• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.62-65
• /
• 2011

액체로켓엔진용 극저온 산화제 고압 배관 기술 개발을 위해 시제품을 제작하였다. 기술 개발 시제품은 체결용 플랜지, 직관, 곡관, 벨로우즈, 분기구로 구성하였다. 액체로켓엔진용 극저온 산화제 고압 배관은 터보펌프에서 토출된 고압의 극저온 산화제를 연소기로 공급하는 경로이므로 극저온, 고압의 작동환경에서 구조적 안정성을 가져야 한다. 따라서 본 제작공정 개발에서는 극저온을 고려한 구조해석을 수행하여 적합한 소재를 선정하였으며, 공정개발과 특수공정을 적용하여 시제품을 제작한 후 구조강도 시험을 수행하였다. 본 개발을 통해 액체로켓엔진에 적용되는 극저온 산화재 고압배관을 위한 기술적 기반과 소재 응용기술, 향후 고성능 대형 액체로켓엔진에 적용하기 위한 공정개발을 완료하였다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.48-49
• /
• 2001

Cryogenic technology is one of the key technologies for fusion reactor equipped with superconducting coil for plasma confinement. The KSTAR(Korea Superconducting Tokamak Advanced Research)Project is in progress since 1996. Major parameters of the KSTAR tokamak are : major radius 1.8m, minor radius 0.5m, toroidal field 3.5 Tesla and plasma current 2MA with a strongly shaped plasma cross-section and double -null diverter. Considering practical engineering constraints, the KSTAR device is designed for a pulse length of 300 sec in up-graded operation mode but in the initial configuration would provide a pulse length of 20 sec provided by the poloidal coil system in base-line operation mode. The cryogenic system is composed as follows : cold box, helium compressor system, distribution box, helium gas buffer tank, helium gas purifying system, gas recovery system, liquid helium storage dewar, current lead box, current bus line and liquid nitrogen storage tank.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.548-550
• /
• 2010

The droplet motion on a flat substrate with contact angle hysteresis is studied by solving the equations governing the conservation of mass and momentum. The liquid- gas interface is determined by an level-set method which is based on a sharp-interface representation for accurately imposing the matching or coupling conditions at the interface. The method is modified to treat the dynamic contact angle at the liquid-gas-solid interface. The computations are performed to investigate a droplet impact and merging pattern on a flat substrate to find a optimal condition in a micro-line patterning process. The effects of dynamic contact angles on droplet motion are quantified.

• 자원리싸이클링
• /
• 제8권3호
• /
• pp.31-36
• /
• 1999

아크릴로니트릴 제조공정 중 부산물로 생성되는 물과 아세토니트릴 공비혼합물을 분비, 회수하기 위하여 혼합용매로서 toluene-ethylacetate를 선택하여 $25^{\circ}C$에서 4성분계 toluene(1)-water(2)-acetonitrile(3)-ethylacetate(4)에 대한 액-액평형 데이터를 구하였다. Tie-line 계산치를 예측하기 위하여 실험치를 UNIFA 모델식의 파라미터와 상호연관시켜 비교하였다. 또한 용매의 성능을 비교하기 위하여 분배계수 및 선택도를 고찰하였다.

• 설비공학논문집
• /
• 제11권3호
• /
• pp.384-390
• /
• 1999

A vibrating U-Tube decimeter has been evaluated as a sensor for measuring the concentration of oil in the liquid line of a refrigeration system. Calibration and performance tests were conducted under simulated liquid-line conditions for R-407C/POE oil and R-410A/POE oil mixtures in oil concentration from 0 to 15 weight percent. Test temperatures ranged from 20 to 5$0^{\circ}C$. As a result of test, oil concentration correlations are presented in terms of specific gravity at each constant temperature. These equations enable to predict the oil concentration without any extraction of the mixture, and can be applied for R-407C/POE oil and R-410A/POE oil mixtures.

• 설비공학논문집
• /
• 제9권4호
• /
• pp.536-544
• /
• 1997

This study presents test results of a residential window system air-conditioner using R22 and two potential alternative refrigerants, R407C and R410B. A series of performance tests was performed for the basic and liquid-suction heat exchange cycle in a psychrometric calorimeter test facility. For R407C, the same rotary compressor was used as in the R22 system. However, compressor for the R410B system was modified to provide the similar cooling capacity. The evaporator circuit was changed to get a counter-cross flow heat exchanger to take advantage of zeotropic mixture's temperature glide, and liquid-line suction-line heat exchange cycle was also considered to improve the performance of the system. Test results were compared to those for the basic R22 system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.481-483
• /
• 2015

LCD의 특성을 이해하기 위해 Vertical Alignment Liquid Crystal Cell을 만들어보고, 전류를 흘려 Cell에 나타나는 pattern을 확인한다. 다양한 rubbing 방향을 주어 완성된 Cell에 나타나는 여러 가지 pattern들을 확인, 비교해보고 그 pattern의 발생 원인에 대해 연구한다. Cell에 전류를 가해주면 line이 나타나는데 가해준 전압과 주파수가 높을수록 line이 많이 나타나는 것을 확인할 수 있었다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 춘계 총회 및 학술발표회
• /
• pp.19-20
• /
• 1997

균일한 용액이 비용매의 첨가로 인해서 열역학적으로 불안정해지면 용액은 다른 조성을 가진 2개의 액상으로 분리되어서 $\Delta Gm$을 낮추게 된다. Liquid-liquid phase separation에는 nucleation and growth와 spinodal decomposition의 2가지 경로가 있다. 본 실험에서 사용된 고분자는 폴리술폰 (Udel P-3500)이며, 용매로는 NMP와 THF를 사용하였다. Flory-huggins 이론으로부터 유도된 식들과 computer simulation을 통해서 여러 조건에 따른 binodal line, spinodal line, critical 조성 등을 구하고 이를 실험치와 비교해서 interaction parameter들을 추정하였다. 10,15,20,25,30 wt%의 Polysulfone 용액을 제조한 후 유리판 위에 casting 하고, 조성이 각기 다른 침전조에 침전시켜 막을 얻고 상온에서 건조시킨 후 일부를 액체 질소에 급랭시켜 파단면과 표면을 SEM을 이용하여 관찰하였고 일부는 Instron을 이용하여 기계적 물성을 관찰하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.557-560
• /
• 2006

The contact angle of a meniscus and a droplet can be controlled by using electrowetting phenomena. We investigated the dynamic aspect of electrowetting for an oil-electrolyte interface formed inside a closed glass tube. A step input voltage is applied and the subsequent motion of the interface is recorded by a high-speed camera. A kind of capillary instability is observed near the three-phase contact line, which could degrade the reliability of device utilizing electrowetting such as electrowetting liquid lens. The dynamics of interface motion for different input voltages and the fluid viscosities are analyzed and discussed based on the experimental results.

• 한국분무공학회지
• /
• 제23권4호
• /
• pp.159-168
• /
• 2018

Thrust throttling in a liquid rocket engine can be implemented via several ways such as high pressure drop injector, dual manifold, multiple chamber, pintle injector, and gas injection. Thrust throttling using gas injection controls thrust by usually injecting inert gas into propellant through an aerator to reduce the propellant's bulk density. In this study, the outside-in aerator was used in the propellant line to create two phase flow. Closed-type, open-type, and screw-type bi-swirl coaxial injectors were utilized for investigating throttling characteristics such as pressure drop, mixture density, and discharge coefficient according to gas-liquid mass ratio.