• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.225-234
• /
• 2008

본 연구는 아스팔트 혼합물의 변형강도에 대한 적정 하중재하속도를 선정하기 위하여 수행하였다. 이를 위하석 직경(D) 40mm, 하단의 원형 절삭반경(r)을 10.0mm의 하중봉으로 Kim test의 하중재하속도를 분당 10mm, 30mm, 50mm, 70mm로 하여 변형강도를 측정하고 반복주행시험을 수행하여 얻어진 소성변형 특성치와의 상관관계에 대하여 회귀분석을 수행하였다. 하중재하속도별 변형강도 값은 하중재하속도가 증가함에 따라 변형강도도 증가하는 경향을 보였다. 이것은 하중재하속도가 변형강도에 미치는 영향이 큰 요소임을 알 수 있었다. 하중재하속도에 따른 변형강도와 반복주행시험 결과인 최종침하깊이 및 동적안정도와의 상관성 분석을 통해 30mm/min의 하중재하속도가 가장 적합한 것으로 나타났다. 하중 30mm/min 하중재하속도가 불가능한 시험기의 30mm/min 하중재하속도에서의 변형강도는 제안된 환산계수를 적용해야 한다.

• Structural Engineering and Mechanics
• /
• 제70권1호
• /
• pp.67-80
• /
• 2019

Strengthening with near surface mounted carbon fibre reinforced polymers (NSM-CFRP) is a strengthening technique that have been used for several decades to increase the load carrying capacity of reinforced concrete members. In Iraq, many concrete buildings and bridges were subjected to a wide range of damage as a result of the last war and many other events. Accordingly, there is a progressive increase in the strengthening of concrete structures, bridges in particular, by using CFRP strengthening techniques. Near-surface mounted carbon fibre polymer has been recently proved as a powerful strengthening technique in which the CFRP strips are sufficiently protected against external environmental conditions especially the high-temperature rates in Iraq. However, this technique has not been examined yet under repeated loading conditions such as traffic loads on bridge girders. The main objective of this research was to investigate the effectiveness of NSM-CFRP strips in reinforced concrete beams under repeated loads. Different parameters such as the number of strips, groove size, and two types of bonding materials (epoxy resin and cement-based adhesive) were considered. Fifteen NSM-CFRP strengthened beams were tested under concentrated monotonic and repeated loadings. Three beams were non-strengthened as reference specimens while the remaining were strengthened with NSM-CFRP strips and divided into three groups. Each group comprises two beams tested under monotonic loads and used as control for those tested under repeated loads in the same group. The experimental results are discussed in terms of load-deflection behavior up to failure, ductility factor, cumulative energy absorption, number of cycles to failure, and the mode of failure. The test results proved that strengthening with NSM-CFRP strips increased both the flexural strength and stiffness of the tested beams. An increase in load carrying capacity was obtained in a range of (1.47 to 4.49) times that for the non-strengthened specimens. Also, the increase in total area of CFRPs showed a slight increase in flexural capacity of (1.02) times the value of the control strengthened one tested under repeated loading. Increasing the total area of CFRP strips resulted in a reduction in ductility factor reached to (0.71) while the cumulative energy absorption increased by (1.22) times the values of the strengthened reference specimens tested under repeated loading. Moreover, the replacement of epoxy resin with cement-based adhesive as a bonding material exhibited higher ductility than specimen with epoxy resin tested under monotonic and repeated loading.

• 한국지반공학회논문집
• /
• 제23권7호
• /
• pp.77-86
• /
• 2007

실내 시험기에 의하여 3가지 타입의 지오그리드의 시공 시 손상을 압밀조건에 따라 평가하였다. 이 실험은 ENV ISO 10722-1에 근거하여 실행되었다. 우선 실험에 사용된 흙 입자의 입도분석과 함수비를 측정하였다. 그리고 내시공성에 영향을 주는 인자로서 반복하중과 지오그리드의 타입을 변화시켰다. 실험에 사용된 시료는 6, 8, 10T woven, warp-knitted, welded type의 지오그리드이다. 이 실험은 반복하중과 감소계수의 관계를 설명하기 규명하기 위하여 진행되었다. 실험 결과 반복하중은 지오그리드의 손상과 밀접한 관련이 있었다. 특히, welded type의 지오그리드의 경우는 다른 종류의 지오그리드보다 더 낮은 감소경향을 보였는데 이는 coating material 때문이다. 즉 welded type의 지오그리드는 피복 재료가 PP이나 나머지 다른 두 종류의 경우 PVC로 되어있다. 다짐 횟수 이외의 감소 계수를 측정하기 위하여 실험을 하였다. 흙 입자의 크기가 9.5mm이상 23.5mm이하인 자갈을 가지고 다시 내시공성 시험을 하였다. 시료 포설 전 흙의 다짐 횟수를 200회로 하였으며, 그 이유는 이때의 감소계수가 다른 조건보다 더 크기 때문이었다.

• Structural Engineering and Mechanics
• /
• 제32권3호
• /
• pp.459-475
• /
• 2009

This paper presents analytical methodologies for remaining life prediction of plain concrete structural components considering tension softening and size effects. Non-linear fracture mechanics principles (NLFM) have been used for crack growth analysis and remaining life prediction. Various tension softening models such as linear, bi-linear, tri-linear, exponential and power curve have been presented with appropriate expressions. Size effect has been accounted for by modifying the Paris law, leading to a size adjusted Paris law, which gives crack length increment per cycle as a power function of the amplitude of a size adjusted stress intensity factor (SIF). Details of tension softening effects and size effect in the computation of SIF and remaining life prediction have been presented. Numerical studies have been conducted on three point bending concrete beams under constant amplitude loading. The predicted remaining life values with the combination of tension softening & size effects are in close agreement with the corresponding experimental values available in the literature for all the tension softening models.

• 한국환경과학회지
• /
• 제1권2호
• /
• pp.49-57
• /
• 1992

First, We classified man-made lakes in Korea as 4-type lakes, that is, there were River-run lakes, Dendritic lakes, Reservoir-lakes, River-mouth lakes, We studied on the environmental factors of 3-type lakes except River-mouth lakes, compared these lakes with natural lakes in foreign country. Environmental factors were watershed area, lake storage, mean depth, hydraulic retention time. As a results, 3-type lakes in Korea had remarkable differences one another according to above-mentioned environmental factors. First, We recognized that River-run lakes had higher nutrient loading according to having wider watershed area than natural lakes, and had lower algal growth rate according to shorter hydraulic retention time than natural lakes. Dendritic lake had higher nutrient loading than natural lakes, longer retention time than River-run lake. Reservoir-lakes had environmental factors between Dentritic lakes and River-run lakes. Therefore, If this studies had no quantitative results about various factors, We recognized that man-made lakes in korea had different environmental factors as compared with natural lakes, and had clear classification among 3-type lakes.

• 한국환경과학회지
• /
• 제13권3호
• /
• pp.233-244
• /
• 2004

This study was conducted to evaluate water quality in the Mankyung River using multivariate analysis. The analysis data which was surveyed from January 1996 to December 2002 in Mankyung river was aquired by the ministry of environment. Twelve water quality parameters were determined on each survey. The results were summarized as follow; Water quality in the Mankyung River could be explained up to 74.90% by four factors which were included in loading of organic matter and nutrients by the tributaries(43.28%), seasonal variation(10.40%), loading of pathogenic bacteria by domestic sewage of Gapcheon (12.41%) and internal metabolism in river(8.81%). The result of cluster analysis by station was classified into three group that has different water quality characteristics. Especially, Iksan river was appeared to considerable water quality characteristics against other station. In monthly cluster analysis, three group was classified by seasonal characteristics. Also, in yearly cluster analysis, three group was classified. It is necessary to control the pollutant loadings by domestic sewage and livestock waste for water quality management of Mankyung river.

• 대한안전경영과학회지
• /
• 제13권4호
• /
• pp.25-33
• /
• 2011

Workers in logistics centers also are exposed to serious musculoskeletal disorders the same as workers in general manufacturing due to operating forklifts and other labor duties. The frequency of these work related injuries decreases, workers' job satisfaction In addition, it causes many employees questioning a job change, which is regarded as the primary factor which drops the productivity. In this paper, we conducted a survey ti perceive the correlation between work related injuries in the fields of distribution centers and job satisfaction. Furthermore we made statistical analysis with our findings. The results of our analysis showed that the frequency of work related injuries due to workers' repetitive loading and unloading work is the primary factor which lowers job satisfaction. In order to improve aforementioned problem we propose first of all loading and unloading on pallet basis, second of all automation and computerization of logistics systems, and third of all ensurinf sufficient break time.

• 전산구조공학
• /
• 제10권4호
• /
• pp.337-347
• /
• 1997

통행차량에 의한 도로교의 동적응답은 차량이나 교량의 다양한 특성에 따라 변화하는 특성을 가지고 있다. 본 연구에서는 중차량의 통행에 의한 동적응답확대계수의 확률적인 특성을 해석적인 기법으로 분석하였다. 도로교 통행차량들 중에서 대표적인 중차량인 텐덤축트럭과 세미트레일러를 대상으로 하여 동적응답확대계수를 평가하고, 이들을 동적재하시험의 결과와 비교하여 해석기법의 타당성을 검토하였다. 차량형식, 총중량, 노면조도, 재하차량수, 재하위치 등에 따른 동적응답확대계수의 확률적 특성의 변화를 분석하고 현행 시방서 기준과 비교하였다.

• 대한조선학회지
• /
• 제8권1호
• /
• pp.53-66
• /
• 1971

The effect of reinforced circular hole in a flat plate under general biaxial loading conditions is considered. The reinforcement is achieved by attaching a circular ring of uniform rectangular cross section along the boundary of the hole. This investigation includes a theoretical solution and an experimental conformation. In the theoretical analysis, Gurney's method is used to obtain a solution for the stress distribution and the solution is expressed in a general form, so that it can be applicable to the case of general biaxial loading and general values of Poisson's ratios. In the experimental work a systematic series of photoelastic models, as shown in Fig.5 and Table 1, were analyzed on polariscope. The experimental results were in good agreement with the theoretical ones, as shown in Fig.8 and 9. The conclusions derived are as follows: 1) The theoretical results, given in Eq. $(1){\sim}(5)$, are sufficient in accuracy for the engineering design purpose. 2) The stress concentration factor decreases as the ratio n increases, but not significant beyond n=3. 3) The stress concentration factor increase as the ratio m increases, but not significant below m=0.7.

• Archives of Pharmacal Research
• /
• 제28권8호
• /
• pp.988-994
• /
• 2005

The purpose of the present study was to prepare multivesicular liposomes with a high drug loading capacity and to investigate its potential applicability in the oral delivery of a peptide, human epidermal growth factor (rhEGF). The multivesicular liposomes containing rhEGF was prepared by a two-step water-in-oil-in-water double emulsification process. The loading efficiency was increased as rhEGF concentration increased from 1 to 5mg/mL, reaching approximately $60\%$ at 5 mg/mL. Approximately $47\%$ and $35\%$ of rhEGF was released from the multivesicular liposomes within 6 h in simulated intra-gastric fluid (pH 1.2) and intra-intestinal fluid (pH 7.4), respectively. rhEGF-loaded multivesicular liposomes markedly suppressed the enzymatic degradation of the peptide in an incubation with the Caco-2 cell homogenate. However, the transport of rhEGF from the multivesicular liposomes to the basolateral side of Caco­2 cells was two times lower than that of the rhEGF in aqueous solution. The gastric ulcer healing effect of rhEGF-loaded multivesicular liposomes was significantly enhanced compared with that of rhEGF in aqueous solution; the healing effect of the liposomes was comparable to that of the cimetidine in rats. Collectively, these results indicate that rhEGF-loaded multivesicular liposomes may be used as a new strategy for the development of an oral delivery system in the treatment of peptic ulcer diseases.