• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1015-1018
• /
• 2005

This study intended to demonstrate a general system as an web server implemented by pure software solution and focused on collecting data by remote control through Internet and constructing its' control frame. To achieve these, this study suggested an optimized, low-power, ultra tiny embedded web server. When unpredictable accidents, such as heat sensor or industrial disasters, happen, it will connect sensors collecting building information each other by network and obtain final results via web porting, web hardware control or porting, or hardware test process in a boot loader on the basis of StrongARM SA-1110 processor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.203-210
• /
• 2005

A study on the hybrid micro power source for the IMT2000 application has been presented. The hybrid micro power source is composed of solar cell, super-capacitor and battery. To compensate for the pulse loader of the IMT2000 application, the super-capacitor is connected through the lithium-lon battery to absorb the pulse discharge current. The solar cell provides the additional current to compensate for the depleted current and it is controlled to operate at the maximum power point voltage. A novel maximum power point tracking method is presented to operate at the pulse discharge load conditions and verified to have superior tracking performance through experiment. The controller design for the hybrid micro power source has been presented and verified through experiment.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.265-270
• /
• 2018

This study was to measure the exposure of diesel vehicle drivers to elemental carbon (EC) as an indicator of diesel particulate matter (DPM) emitted from diesel vehicles in an underground coal mine over 3 years as per NIOSH Method 5040. Our study results (range $10{\mu}g/m^3-377{\mu}g/m^3$ for the loader drivers, $19{\mu}g/m^3-162{\mu}g/m^3$ for the SMV drivers) were similar or less than previous study results (range $5{\mu}g/m^3-2,200{\mu}g/m^3$) for normal mine operations. From this study results, it appeared that the exposures decreased in the second and the third year. It is thought that the reasons for the decreased personal DPM (EC) exposures over the 3 years were related to the following recommendations; more frequent monitoring and maintenance of the diesel vehicles and their DPM filtration systems, more consistent monitoring of the mine's ventilation system and changes of work practices such as minimizing the opening of diesel vehicle windows. An educational program on adverse health effects of exposure to DPM and use of respiratory protection (P2 respirators) also assisted in minimizing driver exposure to DPM.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.676-683
• /
• 2002

In this paper, LAN Access Point is realized by making out bluetooth protocol stack in Linux Kernel, porting Linux in an embeded system employed bluetooth module. Hardware for a general-purpose embeded system is designed and Linux Kernel is ported after deploying Bluetooth Module. Also, Boot loader for system booting and management is composed, and Kernel is modified to meet with the system. Finally, Ethernet devise driver is made out, and bluetooth protocol Stack and Lan Access Point are realized. The possibility of TCP/IP communication through LAN Access Point to PC employed Bluetooth module, which is considered as client, is evaluated. From the evaluation results, we can see that the performance in Telnet FTP, Web browsing through Bluetooth LAN Access Point is satisfactory.

• Journal of Internet Computing and Services
• /
• v.5 no.6
• /
• pp.1-10
• /
• 2004

A web robot is a software that has abilities of tracking and collecting web documents on the Internet(l), The performance scalability of recent web robots reached the limit CIS the number of web documents on the internet has increased sharply as the rapid growth of the Internet continues, Accordingly, it is strongly demanded to study on the performance scalability in searching and collecting documents on the web. 'Design of web robot based on Multi-Agent to speed up documents collection ' rather than 'Sequentially executing Web Robot based on the existing Fork-Join method' and the results of analysis on its performance scalability is presented in the thesis, For collection speedup, a Multi-Agent based web robot performs the independent process for inactive URL ('Dead-links' URL), which is caused by overloaded web documents, temporary network or web-server disturbance, after dividing them into each agent. The agents consist of four component; Loader, Extractor, Active URL Scanner and inactive URL Scanner. The thesis models a Multi-Agent based web robot based on 'Amdahl's Law' to speed up documents collection, introduces a numerical formula for collection speedup, and verifies its performance improvement by comparing data from the formula with data from experiments based on the formula. Moreover, 'Dynamic URL Partition algorithm' is introduced and realized to minimize the workload of the web server by maximizing a interval of the web server which can be a collection target.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2298-2305
• /
• 2007

Many people is studying the embedded system. The embedded system becomes a small size device. The DOM memory is using in the mobile device and small site devices. This paper proposes light-weighted Linux O.S that is running onto the DOM memory. The embedded system with the DOM must have a light-weigthed O.S due to the memory space restriction. This paper designs light-weigthed Linux O.S for the DOM memory. The new designed LILO boot loader boots the new designed light-weigthed Linux O.S as a normal Linux O.S. This paper experiments comparing the designed new light-weigthed Linux O.S with a Linux PC.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.659-666
• /
• 2009

Recently, there are several problems in space, contiguity and facility of the existing harbors issued due to the trend of enlarging the container capacity of the large container vessel, the Mobile Harbor has been proposed conceptually as an effective solution for those problems. This concept is a kind of transfer loader of the containers from the large container ship, which is a floating barge with a catamaran type in the underwater part, and so prompt maneuverability and work effectiveness. For the safe mooring of two floating bodies, a container and the mobile harbor, in the near sea apart from the quay, a robot arm mooring facility specially devised would be designed and verified through comparison study under various environmental sea condition in the inner and outer harbor. DP system (Dynamic Positioning System) using the azimuth thruster and a pneumatic fender, etc, will be considered as a next research topic for the mooring security of multi-body floaters.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.1
• /
• pp.33-41
• /
• 2019

We propose an embedded solution to design a high-speed and high-accuracy 16bit analog-digital signal processing interface for the control systems using various external analog signals. Choosing TMS320F28377D micro controller unit (MCU) featuring high-performance processing in the 32-bit floating point operation, low power consumption, and various I/O device supports, we design and build the proposed system that supports both 16-bit analog-digital converter (ADC) interface and high precision digital-analog converter (DAC) interface. The ADC receives voltage-level differential signals from fully differential amplifiers, and the DAC communicates with MCU through 50 MHz bandwidth high-fast serial peripheral interface (SPI). We port the boot loader and device drivers to the implemented board, and construct the firmware development environment for the application programming. The performance of the entire implemented system is demonstrated by analog-digital signal processing tests, and is verified by comparing the test results with those of existing similar systems.

• Journal of the Korean Society of Safety
• /
• v.35 no.6
• /
• pp.9-14
• /
• 2020

This study was to compare the sampling efficiencies for monitoring of diesel particulate matter (DPM) using two different sampling methods; In-House PVC cyclone sampling heads and commercial airborne DPM (EC) sampling heads mounted on Dorr-Oliver cyclone heads. Personal exposure levels of DPM, analysed for elemental carbon (EC) were 0.004 - 0.2 mg/m³ for the loader drivers and 0.005 - 0.34 mg/m³ for the specialised mining vehicle (SMV) drivers were similar to previous study results. The highest result (0.34 mg/m³) might be from an irregular production schedule and multiple job tasks requested. The results using the two sampling heads were not significantly different and it is thought that the In-House PVC cyclone with 37 mm quartz filter could be used in place of the commercial sampler as a preliminary screen in place of using the commercial sampler.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.196-203
• /
• 2017

The renewable energy sources can be thought of one of the major measures to reduce greenhouse gas emissions in the industries. However, the utilization technology for those sources is approaching in the different matters. One of them, thermoelectric generation might be applicable to fishing industry. A various of internal combustion engines are used in a wide range of fisheries. After the ignition process, the heat passed out from the exhaust outlet. Recycling the heat could be not only an energy source but also reduction of green gas emission. Therefore, this study was designed to verify the feasibility of generation from wasted exhaust gas and analyze the performance. The designed experiment devices were connected with a data logger and an electric loader to quantify the currency and voltage. The devices were installed in a coastal fishing vessel for a gillnet fishery. During the whole fishing trips, the amount of generation was measured by engine rpm and the fishing operation procedures including vessel operations. At the maximum 1,500 rpm in the practical range, the generation amount was 113.6 W. The amount difference in relation to connection method was within 5 W: serial connection was 111.4 W and parallel connection was 115.8 W.