• 대한한방소아과학회지
• /
• 제17권1호
• /
• pp.71-86
• /
• 2003

Objectives : The aim of this study was to investigate the classification methods of the external treatments of atopic dermatitis for Children. Methods: We surveyed the oriental medical book concerning the atopic dermatitis for Children. Results : 1. The oriental herbal medications for the atopic dermatitis used with Ryuhwang(硫?), WoongHwang(雄黃), KyoungBun(輕粉), WhangBaek(黃栢), SeokGo(石膏) and so on. 2. The frequently used type of external prescription is solid or liquid. 3. The external preparations were frequently painted or washing with to the lesion of dermatitis. For the wet type of atopic dermatitis, the solid prescription were sprinkled on the lesion or irrigated with the liquid. For the dry type, the mixed prescription of the solid and liquid were painted on the lesion.

• 한국주조공학회지
• /
• 제9권1호
• /
• pp.73-79
• /
• 1989

Microstructural characteristics of Al-3.63wt.%Pb hyper-monotectic alloy rapidly-solidified by melt spinning were examined. Possibility of forming a planar liquid -solid interface during rapid solidification of this alloy was also considered with a morphological stability theory, and a mechanism of forming banded structure observed at the bottom parts of melt-spinned specimens was considered as well. Application of the absolute stability criterion predicts the liquid-solid interface of the primary aluminium phase to be able to maintain a planar interface during the early stage of rapid solidification. Formation of banded structure was supposed to be resulted from the release of latent heat during solidification, which affect the stability of a planar liquid-solid interface.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.73-81
• /
• 1999

Shake mixing has been widely used in cell culture. The mixing performance for shake mixing, however, has not been reported quantitatively. The critical circulating frequency and the power consumption for complete suspension of particles, based on the definition of Zwietering, were measured in a shaking vessel containing a solid-liquid system. The critical suspension frequency was correlated by the equation from Baldi's particle suspension model modified with the physical properties of the particles. Critical suspension frequency was correlated as following ; $$N_{JS}={\frac{0.58\;d{_p}^{0.06}(g{\Delta}{\rho}/{\rho}_L)^{0.004}X^{0.03}}{D^{0.35}d^{0.17}{\upsilon}^{0.04}}}$$ The power consumption at the critical suspension condition in the shaking vessel was less than that in an agitated vessel with impeller.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.1-11
• /
• 1995

In this outline, the stability of solid/liquid dispersion was theoretically investigated the matter from all angles by using the modified DLVO theory. The stability was handled various considerations such as a production and characteristics of electrical double layer, total interaction$(V_T)$ that consisting of attractive force$(V_A)$ and repulsion$(V_R)$. coagulation, the stability ratio(W), critical flocculation concentration (cfc) and zeta potential$(\zeta)$ etc. It was possible for us to examine with the stability ratio(W), critical flocculation concentration (cfc) and zeta potential$(\zeta)$ that may estimation of stability of solid/liquid dispersion experimentally.

• Earthquakes and Structures
• /
• 제9권3호
• /
• pp.577-601
• /
• 2015

The thermomagnetic effect on plane wave propagation at the liquid-solid interface with nonclassical thermoelasticity is investigated. It is assumed that liquid-solid half-space is under initial stress. Numerical computations are performed for the developed amplitude ratios of P, SV and thermal waves under Cattaneo-Lord-Shulman theory, Green-Lindsay theory and classical thermoelasticity. The system of developed equations is solved by the application of the MATLAB software at different angles of incidence for Green and Lindsay model. The effect of initial stress and magnetic field in the lower half-space are discussed and comparison is made in LS, GL and CT models of thermoelasticity. In the absence of magnetic field, the obtained results are in agreement with the same results obtained by the relevant authors. This study would be useful for magneto-thermoelastic acoustic device field.

• 대한기계학회논문집B
• /
• 제33권1호
• /
• pp.28-38
• /
• 2009

Numerical simulation is performed for microdroplet deposition on a pre-patterned micro-structure. The liquid-air interface is tracked by a level-set method, which is improved by incorporating a sharp-interface modeling technique for accurately enforcing the matching conditions at the liquid-gas interface and the no-slip condition at the fluid-solid interface. The method is further extended to treat the contact angle condition at an immersed solid surface. The present computation of a patterning process using microdroplet ejection demonstrates that the multiphase characteristics between the liquid-gas-solid phases can be used to improve the patterning accuracy.

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.7-14
• /
• 2023

In this study, we investigated the freezing delay time on surfaces with different patterns under -30° conditions through visualization experiments. Among various pattern structures, we fabricated the shape and surface of liquid from the spacing using circular filaments and hole structures. Additionally, using a high-speed camera, we visualized the freezing scenes, enabling us to obtain freezing images and measure the freezing time of the liquid. For each structure, the contact angle and solid fraction of the surface varied. We observed that the freezing delay time was longest when the contact angle was largest and the solid fraction was smallest within the experimental results. We analyzed the variation in anti-icing time using the heat exchange equation between the patterned surface and the liquid.

• 한국주조공학회지
• /
• 제18권3호
• /
• pp.234-239
• /
• 1998

Unidirectional solidification of $Al-CuAl_2$ eutectic composites was studied under the condition of forced convection by vibration. It has been shown that thermal gradient for solid is different from that for liquid during solidification under force convection by vibration. With increase of vibration, mobility of liquid increases, but decreases with decreasing vibration. The rate of solidification is very high initially, and decreases suddenly. For further solidification, the rate of solidification decrceases slowly, and shows a L-type behavior. The mechanical vibration during solidification effects efficiently on nucleation, and induces a forced convection in liquid. By the forced convection, great thermal gradient of liquid interface between solid and liquid can be obtained. The amount of solute near the interface also decreases as solute distribution is improved by the forced convection.

• 한국레이저가공학회지
• /
• 제12권4호
• /
• pp.17-25
• /
• 2009

The surface cleaning method based on the laser-induced breakdown (LIB) of gas and subsequent plasma and shock wave generation can remove small particles from solid surfaces. In the laser shock cleaning (LSC) process, a high-power laser pulse induces optical breakdown of the ambient gas above the solid surface covered with contaminant particles. The subsequently created shock wave followed by a high-speed flow stream detaches the particles. In this work, a novel surface cleaning process using laser-induced breakdown of liquid is introduced and demonstrated. LIB of a micro liquid jet increases the shock wave intensity and thus removes smaller particle than the conventional LSC method. Experiments demonstrate that the cleaning force and cleaning efficiency are also increased significantly by this method.

• 한국균학회지
• /
• 제49권4호
• /
• pp.525-530
• /
• 2021

The cultivation in sawdust media, mushroom productivity, and fruiting body characteristics of Lentinula edodes strains NIFoS 2778 and NIFoS 3363 were compared according to the inoculation conditions. The cultivation period was 5% shorter when liquid spawn was used. Fruiting bodies were induced after 113 days of incubation on media inoculated with liquid spawn, and the cultivation period was 119 days on media inoculated with solid spawn. Mushroom productivity of NIFoS 2778 was the highest (661.4 g) when 36 mL of liquid spawn was used. For NIFoS 3363, mushroom production was higher under liquid inoculation conditions when the same amount of liquid and solid spawns were used. The mushroom characteristics of the two strains were not significantly different, except for gill width and stipe diameter.