• Food Science and Preservation
• /
• v.24 no.6
• /
• pp.865-870
• /
• 2017

Yogurt is produced by fermentation of milk using bacteria known as "yogurt cultures". Most of these bacteria are probiotics such as Lactobacillus delbrueckii subsp. bulgaricus, Lb. rhamnosus, Streptococcus thermophilus, and Bifidobacterium. The domestic fermented milk market is increasing, and about 30 companies are producing yogurt. The purpose of this study was to analyze the quality characteristics of domestic commercial liquid yogurt. Total 30types of commercial yogurts were sampled and their physicochemicial properties, including pH, sugar content, acidity, viscosity, and microbial characteristics of lactic acid bacteria counts, were measured. Commercial liquid type yogurt showed a pH of 4.5, sugar content of 7.4-21.2%, total acid content of 0.4-0.9%, and viscosity of 0.1-250 cP. In terms of microbial populations, lactic acid bacteria counts were 7.2-11.3 log CFU/mL and anaerobic lactic acid bacteria counts were 8.0-11.5 log CFU/mL. The quality characteristics differed depending on the constituents of the sample and the microorganisms used. These results are related to the quality characteristics of yogurts and are useful for identifying new trends in the domestic fermented milk industry.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.1
• /
• pp.9-18
• /
• 2010

There are two kinds of models in two-phase pressured drop; homogeneous flow model and separated flow model. Many previous researchers have developed correlations for two-phase pressure drop in a microchannel. Most correlations were modified Lockhart and Martinelli's correlation, which was based on the separated flow model. In this study, experiments for adiabatic liquid water and nitrogen gas flow in rectangular microchannels were conducted to investigate two-phase pressure drop in the rectangular microchannels. Two-phase frictional pressure drop in the rectangular microchannels is highly related with flow regime. Homogeneous model with six two-phase viscosity models: $Owen^{(21)}$'s, $MacAdams^{(22)}$'s, Cicchitti et ${al.}^{(23)}$'s, Dukler et ${al.}^{(24)}$'s, Beattie and ${Whalley}^{(25)}$'s, Lin et ${al.}^{(26)}$'s models and six separated flow models: Lockhart and $Martinelli^{(27)}$'s, ${Chisholm}^{(31)}$'s, Zhang et ${al.,}^{(15)}$'s, Lee and ${Lee}^{(5)}$'s, Moriyama and ${Inue}^{(4)}$'s, Qu and $Mudawar^{(8)}$'s models were assessed with our experimental data. The best two-phase viscosity model is Beattie and Whalley's model. The best separated flow model is Qu and Mudawar's correlation. Flow regime dependency in both homogeneous and separated flow models was observed. Therefore, new flow pattern based correlations for both homogeneous and separated flow models were individually proposed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.2
• /
• pp.112-117
• /
• 2007

This study aims to develop an alternative energy like oil made from marine organic waste by marine products waste, spent fishing nets. There are already many commercial examples and case studies based on the petroleum industry-refuse plastic or refuse tire, however, it is rare that a research developing alternative energy from food waste and organic waste. Therefore, this study investigated the oil made from thermal decomposition under the high temperature and high pressure condition, and examined the possibility for commercial use by testing its own characteristics. A bio-oil from thermal decomposition at $250^{\circ}C$ and 40 atm was hard to remove impurities because of its high viscosity, showed lower caloric value than heavy oil, and generated various gases which were not appropriate for the use of fuel. It is noticeable that thermal decomposition was occurred at $250{\pm}5^{\circ}C$ using steam pressure, which much lower compared to the existing method of thermal decomposition, more than $500^{\circ}C$. Since the high viscosity of bio-oil, it is necessary a further study to use as liquid fuel.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.85-89
• /
• 2006

The effect of vapor grown carbon fiber (VGCF) contents on electrical and rheological properties of VGCF filled polyphenylene sulfide (PPS) composites prepared through melt mixing using a twin screw exruder was studied. This method was proved to be quite effective to produce good dispersion of VGCF in the matrix even for highly filled PPS. From the dependence of the electrical conductivity on VGCF content, the percolation phenomena began to occur above $10\;wt\%$. While there is only a marginal increase of viscosity for 1 and $5\;wt\%$ VGCF filled PPS, the composites containing $10\;wt\%$. While VGCF showed abrupt increase in viscosity as well as flattening of frequency vs modulus curve, indicating a transition from a liquid-like to a solid-like behavior due to the creation of VGCF network. This result agrees well to the fact that the network formation in the composite can be composite by rheological property dependence on filler content as well as by electrical conductivity measurement.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.123-128
• /
• 1991

Addition of two different salt mixtures of sodium phosphates, Ca-EDTA, $NaNO_2$ and sodium citrate were investigated for their effects on relative viscosity, textrue, sensory properties of kimchi and solids contents of kimchi and kimchi liquid during fermentation at $4{\sim}3.5^{\circ}C$. The salt mixtures were added into half fermented kimchi with the concentration range of $0.001{\sim}0.01\;M$. The results showed that higher values in viscosity of kimchi liquids were obtained for those fermented at low temperature and with salts mixtures added. The hardness of Chinese cabbage was gernerally increased until pH 4.0 reached and then decreased thereafter for those fermented without salts mixture. However the salts added kimchi showed no decrease and a slightly harder texture measured at the late stage of fermentation. Soluble solids concentration steadly decreased in kimchi liquids for those salts mixture added while those without salts mixture were initially increased followed by slow decrease. Comparison of sensory properties showed that the degree of changes was reduced when salt mixture was added. Higher scores in fresh-sourness and acidic taste, hardness and chewiness in texture and lower moldy odor were obtained when the data was compared for those kimchi having the pH range of $4.0{\sim}4.2$.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.91-95
• /
• 2009

To examine physico-chemical properties of the polysaccharide extracted from liquid-cultured mycelia of Schizophyllum commune, each the polysaccharide was extracted with hot water treatment and then fractionated with ethanol, alkaline solution and ultrafiltration. And we determined carbohydrate contents, composition of amino acids, infra-red spectrum and viscosity. Carbohydrate contents of polysaccharide treated with ethanol and ultrafiltration were 72.0% and 62.3%, and proteins content were 15.3% and 32.0% respectively. The carbohydrate consisted of four monosaccharides and the protein contained 16 amino acids. The polysaccharide obtained from ultrafiltration was shown an absorption band characteristic of the ${\beta}$-glycosidic linkage by infra red spectra. These results suggest that the polysaccharide extracted from Schizophyllum commune showed the characteristics of proteinbounded polysaccharide, and it was ${\beta}$-glycosidic linkage with strong viscosity.

• Journal of Adhesion and Interface
• /
• v.2 no.3
• /
• pp.25-32
• /
• 2001

Ethyl cyanoacrylate (ECA) is used as an instant adhesive, and it can be readily polymerized by moisture in air without any initiator and applied for industrial products and ohome use. However, pure ECA monomer is low-viscosity liquid at room temperature that flows into substrate surface. To thicken the instant adhesive, poly(methyl methacylate)(PMMA) is often added in it commercially. Another disadvantage of instant adhesive polymer is its brittleness In this study, functional polymers including PMMA for an additive of ECA were prepared to increase viscosity of the monomer and flexibility of the adhesive atthe same time The additives, P(MMA-VAc-EVE), were synthesized by radical copolymerization of MMA with VAc and EVE having low glass transition temperature (Tg). The additives were added to ECA to get functional instant adhesives. The chemical structures of the additives and ECA polymers were confirmed by $^1H$ NMR and FTIR, and their physical and mechanical properites were also evaluated. The Tg of the obtained additives decreased with increasing the content of VAc or VAc-EVE, indicating more improved flexibility. In addition, functional instant adhesive containing the additives showed higher bonding strength than that of the existing one.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.62-68
• /
• 2016

Purpose In a cyclosporine experiment using a robotic liquid handing system has found a deviation of its standard curve and low reproducibility of patients's results. The difference of the test is that methanol is mixed with samples and the extractions are used for the test. Therefore, we assumed that the abnormal test results came from using methanol and conducted this test. In a manual of a robotic liquid handling system mentions that we can choose several setting parameters depending on the viscosity of the liquids being used, the size of the sampling tips and the motor speeds that you elect to use but there's no exact order. This study was undertaken to confirm pipetting ability depending on types of liquids and investigate proper setting parameters for the optimum dispensing ability. Materials and Methods 4types of liquids(water, serum, methanol, PEG 6000(25%)) and $TSH^{125}I$ tracer(515 kBq) are used to confirm pipetting ability. 29 specimens for Cyclosporine test are used to compare results. Prepare 8 plastic tubes for each of the liquids and with multi pipette $400{\mu}l$ of each liquid is dispensed to 8 tubes and $100{\mu}l$ of $TSH^{125}I$ tracer are dispensed to all of the tubes. From the prepared samples, $100{\mu}l$ of liquids are dispensed using a robotic liquid handing system, counted and calculated its CV(%) depending on types of liquids. And then by adjusting several setting parameters(air gap, dispense time, delay time) the change of the CV(%)are calcutated and finds optimum setting parameters. 29 specimens are tested with 3 methods. The first(A) is manual method and the second(B) is used robotic liquid handling system with existing parameters. The third(C) is used robotic liquid handling system with adjusted parameters. Pipetting ability depending on types of liquids is assessed with CV(%). On the basis of (A), patients's test results are compared (A)and(B), (A)and(C) and they are assessed with %RE(%Relative error) and %Diff(%Difference). Results The CV(%) of the CPM depending on liquid types were water 0.88, serum 0.95, methanol 10.22 and PEG 0.68. As expected dispensing of methanol using a liquid handling system was the problem and others were good. The methanol's dispensing were conducted by adjusting several setting parameters. When transport air gap 0 was adjusted to 2 and 5, CV(%) were 20.16, 12.54 and when system air gap 0 was adjusted to 2 and 5, CV(%) were 8.94, 1.36. When adjusted to system air gap 2, transport air gap 2 was 12.96 and adjusted to system air gap 5, Transport air gap 5 was 1.33. When dispense speed was adjusted 300 to 100, CV(%) was 13.32 and when dispense delay was adjusted 200 to 100 was 13.55. When compared (B) to (A), the result increased 99.44% and %RE was 93.59%. When compared (C-system air gap was adjusted 0 to 5) to (A), the result increased 6.75% and %RE was 5.10%. Conclusion Adjusting speed and delay time of aspiration and dispense was meaningless but changing system air gap was effective. By adjusting several parameters proper value was found and it affected the practical result of the experiment. To optimize the system active efforts are needed through the test and in case of dispensing new types of liquids proper test is required to check the liquid is suitable for using the equipment.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.2
• /
• pp.107-116
• /
• 2017

When drilling operation is being performed, many physical and chemical changes are occurred near wellbore. To handle various changes of well condition and keep drilling process safe, additives of bulk, such as bentonite for increasing density of drilling mud, barite for increasing viscosity of drilling mud, polymer for chemical control, or surfactant, are added into drilling mud through a mud shear mixer. Because the achievement of the required material property through mud mixing system is essential to stabilize drilling system, it is of importance to analyze multi-phase flow during mud mixing process, which is directly related to increase mixing performance of the system and guarantee the safety of the whole drilling system. In this study, a series of liquid-solid flow simulation based on a computational fluid dynamics (CFD) are performed with comparing to solid concentration in experiment by Gilles et al. [2004] to understand the characteristics of liquid-solid mixing in a mud shear mixer. And then, the simulation-based design of shear mixer are carried out to improve mixing performance in a mud handling system.

• Korean Journal of Food Science and Technology
• /
• v.25 no.1
• /
• pp.63-68
• /
• 1993

Heat penetration characteristics of retort pouched curry were studied to determine optimal sterilization conditions. Heating curve of retort pouched curry showed a simple logarithmic curve. The $f_h$ value (min.) of solid part in retort pouched curry was 1 min. higher than that of liquid part. $f_h$ value (min.) and $j_h$ value (heating lag factor) ranged from 8.3 min. to 12 min. and 1.0 to 1.17 respectively with increasing the ratio of solid to liquid and viscosity. $f_h$ value (min.) and $j_h$ value were significantly increased from 7.4 min. to 12.6 min. and 1.0 to 1.14 respectively with increasing thickness of the pouch from 11 to 15 mm. The low and medium volatile aroma components of retort pouched curry decreased during sterilization, which increased the high volatile aroma components. The retort pouched curry processed at $120^{\circ}C$, for 24 min. with $F_o$, value of $8{\sim}9$ could keep up a desirable quality without any remarkable deterioration.