• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.85-91
• /
• 1996

An analysis for turbulent hybrid beatings with fluid inertia and swirl injection effect was derived for studying static characteristics of swirl-controlled hybrid journal. The swirl-controlled hybrid journal beating is considered to have more freedom in stability control in high speed rotating machinery. Current analysis is compared with experimental results with 3-recess hydrostatic journal bearing. The analysis revealed that the fluid momentum exchange at orifice discharge could produce pressure rise inside the recess region which can control the shear flow induced by journal rotation. The analysis also shows that the swirl-controlled hybrid journal beating has a capability of controlling load carrying capacity and stability by manipulating supply pressure and injection angle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.249-254
• /
• 1992

Hydrostatic Bearings have been applied to ultra high precision machine tools and precision instruments, because of their low friction characteristic, high load carrying capacity and high moving accuracy at all range of speed. In regard to realizing the Hydrostatic Bearing, various restrictors such as capillary, orifice, diaphram valve, spool valve, and etc can be used. However, their stiffness and flexibility are not sufficient in practical use for ultra precision machine tool elements. In this study dynamic equations were derived and the dynamic characteristics were simulated for both orifice and flow control servo valve. Simulation was carried out on the condition that static and sinusoidal dynamic loads were applied to the table of CNC jig Boring machine. The simulation results indicate the improvement of the performance of the Bearing system when flow control servo valve has been used as restrictor of Hydrostatic Bearing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.15-17
• /
• 1994

The economic operation in power systems has long been in keen interests for power system engineers. The classical equal incremental fuel cost rule is still the basis for it, even though more elaborate tools such as optimal power flow have been developed already. The classical method requires usually many iterations, while the optimal power flow shows often some difficulties. This paper suggests a single step solution based on the classical method revisited. The concept is shown graphically. Three sample systems are compared. The proposed approach has shown a single step solution regardless system sizes, while the conventional methods require many iterations.

• 한국지능시스템학회논문지
• /
• 제8권5호
• /
• pp.29-38
• /
• 1998

본 논문에서는 부하외란이 발생할 경우 2지역 전력계통의 부하주파수 제어 즉, 각 지역내의 주파수 및 연계선 조류편차가 허용치 내로 신속히 수렴하도록 하기 위하여 신경회로망 자기동조 PID 제어기를 제안하였다. 시뮬레이션에 사용된 신경회로망은 입력층에 2개, 중간층에 10개, 출력층에 3개의 뉴런으로 구성하였다. 2개의 입력층 뉴런은 시스템의 오차와 오차 변화율이 입력되게 하였고 출력층은 PID 제어기의 파라미터에 해당하는 3개의 뉴런으로 구성하였다.시뮬레이션 결과 본 논문에서 제안한 신경회로망 자기동조 PID 제어기는 종래의 제어기법(Optimal, PID)보다 동특성 응답과 제어 성능이 우수한 제어기임을 알 수 있었다.

• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.63-70
• /
• 2011

In the present study, we developed optimal heat supply algorithm which minimizes the heat loss through the distribution pipe line in group energy apartment. Heating load variation of group energy apartment building in accordance with outdoor air temperature was predicted by the correlation obtained from calorimeter measurements of whole households of apartment building. Supply water temperature and mass flow rate were conjugately controlled to minimize the heat loss rate through distribution pipe line. Group heating apartment located in Hwaseong city, Korea, which has 1,473 households divided in 4 regions, was selected as the object apartment for verifying the present heat supply control algorithm. Compared to the original heat supply system, 10.4% heat loss rate reduction can be accomplished by employing the present control algorithm.

• 전기전자학회논문지
• /
• 제25권3호
• /
• pp.425-429
• /
• 2021

커넥티드 기반 자율주행 시스템에서 차량의 군집주행은 중앙 시스템의 계산량과 네트워크 트래픽 로드를 크게 감소시켜 줄 뿐만 아니라 교통흐름을 개선하는 효과도 얻을 수 있는 효율적인 교통운영모델이다. 효율적인 군집주행집단 관리를 위해서는 군집의 규모를 적절하게 유지하는 것이 중요하며 이를 위한 신규차량 및 타 군집 소속 차량의 효율적인 병합 제어가 필수적이다. 본 연구에서는 군집의 현재 규모와 차량의 우선순위에 따라 병합 요청을 수락 또는 거절하는 병합 제어 방안을 제시한다. 제안하는 방안은 마코프 체인 기반의 수학적 분석모델을 이용해 분석하고 검증하었다. 성능평가 결과 제안한 방안이 중앙 시스템의 부하를 적절하게 잘 관리하는 것을 확인할 수 있었다.

• 설비공학논문집
• /
• 제23권5호
• /
• pp.334-341
• /
• 2011

In the present study, optimal heat supply algorithm which minimize the heat loss through the distribution pipe line in group energy apartment was developed. Variation of heating load of group energy apartment building in accord with the outdoor air temperature was predicted by the heating load-outdoor temperature correlation. Supply water temperature and mass flow rate were controlled to minimize the heat loss through distribution pipe line. District heating apartment building located in Hwaseong city, which has 1,473 households, was selected as the object building for testing the present heat supply a1gorithm. Compared to the previous heat supply system, 10.4% heat loss reduction can be accomplished by employing the present method.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1454-1470
• /
• 2014

This paper propose a new power conditioner topology with intelligent power management controller that integrates multiple renewable energy sources such as solar energy, wind energy and fuel cell energy with battery backup to make best use of their operating characteristics and obtain better reliability than that could be obtained by single renewable energy based power supply. The proposed embedded controller is programmed for maintaining a constant voltage at PCC, maximum power point tracking for solar PV panel and WTG and power flow control by regulating the reference currents of the controller on instantaneous basis based on the power delivered by the sources and load demand. Instantaneous variation in reference currents of the controller enhances the controller response as it accommodates the effect of continuously varying solar insolation and wind speed in the power management. The power conditioner uses a battery bank with embedded controller based online SOC estimation and battery charging system to suitably sink or source the input power based on the load demand. The simulation results of the proposed power management system for a standalone solar/WTG/fuel cell fed hybrid power supply with real time solar radiation and wind velocity data collected from solar centre, KEC for a sporadically varying load demand is presented in this paper and the results are encouraging in reliability and stability perspective.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권10호
• /
• pp.509-515
• /
• 2000

This paper addresses a damping control strategy of Static Synchronous Series Compensator(SSSC) and analysis model for stability study. The effect of injected voltage source generated by SSSC is modelled as equivalent load. This model is thought to be reasonable for the stability study because the dynamics of SSSC is very fast compared with that of power system. Damping controller of SSSC is based on Transient Energy Function method. The proposed control strategy is insensitive to the operating conditions like power flow level because control law depends on the phase angles. The proposed analysis model and control strategy was confirmed by WSCC 9 bus system and two area system. Especially, the robustness of proposed control strategy is demonstrated with respect to multiple operating conditions in two area system.

• Structural Engineering and Mechanics
• /
• 제48권6호
• /
• pp.879-914
• /
• 2013

In part I of the article, formulation and characteristics of the several well-known structural geometrical nonlinear solution techniques were studied. In the present paper, the efficiencies and capabilities of residual load minimization, normal plane, updated normal plane, cylindrical arc length, work control, residual displacement minimization, generalized displacement control and modified normal flow will be evaluated. To achieve this goal, a comprehensive comparison of these solution methods will be performed. Due to limit page of the article, only the findings of 17 numerical problems, including 2-D and 3-D trusses, 2-D and 3-D frames, and shells, will be presented. Performance of the solution strategies will be considered by doing more than 12500 nonlinear analyses, and conclusions will be drawn based on the outcomes. Most of the mentioned structures have complex nonlinear behavior, including load limit and snap-back points. In this investigation, criteria like number of diverged and complete analyses, the ability of passing load limit and snap-back points, the total number of steps and analysis iterations, the analysis running time and divergence points will be examined. Numerical properties of each problem, like, maximum allowed iteration, divergence tolerance, maximum and minimum size of the load factor, load increment changes and the target point will be selected in such a way that comparison result to be highly reliable. Following this, capabilities and deficiencies of each solution technique will be surveyed in comparison with the other ones, and superior solution schemes will be introduced.