• 한국전산구조공학회논문집
• /
• 제20권4호
• /
• pp.485-492
• /
• 2007

본 논문에서는 1편에서 얻어진 온도분포와 박리시간이력을 이용하여 지하박스구조물의 열응력을 산정하고 이에 기반한 열모멘트를 산청하였다. 또한 이때의 온도분포를 바탕으로 구조물의 열적비선형성을 고려한 극한모멘트를 산정하여 구조물의 내하력을 산정하였다. 그 결과 상부슬래브의 부모멘트 구간은 단면의 온도경사에 의해서 발생하는 열모멘트에 의해 지배받는 것으로 나타났다. 반면 정모멘트 구간은 박리에 의해 화염에 노출된 철근의 항복응력에 의해 지배받는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제45권1호
• /
• pp.129-144
• /
• 2013

Load-carrying capacity of combined members consisted of inner and sleeved tubes subjected to axial compression was investigated in this paper. Considering the initial bending of the inner tube and perfect elasto-plasticity material model, structural behavior of the sleeved member was analyzed by theoretic deduction, which could be divided into three states: the elastic inner tube contacts the outer sleeved tube, only the inner tube becomes plastic and both the inner and outer sleeved tubes become plastic. Curves between axial compressive loads and lateral displacements of the middle sections of the inner tubes were obtained. Then four sleeved members were analyzed through FEM, and the numerical results were consistent with the theoretic formulas. Finally, experiments of full-scale sleeved members were performed. The results obtained from the theoretical analysis were verified against experimental results. The compressive load-lateral displacement curves from the theoretical analysis and the tests are similar and well indicate the point when the inner tube contacts the sleeved tube. Load-carrying capacity of the inner tube can be improved due to the sleeved tube. This paper provides theoretical basis for application of the sleeved members in reinforcement engineering.

• Tribology and Lubricants
• /
• 제29권1호
• /
• pp.13-18
• /
• 2013

Slider bearing is a widely used load-carrying element in the industry. While a large number of studies have investigated the effect of overall surface curvature, very few have considered sinusoidal surface. Recently, consideration of surface roughness/waviness or intentional wave design has been identified as an important issue in the manufacture of hard disk driver, mechanical seal, hydraulic machine, and etc. This study investigated the load-carrying capacity of a finite-width slider bearing with a wavy surface. Film thickness ratios, length-width ratio, ambient pressure, amplitude, and partial distribution were selected as the simulation parameters. The calculation results showed that the load-carrying capacity rapidly varied at small film thickness ratio, but the waviness near the area of minimum film thickness made much more influence with an increase in film thickness ratio. As the length-width ratio of bearing was increased, ambient pressure became more influential at small film thickness ratios. Furthermore a particular partial distribution of the wavy area led to higher load-carrying capacity than did the whole distribution. Consequently, the results of this study are expected to be of use in surface micro-machining of finite-width slider bearings.

• 대한토목학회논문집
• /
• 제7권2호
• /
• pp.107-120
• /
• 1987

본(本) 논문(論文)은 실용적(實用的)인 이차(二次)모멘트 신뢰성이론(信賴性理論)을 사용하여 체계적(體系的)이며 이론적(理論的)인 내하력산정(耐荷力算定) 방법(方法)을 제안(提案)하는데 연구(硏究)의 주안점을 두고 있다. 그리고 교량내하력(橋梁耐荷力) 평가(評價)의 새로운 접근 방법을 본(本) 논문(論文)을 통하여 시도하고자 한다. 이 새로운 방법의 기본개념(基本槪念)은 극심한 주행(走行)트럭하중을 받는 교량(橋粱)의 내하력(耐荷力)의 신뢰성수준(信賴性水準)을 신뢰성지수(信賴性指數) ${\beta}$로 나타내는 데 있다. 본(本) 논문(論文)에서 제안(提案)된 내하력(耐荷力) 판정공식(判定公式)으로 몇 개의 실존교량(實存橋粱)에 대하여 적용하여 보았으며 그 결과(結果)를 현행(現行)의 내하력(耐荷力) 판정공식(判定公式)을 적용하여 얻은 결과(結果)와 비교(比較)하여 보았다. 신뢰성이론(信賴性理輪)에 기초한 교량내하력평가(橋粱耐荷力評價) 공식(公式)은 가까운 장래에 저항(抵抗)과 하중효과(荷重效果)에 대한 기초적(基礎的)인 통계자료(統計資料)가 확보되는 대로 현행(現行)의 내하력평가(耐荷力評價) 방법(方法)에 대치될 수 있을 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.319-324
• /
• 1999

This study is to investigate the properties on the load-deflection and fracture behaviors of the steel fiber reinforced concrete(SFRC) slab model specimens, Steel fibers of indent, crimp, and end hook shape were considered to reinforce the matrix under various mixing conditions and proportions. Initial cracking load, maximum load, and energy absorption capacity(load carrying capacity) of SFRC panel specimen increased with increase of steel fiber contents. And the plain concrete slab was fractured abruptly after maximum load but SRFC slabs were fractured smoothly by steel fibers in concrete matrix operated as cracking resistance force after maximum load. Indent, crimp and end hook shape steel fibers were effective in reinforcing the matrices but end hook type fiber were superior to indent and crimp type fibers.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.141-146
• /
• 1999

Recently, many existing bridges has been evaluated for maintenance and protection of collapse. In this study, field measurement according to truck loads tests on the reinforce concrete T beam bridge was carried out. Comparing the results of load test and structural analysis using the moments of inertia of gross section, crack section and effective section, and the moments of inertia of section considering depth of crack, it is conclude that the evaluation of load carrying capacity using the stress modification factor from structural analysis using the moments of inertia of gross section is more rational than using the other moments of inertia of sections.

• Tribology and Lubricants
• /
• 제15권1호
• /
• pp.24-28
• /
• 1999

This paper describes a new pivoting technique to improve bearing performance in pivoted pad thrust bearings. This new technique adjusts the pivot line in a line pivoted pad thrust bearing to be parallel to the trailing edge of a sector shaped pad. Bearing performance factors such as load carrying capacity, frictional torque and flow rate are numerically investigated for conventional point-pivoted and line-pivoted pads and for the new parallel-line pivoting technique. It is shown that the load carving capacity can be maximized with the new technique.

• Steel and Composite Structures
• /
• 제29권6호
• /
• pp.735-748
• /
• 2018

In this paper, the cyclic behavior of steel beam-concrete encased steel (CES) column joints was investigated experimentally and numerically. Three frame middle joint samples with varying concrete slab widths were constructed. Anti-symmetrical low-frequency cyclic load was applied at two beam ends to simulate the earthquake action. The failure modes, hysteretic behavior, ultimate load, stiffness degradation, load carrying capacity degradation, displacement ductility and strain response were investigated in details. The three composite joints exhibited excellent seismic performance in experimental tests, showing high load-carrying capacity, good ductility and superior energy dissipation ability. All three joint samples reached their ultimate loads due to shear failure. Numerical results from ABAQUS modelling agreed well with the test results. Finally, the effect of the concrete slab on ultimate load was analyzed through a parametric study on concrete strength, slab thickness, as well as slab width. Numerical simulation showed that slab width and thickness played an important role in the load-carrying capacity of such joints. As a comparison, the influence of concrete grade was not significant.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권6호
• /
• pp.89-96
• /
• 2018

교량 시설물은 사회적으로 중요한 기반 시설물로서 공용기간 동안 안전한 관리가 중요하다. 도로교량의 많은 비율을 차지하고 있는 강박스거더교량의 경우 허용응력설계법으로 설계되고 내하력이 평가되어 왔으나, 최근 한계상태설계법으로 설계기준이 변경되었음에도 불구하고 내하력 평가에서는 아직까지 허용응력법을 대부분 사용하고 있는 실정이다. 이에 이 연구에서는 2 가지 설계 방법을 이용하여 다수의 교량에 대한 내하율 평가 결과를 비교하고, 기존의 허용응력법에 의한 내하력을 한계상태법에 의한 내하력으로 환산하는 방법을 모색하고자 하였다. 이 결과는 추후 교량을 관리함에 있어 보강 필요성 판단 및 한계상태법에 의한 내하력 평가에 기초자료로 활용될 수 있을 것으로 기대된다.

• 한국지반공학회논문집
• /
• 제25권11호
• /
• pp.75-86
• /
• 2009

본 논문에서는 쇄석말뚝의 하중 지지력 향상을 위해 지오그리드를 이용하여 주면을 감싸는 일명 "지오그리드 보강 쇄석말뚝"의 하중지지특성에 관한 내용을 다루었다. 이를 위해 지오그리드 감쌈 쇄석말뚝의 근본적인 기능인 배수 효과와 지오그리드 보강 효과를 현실적으로 모사할 수 있는 3차원 응력-간극수압 수치해석 모델을 이용하여 재하하중에 대한 다양한 시공조건에 대한 매개변수 해석을 수행하고 그 결과를 분석하였다. 그 결과, 기존의 연구에서 발표된 성토 하중 조건에서 확인할 수 있었던 장기 하중지지력 향상 효과와 유사하게 재하하중 조건에서도 지지력이 현저히 향상하는 결과를 확인할 수 있어 지오그리드 보강 쇄석말뚝 공법은 연약지반 성토시 적용성 뿐만 아니라 구조물 기초로도 활용성을 확보할 수 있는 것으로 검토 되었다. 해석 결과는 지오그리드 보강 쇄석말뚝의 하중지지력과 영향 인자간의 관계 설정이 가능하도록 제시하였으며 현장적용성 측면에서의 고찰을 시도하였다.