• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.343-349
• /
• 2020

As global warming accelerates due to global climate change, the International Maritime Organization(IMO) has set up Emission Control Area(ECA) and encourages the use of Liquefied Natural Gas(LNG). For this reason, as the demand for LNG increases, the demand and research of related equipment also increases. In this study, one of them, the vent mast for the discharge of LNG was studied. In general, vent mast receives various loads such as wind load, earthquake load and dead load during operation. Accordingly, consideration of these loads is essential for structural design and safety evaluation of the vent mast. In this study, the structural safety of the vent mast is evaluated by performing finite element analysis. As a result, the structural safety evaluation results were analyzed based on the database of materials of the vent mast, and the stress level was analyzed to provide a design guide.

• Ocean and Polar Research
• /
• 제42권4호
• /
• pp.293-301
• /
• 2020

Blades of tidal stream turbines have to sustain many different loads during operation in the underwater environment, so securing their structural safety is a key issue. In this study, we focused on periodic loads due to wave orbital motion and propose a load reduction method with a blade design. The flap of an airplane wing is a well-known structure designed to increase lift, and it can also change the load distribution on the wing through deflection. For this reason, we adopted a passive flap structure for the load reduction and investigated its effectiveness by an analytical method based on the blade element moment theory. Flap torsional stiffness required for the design of the passive flap can be obtained by calculating the flap moment based on the analytic method. Comparison between a flapped and a fixed blade showed the effect of the flap on load reduction in a high amplitude wave condition.

• 풍력에너지저널
• /
• 제13권4호
• /
• pp.90-97
• /
• 2022

In this paper, a study on the vibration characteristics of the pitch gearbox of 8 MW large capacity wind turbines was conducted. The vibration analysis method of the pitch gearbox was proposed by combining the planetary gear train vibration model with the housing and carrier finite element model using the substructural synthesis method. We modeled the vibration excitation source for mass unbalance, gear mesh frequency, and bearing defect error action on the pitch gearbox, and performed a critical speed analysis. As a result of analyzing the critical speed of the pitch gearbox, the critical speed for the excitation source did not occur within the operation speed (84.87 rpm). In addition, as a result of applying 10 %, 20 %, …, 100 % of the largest load duration distribution (LDD) load, it was found that the bearing stiffness and the primary natural frequency were larger as the LDD load was larger. The primary natural frequency was 81.47 Hz for the lowest load among LDD data, which exceeded an operating speed of 84.87 rpm (5.09 Hz), so it was found that vibration caused by the change of LDD load did not occur in the operating speed range.

• 한국경영과학회지
• /
• 제26권1호
• /
• pp.71-85
• /
• 2001

This paper considers a cost model for a U-shaped manufacturing cell formation which incorporates a required number of machines and various material flows together under multi-part multi-cell environment. The model is required to satisfy both the specified operation sequence of each part and the total part demand volume, which are considered to derive material handling cost in U-shaped flow line cells. In the model several cost-incurring factors including set-up for batch change-over, processing time for operations of each part, and machine failures are also considered in association with processing load and capacity of each cell. Moreover, a heuristic for a good machine layout in each cell is newly proposed based on the material handling cost of each alternative sequence layout. These all are put together to present an efficient heuristic for the U-shaped independent-cell formation problem, numerical problems are solved to illustrate the algorithm.

• 대한안전경영과학회지
• /
• 제19권3호
• /
• pp.117-122
• /
• 2017

Companies are reluctant to disclose information because of trade secret and corporate identity For the same reasons, logistics companies do not want to operate in the form of a community In urban areas, the loading of vehicles is 100% as the quantity of goods transported is too much. In mountain areas, however, the load condition of the vehicle is not 100% because of the low quantity of goods transported Therefore, the transportation costs will increase as the cost of transport increase, the competitiveness of firms will also decline In this paper, we studied a simulation to measure driving time and volume of cargo according to the change of the quantity of goods transported in the mountain area According to the research results, we got a conclusion that the proposed method makes the operation time be less and the volume of cargo increase compared with the existing operation method.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권7호
• /
• pp.333-340
• /
• 2002

To secure a service continuity is one of the most important mission in the ower distribution system operation. In this paper the necessary and sufficient condition to guarantee 100% service restoration capability for any fault on the system is reported. An evaluation methodology of the restoration capability(or restorability) is developed based on the developed restoration conditions. Applications of the developed concept to the system operation in the normal and emergency states, that would enhance the supply reliability of the system are described. They include enhancement of restoration capability adapting to load change, identification of best open switch and supervised switch positions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1601-1602
• /
• 2007

Steam stop valves of steam turbine in the power plant are at their 100% position and have no movements. Steam control valves, ie governor valves have no movements either at their controlling position on load limit operation. By the way, if there were no change of operation state, steam valves could be sticked mechanically. Because the governor could fail in protecting and controlling steam turbine in case of emergency conditions, the closing test of 100% valve travel must be accomplished periodically for the purpose of testimony of their good conditions. And, As the difference between steam turbine structures exists according to the manufacturer or generation capacity, both steam stop valves and steam control valves differes in structure and operation method. Therefore, it is essential for not only turbine protection but also control for the control engineers to find out composition of steam valves and method of closing test.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 춘계학술대회 및 임시총회
• /
• pp.256-259
• /
• 2002

Recently, most vehicles has the Automatic transmission system as their transmission system. The automatic transmission system operates with fixed shift patterns. In the opposite of manual operation, it is easy and convenient for driving. Though these merit, the system can not evaluate the driver's intension because of usage of firmed shift pattern. Especially, when the load has declination the AT system must operate for engine break effect. Namely, if the vehicle drives on the load of decrease, the acceleration of the vehicle goes to high then. At that time, the shift goes to down position the vehicle has some negative acceleration with the resistance of engine. To consider driver's intension in this case, we must consider both the driving intensity of driver and the status of load. In this paper, we developed flexible automatic transmission system by using the proposed moduled neural networks which can learn the status of the load and driver's intensity As a result, we compare the transmission system using firmed shift pattern and the proposed transmission system and show the good performance in the change of shift position.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.397-403
• /
• 2016

Generally, an electrical distribution configuration is a radial system with one-way current in a distribution management system (DMS). All feeders in a DMS have tie-switches to make radial system. Sometimes, DMS should change a tie-switch for operation. In that case, the tie-switch has to be closed first; then a switch is opened as another tie-switch in order to prevent blackout for customers. At the moment when the tie-switch is closed, distribution system is operated in a loop state, not radial. Before the loop operation, DMS operator has to check any expected events for stable distribution system operation; and the most important event is a mis-operation of a protection relay. In addition, DMS operator should check voltage profile violation but a calculation method of section voltages had not been used. Thus, this paper proposes a calculation method of section voltages at a loop operation in a DMS. The proposed calculation algorithm is verified by Matlap Simulink.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1370-1378
• /
• 2007

고속철도 교량은 고속주행 열차의 차축 주기하중 효과와 교량 고유의 동적특성에 의한 동적 증폭 효과로 인하여 구조물의 안전성에 영향을 받는다. 그리고 교량의 과도한 변형으로 인하여 차륜과 레일의 접촉력 감소, 궤도틀림 등의 윤중 변동이 일어나 열차의 주행안전성 및 승차감을 저해할 수 있다. 이러한 궤도 안전성을 확보하기 위하여 동적거동에 대한 교량상판수준의 수직가속도 제한, 차륜-레일간의 접촉과 열차주행 안전성 확보를 위한 상판 면틀림 제한, 단부 회전각 변위 제한, 차량하중에 의한 교량의 수직 처짐 제한을 반드시 만족시켜야 하며, 필수적으로 공진에 대한 검토도 이루어져야 한다. 신설되는 호남고속철도에서는 기존의 경부고속철도와 다른 콘크리트 도상을 적용하고, 궤도간격, 설계열차하중 등이 변경되어 적용되므로 새로운 동적안정성 요구조건을 적용하게 된다. 본 연구에서는 콘크리트교량에 비해 진동특성이 취약한 것으로 알려진 강합성 거더 고속철도 교량의 동적거동 분석을 수행하였다.