• Journal of Industrial Technology
• /
• v.8
• /
• pp.13-21
• /
• 1988

For the improvement of productivity of Pleurotus ostreatus, the production of liquid spawn was studied. The highest liquid spawn production was obtained after shaking culture for 4 days in the culture medium containing 5%(W/V) wheat flour, 0.2%(W/V) yeast extract, 0.1%(W/V)$KNO_3$ 0.05% (W/V) $MgSO_4{\cdot}7H_2O$, 0.05%(W/V) $KH_2PO_4$. The optimum pH and temperature was 7.0 ana $30^{\circ}C$. The period required to complete the mycelial growth after spawning were 28, 22, 10 and 9 days, respectively, when the 2%(V/V) of solid spawn and 2%(V/V), 5% (V/V) and 10%(V/V) of liquid spawn were inoculated. The days required from spawning to fruiting bodies were 38, 34, 28 and 27 days.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.1
• /
• pp.39-46
• /
• 2002

It is very difficult to measure an exact thrust in liquid rocket engine compared to solid rocket motor, however it is very important to estimate a performance of engine for developing rockets. To get a good result, we have to concern about errors of measurement and find a method of calibration. In this research, we developed new thrust measurement system for liquid rocket engine.

• Nuclear Engineering and Technology
• /
• v.14 no.1
• /
• pp.10-16
• /
• 1982

The significant structure theory of liquids has been successfully applied to liquid gallium. In this work, we have assumed that two structures exist simultaneously in liquid gallium. One is considered as loosely close packed $\beta$-Ga-like structure and the other is the remainder of solid $\alpha$-Ga or $\alpha$-Ga-like structure. This two structural model is introduced to construct the liquid partition function. Using the partition function, the thermodynamic and transport properties are calculated over a wide temperature range. The calculated results are quite satisfactory when compared with the experimental results.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.8
• /
• pp.841-850
• /
• 1997

A simple molecular theory of mixtures is formulated based on the nonrandom two-fluid lattice-hole theory of fluids. The model is applicable to mixtures over a density range from zero to liquid density. Pure fluids can be completely characterized with only two molecular parameters and an additional binary interaction energy is required for a binary mixture. The thermodynamic properties of ternary and higher order mixtures are completely defined in terms of the pure fluid parameters and the binary interaction energies. The Quantitative prediction of vapor-liquid, and solid-vapor equilibria of various mixtures are demonstrated. The model is useful, in particular, for mixtures whose molecules differ greatly in size. For real mixtures, satisfactory agreements are resulted from experiment. Also, the equation of state (EOS) is characterized well, even the liquid-liquid equilibria behaviors of organic mixtures and polymer solutions with a temperature-dependent binary interaction energy parameter.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.24-32
• /
• 1984

In order to process instant foods which hold appropriate moisture contents and soft texture, four kinds of retort pouched seasoned-oyster products were prepared as control, seasoned products, solid smoked and liquid smoked product after seasoning and their processing conditions and quality stability during 100 days of storage were investigated. The optimum processing conditions of retort pouched seasoned-oyster product were as follows ; namely, raw oyster was seasoned at $105^{\circ}C$ for 10 min with seasoning solution prepared from sugar, sorbitol, salt, monosodium glutamate and 5'-ribonucleotide and then dipped for 30 seconds in Smoke-EZ solution(Alpha Foods Co., Ltd.) after predried for 30 min in hot-air drier. After. smoking, the seasoned and liquid smoked oyster was dried at $40-42^{\circ}C$ for 2.5 hours, vacuum packed in plastic film bag, and sterilized in a hot water circulating retort at $120^{\circ}C$ for 16 min. Comparing their quality before and after sterilization, TBA value of all the products after sterilization slightly decreased and among texture profiles hardness, toughness and chewiness slightly decreased, while elasticity and cohesiveness were rarely changed. Color value (a value) of the product treated with solid smoke or liquid smoke increased after sterilization. During storage pH, VBM and water activity of all products changed little and TBA values of the solid smoked product and liquid smoked one were lower than that of the others. Viable cell count was negative and texture changed little during storage. As for color difference during storage, green meat appeared on the surface of control and seasoned product after 15 days storage, while the masking of green meat could achieved by solid and liquid smoking treatment. And liquid smelling treatment was more effective than solid smoking. As a conclusion, retort pouched seasoned-oyster product treated with liquid smoke kept their good quality during 100 days storage and it seemed to be consumed as one of the instant foods which hold appropriate moisture contents and soft texture.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.7
• /
• pp.647-653
• /
• 2013

The evaporation characteristics of nanofluid droplets on a heated solid surface were experimentally investigated. The experiments were conducted using pure water and a nanofluid of water mixed with CuO nanoparticles, and the solid surface was made of a copper block heated by a nine cartridge heater. The experimental results showed that the evaporation rate of the nanofluid droplet was higher than that of the pure water droplet on the heated solid surface because nanoparticles increased the thermal conductivity of the nanofluid. Furthermore, it was found that the evaporation rate of the nanofluid droplet increased with the solid surface roughness. This may be because the actual area of the liquid-solid interface increased with the solid surface roughness.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.276-280
• /
• 2007

In this work, caffeine and some catechin compounds + C, EC, EGC, and EGCG were extracted from green tea by using molecular imprinted polymers (MIP) as sorbent materials in a solid-phase extraction (SPE) process known as MISPE (molecular imprinted solid-phase extraction). For synthesis of MIP, caffeine was employed as the template, MAA as the monomer, EGDMA as the crosslinker, and AIBN as the initiator. A solution of caffeine (0.2 mg/mL in methanol) was utilized in the solid extraction cartridges following loading, washing, and elution procedures with acetonitrile, methanol, and methanol-acetic acid (90/10, %v/v) as the solvents, respectively. This solid-phase extraction protocol was applied for the extraction of caffeine and some catechin compounds from green tea. A comparison was made between the results obtained with the MIP cartridges and a traditional C18 reversed-phase cartridge. It was thereupon found that the recovery of caffeine by the MIPbased sorbent used in this work was almost two and four times greater than that by a commercially available C18 material. A quantitative analysis was conducted by high performance liquid chromatography (HPLC) using a C18 column (5 μm, 250 × 4.6 mm) with methanol/water (40/60, %v/v) as the mobile phase at a flow rate of 0.5 mL/min.

• Mycobiology
• /
• v.51 no.3
• /
• pp.157-163
• /
• 2023

Cordyceps fumosorosea is an important species in the genus of Cordyceps, containing a variety of bioactive compounds, including fumosorinone (FU). This study was a ground-breaking assessment of FU levels in liquid and solid cultures. The present study focused on the impacts of solid-state fermentation (SSF) using solid substrates (wheat, oat, and rice), as well as the effects of fermentation parameters (pH, temperature, and incubation period), on the generation of FU. All the fermentation parameters had significant effects on the synthesis of FU. In a study of 25 ℃, 5.5 pH, and 21 days of incubation period combinations calculated -to give maximal FU production, it was found that the optimal values were 25 ℃, 5.5 pH, and 21 days, respectively. In a solid substrate medium culture, FU could be produced from SSF. At 30 days, a medium composed of rice yielded the most FU (798.50 mg/L), followed by a medium composed of wheat and oats (640.50 and 450.50 mg/L), respectively. An efficient method for increasing FU production on a large scale could be found in this approach. The results of this study might have multiple applications in different industrial fermentation processes.

• Korean journal of food and cookery science
• /
• v.20 no.6 s.84
• /
• pp.598-606
• /
• 2004

The application of Dongchimi liquid to Naengmyon broth to improve its eating quality was scientifically explored by reviewing the quality of the product properties. Primarily, the optimum fermentation conditions for Dongchimi from which the liquid portion was extracted were pursued and the optimum mixing ratio sought on the basis of the product physicochemical properties. The liquid portions, periodically extracted from Dongchimi at intervals of two or five days, during fermentation at $10^{\circ}C$, were added to Naengmyon broth. The treatments were prepared at three levels namely, basic broth only ('A') and with ratios of Dongchimi liquid to basic broth of 3:7 (v/v, 'B') and 5:5 (vfv, 'C'). As a typical phenomenon of kimchi fermentation, a gradual decrease in the pH with increasing total acidity was observed as the fermentation of the Dongchimi progressed. At $10^{\circ}C$, the optimum ripening was obtained from day 8, and continued until day 15, when the pH was maintained at about 3.8 to 4.0. The total vitamin C and reducing sugar contents increased until the 13th-day of fermentation, but then decreased thereafter. The turbidity and solid content of the Dongchimi liquid increased with progression of the fermentation. With respect to the color values, the lightness (L) decreased, with increases in the redness (a), yellowness (b) and total color difference $({\Delta}E)$ during fermentation. Most of these observed phenomena for the Naengmyon broth substituted with $30\%$ (Treatment 'A') and $50\%$ (Treatment 'B') Dongchimi liquid, with different storage periods, confirmed the previous fermentation patterns of Dongchimi. A decrease in the pH with increasing total acidity, as well as gradual increases in the total vitamin C and reducing sugars (glucose and fructose) up to the 13th-day of fermentation were accompanied by subsequent declining patterns. The turbidity and solid content of the mixed broth also increased with increasing Dongchimi liquid fermentation period. With respect to the color of the mixed broth, the lightness was decreased, while the redness, yellowness and total color difference increased with increasing Dongchimi liquid fermentation period. It was also proven that the addition of slightly over-ripened Dongchimi liquid to the Naengmyon broth was more preferable.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.109-115
• /
• 2005

Hydrocyclone has been widely used for the solid-liquid separation in many industrial sites because of its comparatively preferable applications that can be applied to wide-range particle sizes. If seawater with impurities flows through pumps or heat exchanger, it might cause an decrease in the efficiency of cooling system In this paper, we have suggested some methods of separating impurities from seawater in the cooling system by using a Hydrocyclone. The effects of design factors as solid concentration, cyclone inlet pressure, flow rate and diameter of underflow on the separating performance of the Hydrocyclone were investigated The results from this study are summarized as follows: 1) In proportion to the decrease of solid concentration, the efficiency of solid-liquid separation is improved. 2) According as the cyclone inlet pressure increases the efficiency of separation is improved. Conclusively, this research suggested that the Hydrocyclone will be used as a pre-treatment system of cooling water in machines, and eventually prevent unexpected accidents in engine systems.