• 한국해양학회지:바다
• /
• 제19권2호
• /
• pp.155-163
• /
• 2014

마산만 표층퇴적물에서 미량금속의 오염도 및 잠재적 생태계 위해도를 평가하기 위하여 미량금속(Cu, Pb, Zn, Cd, Ni)의 총 농도 및 화학적 존재형태를 분석하였다. 미량금속의 농도는 Ni을 제외한 모든 금속이 만의 내측에 위치한 마산항 주변에서 높게 나타났다. 미량금속의 화학적 존재형태 중 Cd과 Pb은 비잔류 부분이 각각 92%, 88%로 인위적 기원에 의해서 주로 공급되는 것으로 나타난 반면, Ni은 잔류 부분이 70%로 주로 자연적 기원에 의해서 공급된 것으로 나타났다. 미량금속의 오염도 및 생태계 위해도를 다양한 지수로 평가한 결과, pollution load index (PLI)는 만의 바깥쪽 정점을 제외한 모든 정점에서 1을 초과하여 인위적 오염 상태를 보였다. Ecological risk index (ERI)는 만의 내측에서 considerable 또는 moderate risk 수준이었으며, 만의 바깥쪽에서는 low risk 수준이었다. Cd의 ecological index (Ei) 값은 대부분의 정점에서 높게 나타났으며, Cd이 산가용성 부분에서 가장 높은 농도를 보여 Cd이 마산만에서 저서생물에게 잠재적으로 높은 위해도를 미칠 것으로 판단된다.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.261-271
• /
• 2003

본 연구에서는 다단계 하중 Falling Weight Deflectometer를 사용하여 도로기초의 상태를 평가하는 방법을 제시하였다. 응력의존 재료모델을 포함한 동적 유한요소법을 활용하여 가상의 처짐과 응력/변형률 데이터베이스를 구축하였다. 이러한 가상의 데이터베이스를 바탕으로 표면처짐 및 보조기층 또는 노상의 중요한 위치에서 발생하는 응력/변형률과의 관계를 제시하였다. 미국의 LTPP와 노스캐롤라이나 주도로국에서 실시한 FWD 처짐값, 동적관입시험 결과, 그리고 반복하중 탄성계수시험을 활용하여 평가방법을 개발하였다. 특히 본 연구는 FWD 하중크기가 상태평가 방법에 미치는 영향에 대하여 연구의 초점을 맞추었다. 연구결과, 구조적으로 수정된 보조기층 손상지수와 보조기층 곡률지수가 각각 보조기층과 노상토의 강성도 특성을 예측할 수 있는 좋은 인자들로 판단되었다. 66.7kN 또는 그 보다 작은 하중은 예측의 정밀도를 높이는데 부족하였다. 도로기초의 비선형 거동에 대한 연구결과, 다단계 하중으로부터 발생하는 처짐비는 도로기초 재료의 종류와 상태를 판단할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제66권4호
• /
• pp.445-452
• /
• 2018

In this paper the effects of particle size and model scale of concrete have been investigated on point load index, tensile strength, and the failure processes using a PFC2D numerical modeling study. Circular and semi-circular specimens of concrete were numerically modeled using the same particle size, 0.27 mm, but with different model diameters of 75 mm, 54 mm, 25 mm, and 12.5 mm. In addition, circular and semi-circular models with the diameter of 27 mm and particle sizes of 0.27 mm, 0.47 mm, 0.67 mm, 0.87 mm, 1.07 mm, and 1.27 mm were simulated to determine whether they can match the experimental observations from point load and Brazilian tests. The numerical modeling results show that the failure patterns are influenced by the model scale and particle size, as expected. Both Is(50) and Brazilian tensile strength values increased as the model diameter and particle sizes increased. The ratio of Brazilian tensile strength to Is(50) showed a reduction as the particle size increased but did not change with the increase in the model scale.

• 펄프종이기술
• /
• 제31권1호
• /
• pp.46-51
• /
• 1999

The most important effect of refining is believed as the internal fibrillation. The internal fibrillation is the separation of the fiber wall into several lamellae. The internal fibrillation results in fiber swelling as water penetrates the fiber wall. The increase in paper strength as a result of refining was due to delamination which made the fiber more flexible. Pulp fibers are refined to 20, 40, and 70$^{\circ}$SR freeness at Valley beater. Changes of Physical paper properties are analyzed depending on fiber wall thickness and fiber's collapse index at 2.5 and 5.6kg$_f$ refining load. At same $^[\circ}$SR freeness with 2.5kg$_f$ refining load, fiber wall thickness is increased further than at high 5.6kg$_f$ refining load. With higher fiber wall thickness by lower intensity refining load, higher internal fibrillation, flexibility, collapsability of fibers are achieved. Those effects improve WRV, tensile strength, and burst strength. Tear strength shows opposite trend to tensile and burst strength as usual.

• 대한조선학회논문집
• /
• 제31권1호
• /
• pp.142-154
• /
• 1994

본 논문에서는 정하중을 받는 보강 원통형 쉘의 확률론적 초기결함 민감도 해석을 수행하였다. Donnell의 쉘이론, Galerkin 근사법에 의거 좌굴하중 도출을 위한 다중모드 정식화를 수행하고 이에 random한 기하학적 초기결함의 확률장 이론 및 응답면 기법을 결합하였다. 계산된 확률론적 좌굴하중 결과로부터 신뢰도 지수-하중, 신뢰도 지수-안전계수의 관계를 구할 수 있고 이를 이용하면 요구되는 안전계수의 범위, 허용가능 초기결함의 범위 설정이 가능할 것이다.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.458-465
• /
• 2018

Ice-going ships such as icebreakers, icebreaking tankers, and icebreaking LNG carriers are subjected to wave loads in open water and ice loads in ice-covered water. In terms of the ship's structural design, the local ice load is important. The fatigue failure due to repeated ice loads is also important. ISO 19906 specifies the assessment of the fatigue limit for a polar offshore structures. In addition, Lloyd's Register refers to fatigue damage based on ShipRight FDA ICE. In ShipRight FDA ICE, the fatigue damage indices due to wave and ice loads are simply presented as 0.5 for each load. It also states that the sum of the two fatigue damage indices should not exceed one. This study calculated and analyzed the fatigue damage index and fatigue life considering ARAON's voyage schedules and the assumed Antarctic voyage based on data measured during the Arctic voyage of ARAON in 2010.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.26-32
• /
• 2010

This paper proposes a new effective installed reserve rate in order to evaluate reliability of power system considering renewable generators, which include uncertainty of resource supply. It is called EIRR(effective installed reserve rate) in this paper. It is developed with considering capacity credit based on ELCC by using LOLE reliability criterion. While the conventional installed reserve rate index yields over-evaluation reliability of renewable generators, the proposed EIRR describes actual effective installed reserve rate. However, it is not the probabilistic reliability index as like as LOLE or EENS but another deterministic effective reliability index. The proposed EIRR is able to evaluate the realistic contribution to the reliability level for power system considering wind turbine generators and solar cell generators with high uncertainty in resource supply. The case study in model system as like as Jeju power system size presents a possibility that the proposed EIRR can be used practically as a new deterministic reliability index for generation expansion planning or operational planning in future.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1066-1073
• /
• 2013

This paper illustrates newly an outage cost impact index function(OCIIF). The assessment of the OCIIF is described using the Web Based Online Real-time Outage Cost Assessment and Information System(WOROCAIS) for power system outage cost assessment in Korea. The proposed OCIIF is not absolute but relative outage cost impact index function in view point of outage time using web based survey method for outage cost assessment. While conventional methodology does not consider short time outage cost assessment, the proposed OCIIF reflects short time outage. SCOF(Sector Customer Outage Function) in stead of the traditional SCDF(Sector Customer Damage Function) is defined and proposed newly in this paper. Based the SCOF, AVLL(Average Value of Loss Load) is newly proposed. The OCIIF is demonstrated by WOROCAIS in case study around 2,000 sample data surveyed by KEPCO in South Korea in recent.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.367-382
• /
• 2015

This paper aims to conduct the reliability-based assessment of the welded joint in the orthotropic steel bridge deck by use of a mesh-insensitive structural stress (MISS) method, which is an effective numerical procedure to determine the reliable stress distribution adjacent to the weld toe. Both the solid element model and the shell element model are first established to investigate the sensitivity of the element size and the element type in calculating the structural stress under different loading scenarios. In order to achieve realistic condition assessment of the welded joint, the probabilistic approach based on the structural reliability theory is adopted to derive the reliability index and the failure probability by taking into account the uncertainties inherent in the material properties and load conditions. The limit state function is formulated in terms of the structural resistance of the material and the load effect which is described by the structural stress obtained by the MISS method. The reliability index is computed by use of the first-order reliability method (FORM), and compared with a target reliability index to facilitate the safety assessment. The results achieved from this study reveal that the calculation of the structural stress using the MISS method is insensitive to the element size and the element type, and the obtained structural stress results serve as a reliable basis for structural reliability analysis.

• 한국지반공학회논문집
• /
• 제23권11호
• /
• pp.15-26
• /
• 2007

L. A. 마모율 시험은 건설용 골재의 강도를 확인하기 위한 방법으로 주로 석산의 모암을 대상으로 시행하여 왔다. 본 연구는 경상분지 퇴적암이 집중 분포되어 있는 25 지점에서 지질학적 특성을 대표할 수 있는 324 브록의 시료를 채취하여 L. A. 마모율시험으로 각종 공학지수(일축 압축강도, 압열 인장강도, 탄성계수, 점하중 강도지수, Schmidt 해머 반발지수)를 추정하기 위한 실험을 시행하여 회귀 분석법으로 서로간의 상관성을 확인한 결과, 상호간 좋은 상관관계가 있음을 확인하였다. 이 방법이 다른 공학지수를 추정함에 손색이 없으므로 이후에도 많은 활용이 있기를 기대한다.