• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.18
• /
• pp.7611-7615
• /
• 2014

Aims: To prepare 5-fluorouracil (5-Fu) nanoparticles with higher encapsulation efficiency and drug loading, and then investigate interaction with the SGC-7901 gastric cancer cell line. Materials and Methods: Prescription was optimized by orthogonal experiments, the encapsulation efficiency and loading capacity were tested by high-performance liquid chromatography, and inhibition of proliferation by 5-Fu nanoparticles and 5-Fu given to cells for 24, 48 and 72 hours was investigated by methyl thiazolyl tetrazolium assay (MTT). In addition, 5-Fu nanoparticles were labeled by fluorescein isothiocyanate (FITC), and absorption into cells was tested by flow cytometry. Results: The optimal conditions for preparation were concentrations of 5-Fu of 5mg/ml, of $CaCl_2$ of 60 mg/ml and of chitosan of 2 mg/ml. With a stirring speed of 1200rpm, encapsulation efficiency of 5-Fu nanoparticles was $55.4{\pm}1.10%$ and loading capacity was $4.22{\pm}0.14%$; gastric cancer cells were significantly inhibited by 5-Fu nanoparticles in a time and concentration dependent manner, and compared to 5-Fu with slower drug release, in a certain concentration range, inhibition with 5-Fu nanoparticles was stronger. 5-Fu nanoparticles were absorbed by the cells in line with the concentration. Conclusions: 5-Fu nanoparticles can inhibit growth of gastric cancer cells in vitro to a greater extent than with 5-Fu with good adsorption characteristics, supporting feasibility as a carrier.

• Geomechanics and Engineering
• /
• v.16 no.2
• /
• pp.125-140
• /
• 2018

Tianjin, which is located on the west shore of the Bohai Sea, is part of China's Circum-Bohai-Sea Region, where very weak clay is deposited. From the 1970s to the early $21^{st}$ century, Tianjin marine clay deposits have been the subject of numerous geotechnical investigations. Because of these deposits' geological complexity, great depositional thickness, high water content, large void ratio, excessive settlement, and low shear strength, the geotechnical properties of Tianjin marine clay need to be summarized and evaluated based on various in situ and laboratory tests so that Tianjin can safely and economically sustain more infrastructure in the coming decades. In this study, the properties of Tianjin marine clay, especially its consolidation properties, are summarized, evaluated and discussed. The focus is on establishing correlations between the geotechnical property indexes and mechanical parameters of Tianjin marine clay. These correlations include the correlations between the water content and the void ratio, the depth and the undrained shear strength, the liquid limit and the compression index, the tip resistance and the constrained modulus, the plasticity index and the ratio of undrained shear strength and the preconsolidation pressure. In addition, the primary consolidation properties of Tianjin marine clay, such as the intrinsic compression line (ICL), sedimentation compression line (SCL), compression index, $C_c$, coefficient of consolidation, $C_v$, and hydraulic conductivity change index, $C_{kv}$, are evaluated and discussed. A secondary consolidation property, i.e., the secondary compression index, $C_a$, is also investigated, and the results show that the ratio of $C_a/C_c$ for Tianjin marine clay can be used to calculate $C_a$ in secondary consolidation settlement predictions.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.2
• /
• pp.617-622
• /
• 2014

Voacanga globosa (Blanco), a plant endemic to the Philippines, is traditionally used especially by indigenous people of Bataan in the treatment of ulcers, wounds and tumorous growths. This study aimed to provide scientific evidence to therapeutic properties by determining cytotoxic and pro-apoptotic activity of HPLC fractions from leaves on HCT116 human colon carcinoma and A549 human lung carcinoma cell lines. Ethanolic extraction was performed on V globosa leaves followed by hexane and ethyl acetate partitioning. Silica gel column chromatography and high performance liquid chromatography (HPLC) produced MP1, MP2 and MP3 fractions. Cytotoxic activity of the fractions was determined through MTT assay against the cancer cell lines HCT116 and A549 and the non-cancer AA8 Chinese hamster ovarian cell line. Pro-apoptotic activities of the most active fractions were further assessed through DAPI staining, TUNEL assay and JC-1 mitochondrial membrane potential assay with HCT116 cells. While the MPI fraction exerted no significant activity against all cell lines tested, MP2 and MP3 fractions demonstrated high toxicity against HCT116 and A549 cells. The MP3 fraction induced formation of apoptotic bodies, condensed DNA and other morphological changes consistent with apoptosis of HCT116 cells and TUNEL assay showed significant increase in DNA fragmentation over time. In these cells, the MP3 fraction also induced mitochondrial membrane destabilization, which is generally associated with the beginning of apoptosis. Phytochemical analysis demonstrated the presence only of saponins and terpenoids in the MP3 fraction. The results indicate that the MP3 fraction exerts cytotoxic activity on HCT116 cells via induction of apoptosis triggered by loss of mitochondrial membrane potential crucial for cell survival.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.3
• /
• pp.207-214
• /
• 2002

One of the way to derive design parameters of the fuel feeding system in satellite propulsion system is to analyze unsteady flow of liquid propellant (hydrazine). During steady thruster firing the flow rate is constant: if a thruster valve is abruptly shut down among a set of thrusters, pressure spikes much higher than the initial tank pressure occur. This renders the fuel flow unsteady, and the fluid pressure and flow rate to oscillate. If the pressure spikes are high enough, there are possibilities that propellant explosively decomposes, thruster valves we damaged, and adiabatic detonation of the hydrazine propellant is potentially incurred. Reflected shockwaves could also affect the calibration and operation of the pressure transducers. These necessitate the analysis of unsteady flow in the propulsion system design, and pressure behavior inside the propellant line obtained through some governing parameter variation is presented in this work.

• Journal of Plant Biotechnology
• /
• v.37 no.2
• /
• pp.196-204
• /
• 2010

With the completion of genome sequencing of several organisms, attention has been focused to determine the function and functional network of proteins by proteome analysis. The recent techniques of proteomics have been advanced quickly so that the high-throughput and systematic analyses of cellular proteins are enabled in combination with bioinformatics tools. Furthermore, the development of proteomic techniques helps to elucidate the functions of proteins under stress or diseased condition, resulting in the discovery of biomarkers responsible for the biological stimuli. Ultimate goal of proteomics orients toward the entire proteome of life, subcellular localization, biochemical activities, and their regulation. Comprehensive analysis strategies of proteomics can be classified as three categories: (i) protein separation by 2-dimensional gel electrophoresis (2-DE) or liquid chromatography (LC), (ii) protein identification by either Edman sequencing or mass spectrometry (MS), and (iii) quanitation of proteome. Currently MS-based proteomics turns shiftly from qualitative proteome analysis by 2-DE or 2D-LC coupled with off-line matrix assisted laser desorption ionization (MALDI) and on-line electrospray ionization (ESI) MS, respectively, to quantitative proteome analysis. Some new techniques which include top-down mass spectrometry and tandem affinity purification have emerged. The in vitro quantitative proteomic techniques include differential gel electrophoresis with fluorescence dyes, protein-labeling tagging with isotope-coded affinity tag, and peptide-labeling tagging with isobaric tags for relative and absolute quantitation. In addition, stable isotope labeled amino acid can be in vivo labeled into live culture cells through metabolic incorporation. MS-based proteomics extends to detect the phosphopeptide mapping of biologically crucial protein known as one of post-translational modification. These complementary proteomic techniques contribute to not only the understanding of basic biological function but also the application to the applied sciences for industry.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.1040-1044
• /
• 1995

Magnetic garnet films of (YSmLuCa)$_3$(FeGe)$\_$5/O$\_$12/ have been grown by the liquid phase eqitaxy method on the substrate of non-magnetic garnet Gd$_3$Ga$\_$5/O$\_$12/. The variation of Sm ion concentration were varied 0.3, 0.4, 0.6, mole/formula unit respectively. The magnetic properties of the samples for the bubble magnetic materials, such as, line width ΔH of ferromagnetic resonance (FMR), magnetic saturation induction 4$\pi$Ms, wall mobility u$\_$w/ uniaxial magnetic anisotropy energy Ku, were measured and discussed the relations between these properties. The line width ΔH decreases with increasing 4$\pi$Ms, and with decreasing Sm concentration. The anisotropy energy Ku increases not only with increasing Sm ion concentration, but also increasing 4$\pi$Ms. The value of wall mobility u$\_$w/ increase with increasing 4$\pi$Ms and decreases with increasing Sm concentration. We define a physical constant Eι from the fact that the product of 4$\pi$Ms and ΔH is constant with dimension of energy density. The Eι is dependent only on Sm concentration.density. The Eι is dependent only on Sm concentration.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.225-231
• /
• 2002

POSCO $\#2$ Stainless steel making plant produces more than 600 thousand ton per year with a variety of products consisting of austenite and ferrite stainless steel to meet custrmers' needs since 1996. The plant has four different major processes, that are, EAF-AOD-VOD-CC to finally produce semi-product called as slab. In this study, we importantly took AOD process into consideration due to its roles such as to check and verify the final qualities through sampling inspection. But the lead-time from sampling to its verification takes five to ten minutes causing produrtivity loss as muck as the lead-time as a result. Of all indices for quality and process control the plant has, carbon ingredient in liquid type of steel is the most important since it affects in a great way to the characteristics of steel, if any problem. customers not satisfied with quality could issue a claim; therefore there is no way hut to guarantee it before delivery. in this study, to reasonably reduce lead-time ran save a cycle time and finally improve our productivity from a state-or-art alternative just such as applying statistical model based on multi-regression analysis into the A.O.D line by analyzing the statistical and technical relationship between carbon and the relevant some vital independent variables. In consequence, the model with R-square $87\%$ allowed the plant to predict, abbreviating the process in relations to sampling to verification. approximately the value of [C] so that operators could run the process line with reliability on data automatically calculated instead of actual inspection. In the future, we are going to do the best to share this type of methodology with other processes, if possible, to apply into them.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.105-113
• /
• 1998

Accurate radiation dosimetric characters is very important to determine of dose to a radiotherapeutic patient. Medical linear accelerators have been developed not only its new quality of convenient operation but also electric moderation. It is reliable to measure more detail physical parameter that linac's internal ability. Typically, radiation dosimetric tool is classified ionization chamber, film, thermoluminescence dosimeter, etc. Nowaday, Electronic Portal Imaging Device is smeared in radiation field to verification of treatment region. EPID's image was focused that using both on-line image verification and absolutely minimum absorbed dose during radiotherapy. So, Electronic Portal Imaging was tested for quality evaluation of medical linear accelerator had its pure conditional flash. This study has performed symmetry, Light/Radiation field congruence, and energy check, geometry difference on wedge filter using a liquid filled ion chamber (EPID). Prior to irradiated on EPID, high energy photon beam is checked with ion chamber. Using these results more convenient dosimetric method is accomplished by EPID that taken digital image. Medical image is acquired with EPID too. Therefore, EPID can be analyzed by numerical information for what want to see or get more knowledge for natural human condition.

• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.672-681
• /
• 2009

The aim of this study was to evaluate the antioxidant activities of enzymatic digests from citrus by-products (CBPs) prepared by high speed drying (HSD). HSD needs a short time (60 min) for drying and can be used in a commercial scale. Enzymatic digests were prepared from the CBPs using 6 enzymes such as aminoglucosidase (AMG), celluclast, pectinex, termamyl, ultraflo, and viscozyme. Antioxidant activities of AMG digest from CBPs were evaluated by different in vitro models such as 1,1-diphenyl-2-picrylhydrazyl (DPPH), hydroxyl, alkyl, $H_2O_2$ scavenging, metal chelating, lipid peroxidation, and comet assays, and exhibited strong activities. The antioxidant compounds were detected by an high performance liquid chromatography (HPLC) coupled on-line to an 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid ($ABTS^+$) scavenging detection system, and found that hesperidin was the key compound. Therefore, the results obtained in this study suggest that HSD is an effective method to transform wet CBPs into dried form, and CBPs are potential source of natural antioxidant.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.102-105
• /
• 2002

ADSS(All Dielectirc Self-Supporting) cable installed under high voltage power cable line suffers a variety of environmental influence, rain, wind, snow fall, chemical pollution, salt fog and electrical stress. Its lifetime is required to be at least 20 years with this harsh weathering condition. The electrical stress under high voltage power line gives rise to dry band arcing and tracking, the severest damage, on the outer sheath of cable. Finally tracking might penetrate sheath and cause the break-down of ADSS cable. Tracking resistant sheath material, therefore, should be used to protect the core of ADSS from dry band arcing and to be sure long lifetime. In this work, we discuss various commercial tracking resistant material to investigate the way of track resistance and compare their mechanical, electrical, weathering and tracking properties through serial experiments. We found track resistant material is categorized into two main type : polyethylene with metal hydroxide and polyethylene with reduced carbon black. The Liquid contaminant, Inclined plane Tracking and Erosion test says the time to track of tracking resistant material with metal hydroxide has a little longer time to track in the high applied voltage than that with carbon black, but mechanical and weathering properties were inferior to.