• Advances in concrete construction
• /
• v.11 no.5
• /
• pp.429-445
• /
• 2021

With regard to economic efficiency, composite fix beams are widely used to pass longitudinal shear forces across the interface. The current knowledge of the composite beam load-slip activity and shear capability are restricted to data from measurements of push-off. Modelling and analysis of the composite beams based on Euro-code 4 regarding to shear, bending, and deflection under differing loads were carried out using Finite Element through an efficient computer simulation and the final loading and sections capacity based on the failure modes was analysed. In bending, the section potential was increased by an improvement of the strength in both steel and concrete, but the flexural and compressive resistance growth is very weak (3.2% 3.1% and 3.0%), while the strength of the concrete has increased respectively from 25 N/mm² to 30, 35, and 40 N/mm² compared to the increment of steel strength by 27% and 21% when it was raised from 275 to 355 and 460 N/mm², respectively. It was found that the final flexural load capacity of fix beams was declined with increase in the fix beam span for both three steel strength. The shear capacity of sections was remained unchanged at constant steel strength and different length, but raised with final yield strength increment of steel sections by 29%, and 67% when it was raised from 275 N/mm² to 355 N/mm² and 460 N/mm², respectively.

• Korean Journal of Metals and Materials
• /
• v.46 no.9
• /
• pp.545-553
• /
• 2008

Dynamic deformation behavior of ultra-fine-grained pure coppers fabricated by equal channel angular pressing (ECAP) was investigated in this study. Dynamic torsional tests were conducted on four copper specimens using a torsional Kolsky bar, and then the test data were analyzed by their microstructures and tensile properties. The 1-pass ECAP'ed specimen consisted of fine dislocation cell structures elongated along the ECAP direction, which were changed to very fine, equiaxed subgrains of 300~400 nm in size as the pass number increased. The dynamic torsional test results indicated that maximum shear stress increased with increasing ECAP pass number. Adiabatic shear bands were not found at the gage center of the dynamically deformed torsional specimen of the 1- or 4-pass ECAP'ed specimen, while some weak bands were observed in the 8-pass ECAP'ed specimen. These findings suggested that the grain refinement according to the ECAP was very effective in strengthening of pure coppers, and that ECAP'ed coppers could be used without serious reduction in fracture resistance under dynamic torsional loading as adiabatic shear bands were hardly formed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.4
• /
• pp.89-100
• /
• 2011

Physical memory analysis has been an issue on a field of live forensic analysis in digital forensics until now. It is very useful to make the result of analysis more reliable, because record of user behavior and data can be founded on physical memory although process is hided. But most memory analysis focuses on windows based system. Because the diversity of target system to be analyzed rises up, it is very important to analyze physical memory based on other OS, not Windows. Mac OS X, has second market share in Operating System, is operated by loading kernel image to physical memory area. In this paper, We propose a methodology for physical memory analysis on Mac OS X using symbol information in kernel image, and acquire a process information, mounted device information, kernel information, kernel extensions(eg. KEXT) and system call entry for detecting system call hooking. In additional to the methodology, we prove that physical memory analysis is very useful though experimental study.

• Computers and Concrete
• /
• v.26 no.6
• /
• pp.467-482
• /
• 2020

This research focused on analyzing the post-fire behavior of high-performance concrete-filled steel tube (CFST) columns, with the concrete containing tire rubber and steel fibers, under axial compressive loading. The finite element (FE) modeling of such heated columns containing recycled aggregate is a branch of this field which has not received the proper attention of researchers. Better understanding the post-fire behavior of these columns by measuring their residual strength and deformation is critical for achieving the minimum repair level required for structures damaged in the fire. Therefore, to develop this model, 19 groups of confined and unconfined specimens with the variables including the volume ratio of steel fibers, tire rubber content, diameter-to-thickness (D/t) ratio of the steel tube, and exposure temperature were considered. The ABAQUS software was employed to model the tested specimens so that the accurate behavior of the FE-modeled specimens could be examined under test conditions. To achieve desirable results for the modeling of the specimens, in addition to the novel procedure described in this research, the modified versions of models presented by previous researchers were also utilized. After the completion of modeling, the load-axial strain and load-lateral strain relationships, ultimate strength, and failure mode of the modeled CFST specimens were evaluated against the test data, through which the satisfactory accuracy of this modeling procedure was established. Afterward, using a parametric study, the effect of factors such as the concrete core strength at different temperatures and the D/t ratio on the behavior of the CFST columns was explored. Finally, the compressive strength values obtained from the FE model were compared with the corresponding values predicted by various codes, the results of which indicated that most codes were conservative in terms of these predictions.

• The Journal of Economics, Marketing and Management
• /
• v.8 no.2
• /
• pp.13-17
• /
• 2020

Purpose: In modern corporate management, the establishment of a crisis management system that minimizes damage through measures used to respond to corporate crises is no longer an option. The importance of corporate reputation and brand asset management in modern enterprise management cannot be overemphasized and negative events that might arise from a number of different causes can cause brand crises. Research design, data and methodology: More than half of the questionnaire respondents were female (252 or 53%). More than a fourth of the respondents were aged 20 (122 or 26%) and the number of married participants was 196 (41%). Of the participants, 32% (153) had graduated from college. Only 18% (87) were employees and the monthly household income was 121. In this study, we conducted factor analysis in order to extract the variables that may enhance the explanation capability of each variable. For the method of factor extraction, an Eigen value of at least 1 was used as was factor loading. An analysis was performed using the Cronbach's alpha coefficient to verify the reliability of the measurement scale. Results: First, the analysis of the impact of the social responsibility activities on brand image revealed that the social, economic, philanthropic, ethical, and environmental responsibility activities significantly affected brand image, but legal responsibility activities were not statistically significant. Second, the analysis of the impact of brand image on loyalty showed that brand image had a significant impact on loyalty. Third, the analysis of the impact of social responsibility activities on loyalty showed that they had a significant impact on loyalty. Conclusions: The pro-social enterprise image is not only a brand asset that can be shared, but also a heavy proposition followed by a corresponding social responsibility, it will have to practice transparent corporate management based on clear principles through the establishment of various systems and the implementation of a strict code of conduct within the enterprise.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.1
• /
• pp.1-11
• /
• 2021

Thermal protection system structures such as double-panel structures are used on the skin of the fuselage and wings to prevent the transfer of high heat into the interior of an high supersonic/hypersonic aircraft. The thin-walled double-panel skin can be exposed to acoustic loads by high power engine noise and jet flow noise, which can cause sonic fatigue damage. In order to predict the fatigue life of the skin, the octave bandwidth SPL should be calculated as narrow bandwidth PSD or acoustic load history using interpolation method. In this paper, a method of converting the octave bandwidth SPL acoustic load into a narrow bandwidth PSD and reconstructed acoustic load history was investigated. The octave bandwidth SPL was converted to the narrow bandwidth PSD using various interpolation methods such as flat, log and linear scale, and the probabilistic characteristics and fatigue damage results were compared. It was found that average error of fatigue damage index by the log scale interpolation method was relatively small among three methods.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.137-143
• /
• 2021

In the case of residential facilities, general fire scenarios cannot be applied. Becauseit is difficult to quantify due to the types of combustibles and various fire loads. Existing research conducting surveys of combustibles, but research on fire characteristics is insufficient. Therefore, in this study, an Excel macro that can be quantified by experimenting with the HRR experiments of sofa, drawer, mattress, chair, desk and TV, which are typical combustibles. As a result of experimenting 6 loading combustibles in domestic residential facilities by using a furniture calorimeter, values of 2,391.26kW appeared from the sofa, 1,891.80kW from the drawer, 1,778.95kW from the mattress, 1,104kW from the chair, 291kW from the desk, and 135.09kW from the TV. Also, by applying the α value of the fire growth rate by classifying fire-growing speeds at NFPA 72 (National Fire Alarm Code 2007, Annex B), the mattress can be defined as Very Fast, the sofa and drawer Fast, the TV Slow, the desk Slow, and the chair Medium.

• Composites Research
• /
• v.34 no.6
• /
• pp.387-393
• /
• 2021

This paper investigated the electrical properties of multiwall carbon nanotube reinforced polydimethylsiloxane (CNT-PDMS) strain sensors with copper electrodes on the wet-etched surface. MWCNT-PDMS strain sensors were fabricated according to the wt% of MWCNT. Surfaces on the electrode area were wet-etched with various etching duration and silver epoxy adhesives were spread on the wet-etched surface. Finally, we attached the copper electrodes to the MWCNT-PMDS strain sensors. We checked the electric conductivities by the two-probe method and sensing characteristics under the cyclic loading. We observed the electric conductivity of MWCNT-PDMS strain sensors increased sharply and the scattering of the measured data decreased when the surface of the electrode area was wet-etched. Initial resistances of MWCNT-PDMS strain sensors were inversely proportion to wt% of MWCNT and the etching duration. However, the resistance changing rates under 30% strain increased as wt% of MWCNT and the etching duration increased. Decreasing rate of the electric resistance change after 100 repetitions was smaller when wt% of MWCNT was larger and the etching duration was short. This was due to the low initial resistance of the MWCNT-PMDS strain sensors by the wet-etching.

• Journal of the Korean Dietetic Association
• /
• v.28 no.2
• /
• pp.85-98
• /
• 2022

This study was conducted to identify the major dietary patterns of Korean adult men and to examine the relationship between subjective stress perception and these dietary patterns using data from the 2014~2016 Korean National Health and Nutrition Examination Survey (KNHANES). Of the 23,080 total subjects, adult men between the ages of 19 and 64 who did not take the questionnaire or answer the questions relating to depression, and cases where the daily energy intake was less than 500 kcal or more than 5,000 kcal in the Food Frequency Questionnaire were excluded. This left a total of 3,464 subjects who were included in the final analysis. We performed a factor analysis based on the yearly mean intake frequency of 41 food groups to identify the major dietary patterns. Three major dietary patterns were identified (factor loading >0.3), including the 'Healthy pattern', 'Processed meat pattern', and the 'Alcohol pattern'. The 'Healthy pattern' was characterized by higher intake of beans, tofu, vegetable, fish, and fruits. The 'Processed meat pattern' was characterized by high consumption of processed meats and instant foods. The 'Alcohol pattern' was characterized by a higher intake of alcohol. As a response to the subject's subjective perception of stress, the most answered 'a little' according to age, marital status, occupation, income, residential area, smoking status, drinking status, and exercise status. People whose diets followed the 'Processed meat' and 'Alcohol' patterns had significantly higher scores on subjective stress perception compared to people following the 'Healthy pattern'. To manage subjective stress, it is more effective to maintain health by relieving stress through a healthy method that combines healthy eating and exercise rather than following an unhealthy diet as characterized by the 'processed meat' and 'alcohol' dietary patterns.

• Journal of Korean Clinical Nursing Research
• /
• v.27 no.3
• /
• pp.279-293
• /
• 2021

Purpose: The purpose of this study was to develop a Korean nursing work environment scale for critical care nurses (KNWES-CCN) and verify its validity and reliability. Methods: A total of 46 preliminary items were selected using content validity analysis of experts on 64 candidate items derived through literature reviews and in-depth interviews with critical care nurses. 535 critical care nurses from 21 hospitals responded to the preliminary questionnaire from February to March 2021. The collected data were analysed using construct, convergent and discriminant validities, and internal consistency and test-retest reliability. Results: The 23 items in 4 factors accounted for 55.6% of the total variance were identified through item analysis and exploratory factor analysis (EFA). EFA was performed with maximum likelihood method including direct oblimin method. In the confirmatory factor analysis, KNWES-CCN consisted of 21 items in 4 factors by deleting the items that were not meet the condition that the factor loading over .50 or the squared multiple correlation over .30. This model was considered to be suitable because it satisfied the fit index and acceptable criteria of the model [𝒳²=440.47 (p<.001), CMIN/DF=2.41, GFI=.86, SRMR=.06, RMSEA=.07, TLI=.90, CFI=.91]. The item total correlation values ranged form .32 to .73 and its internal consistency was Cronbach's α=.92. The reliability of the test-retest correlation coefficient was .72 and the intra-class correlation coefficient was .83. Conclusion: The KNWES-CCN showed good validity and reliability. Therefore, it is expected that the use of this scale would measure and improve nursing work environment for critical care nurses in Korea.