable in the area for lack of reduction measures like forest land. This study developed an equation to calculate margin of safety differentially according to the regional characteristics. The equation was formulated on the basis of the regional characteristic factors such as a load contribution factor for land use type and a site conversion factor for the unit watershed. The load contribution factor represents a contribution of loads from a particular land use. The site conversion factor was derived from the site conversion ratio of a unit watershed. Margin of safety for the non-point pollution load in the land use sector decreased by 20~25% in three river basins. The margin of safety in the unit watersheds with low site occupation ratios decreased in high rate, while in the unit watersheds with large urban area decreased in low rate. With the application of the differential margin of safety considering regional characteristics, not only the reduction of pollution loads can become lighter but also it can be easier to develop plans for Total Maximum Daily Loads (TMDLs) even where the reduction measures are not available.

• 한국해양환경ㆍ에너지학회지
• /
• 제10권1호
• /
• pp.29-43
• /
• 2007

한국 남해의 연안역(진해만에서 부산연안)에 있어서 효율적인 수질관리를 위해서, 3차원 생태-유체역학 모델을 적용하여 하계 수질을 예측하고, 목표 수질회복을 위한 오염부하 삭감량을 산정하였다. 현재의 오염부하량 조건하에서 연안해역의 수질(화학적 산소요구량과 영양염류 농도 등)은 설정된 해양환경수질기준을 초과하였고, 또한 부영양화 상태에 있기 때문에 유입하는 오염부하량의 저감이 필요하였다. 이러한 배경하에서, 모델이 적용되어 보정과 검증과정을 통해 연구해역의 유동장과 수질 분포를 유사하게 모의하였다. 시나리오 분석결과, 진해만 해역은 $Chl-{\alpha}\;10{\mu}g\;1^{-1}$와 $COD\;3\;mg\;1^{-1}$ 이하를 동시에 만족하기 위해서는 육상 점오염원으로부터 90% 정도의 오염물질 저감뿐만 아니라, 장기간 오염물질의 유입으로 인한 베이스 농도 자체가 높아서 이를 저감하기 위한 퇴적물로부터 용출되는 질소와 인도 약 70% 정도 삭감해야 하는 것으로 나타났다. 낙동강 하구해역은 $Chl-{\alpha}\;10{\mu}g\;1^{-1}$와 $COD\;2\;mg\;1^{-1}$ 이하를 만족하기 위해서는 낙동강 자체의 유입부하량을 약 80% 정도 저감해야 하며, 낙동강 하구해역을 제외한 부산 연안역은 $Chl-{\alpha}\;10{\mu}g\;1^{-1}$와 $COD\;1\;mg\;1^{-1}$ 이하를 만족하기 위해서는 유입부하의 70% 정도의 삭감이 이루어져야 하는 것으로 예측되었다. 연구해역의 수질이 공간적으로 차이가 있으나 대체적으로 상당히 오염된 상황이라 이러한 삭감량은 매우 커서 현실적으로 단기간에 달성하기는 어려울 것이다. 그러므로 장기적인 관점에서 지속적인 노력 즉, 해역으로 유입하는 미처리된 오염물질 차단, 수처리시설의 확충과 제거 능력 향상 및 오염된 퇴적물 정화 등이 필요하다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.144-145
• /
• 2013

With the increasing public concerns on sustainability in construction industry around the world, a variety of standards for sustainable construction have been developed and implemented. However, most of the them focuses operation and maintenance phases and do not have been approached integrally in terms of all construction phases. Especially, considering the quantities of environmental loads occurred intensively at the construction phases, it should not be overlooked. Therefore, the purpose of this study is to deduct primary management works for reduction of the potential environmental loads at the construction phases. In order to assess them quantitatively, we conduct a survey from professionals who are in the relevant fields and analyze these data using Fuzzy-AHP.

• Computers and Concrete
• /
• 제21권2호
• /
• pp.117-126
• /
• 2018

This research investigate the behavior of reinforced normal and lightweight aggregate concrete hollow core slabs with different core shapes, shear span to effective depth (a/d). The experimental work includes testing seven reinforced concrete slabs under two vertical line loads. The dimensions of slab specimens were (1.1 m) length, (0.6 m) width and (0.12 m) thickness. The maximum reduction in weight due to aggregate type was (19.28%) and due to cross section (square and circular) cores was (17.37 and 13.64%) respectively. The test results showed that the decrease of shear span to effective depth ratio from 2.9 to 1.9 for lightweight aggregate solid slab cause an increase in ultimate load by (29.06%) and increase in the deflection value at ultimate load or the ultimate deflection by (17.79%). The use of lightweight aggregate concrete in casting solid slabs give a reduction in weight by (19.28%) and in the first cracking and ultimate loads by (16.37%) and (5%) respectively for constant (a/d=2.9).The use of lightweight aggregate concrete in casting hollow circular core slabs with constant (a/d=2.9) (reduction in weight 32.92%) decrease the cracking and ultimate loads by (12%) and (5.18%) respectively with respect to the solid slab. These slab specimens were analyzed numerically by using the finite element computer program ANSYS. Good agreements in terms of behavior, cracking load (load at first visible crack) and ultimate load (maximum value of testing load) was obtained between finite element analysis and experimental test results.

• Wind and Structures
• /
• 제38권3호
• /
• pp.203-214
• /
• 2024

Large-span cantilevered roof represents a unique type of structure that is vulnerable to wind loads. Inspired by the need to maximumly reducing the rooftop wind loads, this study examined the feasibility of positioning vented slots on the leading edge, and the effectiveness of such aerodynamic mitigation measures are assessed via both physical and numerical simulations. The reliability of numerical simulation was evaluated via comparisons with the wind tunnel tests. The results indicated that, the variation of venting hole arrangement can cause significant change in the rooftop wind load characteristics. For the cases involved in this study, the maximum reduction of mean and peak wind suction coefficients are found to be 9% and 8% as compared to the original circular slot without venting holes. In addition, the effect of slot shape is also evident. It was shown that the triangular shaped slot tends to increase the wind suction near the leading edge, whereas the hexagonal and octagonal shaped slots are found to decrease the wind suction. In particular, with the installation of octagonal shaped slot, the maximum reduction of wind suction coefficients near the leading edge reaches up to 31% as compared to the circular shaped slot, while the maximum reduction of mean wind suction coefficients is about 30%.

• 지질공학
• /
• 제7권3호
• /
• pp.207-216
• /
• 1997

터널 라이닝에 작용하는 하중을 예측하는 것은 터널설계에서 가장 중요한 문제 중의 하나이다. 하지만 수치해석적 방법외의 기존의 해석적 방법들은 터널건설 방법이나 지질학적인 다양성을 충분히 고려하지 않고 있다. 에드몬톤의 터널에서 실제로 측정된 하중을 기존의 해석적 방법을 이용해 얻어진 하중과 비교하였다. 하지만 기존의 방법들은 터널 하중을 예측하는데 만족하지 못한 결과를 보여주고 있다. 터널 라이닝을 설치하기 이전에 터널 전면에서 일어나는 응력 감소를 고려해 주기 위하여 아이젠스타인-네그로의 방법과 기존의 방법을 결합하여 터널 하중을 예측할 것을 제안 하였다.

• Structural Engineering and Mechanics
• /
• 제32권1호
• /
• pp.167-178
• /
• 2009

Initial imperfections, such as initial deflection or remaining stress, cause deterioration of buckling strength of structures. The Koiter imperfection sensitivity law has been extended to describe the mechanism of reduction for structures. The extension is twofold: (1) a number of imperfections are considered, and (2) the second order (minor) imperfections are implemented, in addition to the first order (major) imperfections considered in the Koiter law. Yet, in reality, the variation of external loads is dominant over that of imperfection. In this research, probabilistic evaluation of buckling loads against external loads subjected to probabilistic variation is conducted by extending the concept of imperfection sensitivity. A truss arch subjected to dead and live loads is considered as a numerical example. The mechanism of probabilistic variation of buckling strength of this arch is described by the proposed method, and its reliability is evaluated.

• Wind and Structures
• /
• 제20권1호
• /
• pp.95-115
• /
• 2015

Wind effects on roofs are usually considered by equivalent static wind loads based on the equivalence of displacement or internal force for structural design. However, for large-span spatial structures that are prone to dynamic instability under strong winds, such equivalent static wind loads may be inapplicable. The dynamic stability of spatial structures under unsteady wind forces is therefore studied in this paper. A new concept and its corresponding method for dynamic instability-aimed equivalent static wind loads are proposed for structural engineers. The method is applied in the dynamic stability design of an actual double-layer cylindrical reticulated shell under wind actions. An experimental-numerical method is adopted to study the dynamic stability of the shell and the dynamic instability originating from critical wind velocity. The dynamic instability-aimed equivalent static wind loads of the shell are obtained.

• 한국항공우주학회지
• /
• 제41권3호
• /
• pp.210-216
• /
• 2013

풍력터빈이 점차 대형화 되면서 로터 직경도 점차 커지고 있다. 로터 블레이드는 윈드시어와 타워 교란 효과로부터 기계적 하중을 받게 된다. 이러한 기계적 하중은 풍력터빈의 수명을 단축시킨다. 풍력터빈의 크기가 커짐에 따라 기계적 하중 완화를 위한 풍력터빈 제어 시스템 설계가 중요하다. 본 논문에서는 로터 블레이드의 기계적 하중 저감을 위한 천이영역에서의 개별 피치 제어에 대해 소개하고 IPC 성능 검증을 위해 시뮬레이션을 통하여 논의한다.

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1427-1432
• /
• 2012

풍력터빈이 점차 대형화 되면서 로터 직경도 점차 커지고 있다. 로터 블레이드는 윈드시어와 타워교란 효과로부터 기계적 하중을 받게 된다. 이러한 기계적 하중은 풍력터빈의 수명을 단축시킨다. 따라서, 풍력터빈의 크기가 커짐에 따라 기계적 하중 완화를 위한 풍력터빈 제어 시스템 설계가 중요하다. 본 논문에서는 로터 블레이드의 기계적 하중 저감을 위한 개별 피치 제어에 대해 소개하고 IPC 성능 검증을 위해 시뮬레이션을 통하여 논의한다.