• 한국패류학회지
• /
• 제26권4호
• /
• pp.255-260
• /
• 2010

피조개, Scapharca broughtonii (Schrenck) 정자의 동결보존 위해 동결높이에 따른 예비동결 (0, 2, 4, 6 cm), 희석제 (150 mM NaCl, 300 mM glucose, Ringer's solution)와 동해방지제(glycerol, dimethylsulfoxide (DMSO), dimethylacetamide (DMA), methaol) 에 따른 효과를 정자의 운동성과 생존율로 비교하였다. 피조개 정자 동결보존에 있어 예비동결은 액체질소표면으로부터 2 cm가 가장 효과적이었으며, 희석제로는 Ringer's solution이 동해방지제로는 DMSO 10% 농도가 가장 적합하였다.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.1-8
• /
• 2001

All objects emit thermal radiation and this radiation is the basis of the techniques used to detect flames. The usual phenomena occurring in the initial stage of the fire are generally invisible products of a combustion and visible smoke. Liquid or gaseous materials do not undergo a smoldering stage so that fires develop very rapidly. Also, the heat generated by the initial flames is usually not sufficient to activate a heat detector. In this case the most effective criterion for automatic fire detection is the flame. According to the fire regulation of korea, the compulsory standard provided that a flame detector shall be installed in a place that the attachment height of detector is higher than 20 m, chemical plants, hangar, refinery, etc.. The results of the research and development are discriminated between a flame and other radiant emitters, developed a UV detector tube contains an inert gas which absorbs UV radiation, developed PZT pyroelectric element is based on the use of photovoltanic cell, developed IR band-pass filter that only allow a 4.3 $\mu\textrm{m}$ radiation wavelength to reach the sensors and developed UV-IR combination flame detector combined into a single detection device.

• 한국환경과학회지
• /
• 제29권4호
• /
• pp.423-434
• /
• 2020

The effects of amino acid and/or urea liquid fertilizer application on the growth and phytochemicals of Perilla leaves were summarized as follows; The fresh weight of the perilla leaves was in the order of CF, CL, KLF, and control, and 39.7 g, 37.4 g, 36.5 g and 32.3 g were measured. The plant height increased by 71.6 cm in the CF treatment than in the control(54.6 cm). The number of nodes was 14.3 node in CF treatment and 19% more than control(12 node). The vitamin C content tends to be increased by fertilizing the amino acid solution in the perilla leaf. The components of polyvalent unsaturation of n-6 origin were measured in CF treatment, KLF treatment, and control in 10.19 mg, 10.18 mg, and 9.38 mg per 100 g, respectively. Glutamic acid, aspartic acid, leucine, arginine, alanine and lysin were contained in perilla leaf amino acid. Glutaminic acid content was found to be 455.1 mg, 495.6 mg, and 478.8 mg in the control, KLF and CF treatment per 100 g, respectively. Effective nutrition management using amino acid fertilizer optimizes crop yield and profitability, it is important to reduce the negative environmental risks of using fertilizer.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.54-60
• /
• 2002

To obtain the breakthrough characteristics for the design of fixed bed adsorption plant, adsorption experiment on granular activated carbon was performed with tharonil in the fixed bed. The pore diffusivity and surface diffusivity of tharonil estimated by the concentration-time curve and adsorption isotherm were $D_s=2.825{\times}10^{-9}cm^2/s,\;D_p=1.26{\times}10^{-5}cm^2/s$, respectively. From comparison of the pore diffusivity and surface diffusivity, it was found that surface diffusion was controlling step for intrapaticle diffusion. The breakthrough curve predicted by constant pattern-linear driving force model were shown to agree with the experimental results. The surface diffusivity and film mass transfer coefficient had no effect on the theoretical breakthrough curve but the adsorption isotherm had fairly influence on it. Appearance time of breakthrough curve is faster with the increase flow rate and inflow concentration of liquid. The utility of granular activated carbon is enhanced with the increase of bed height and with the decrease of inflow rate.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.134-140
• /
• 2016

The Control Rod Assembly (CRA) controls the reactor power by adjusting its position in the reactor core during normal operation and should be quickly inserted into the reactor core by free drop under scram condition to shut down chain reactions. Therefore, the drop time of the CRA is one of important factors for the safety of the nuclear reactor and must be experimentally verified. This study presents the drop performance test of the CRA which has been conceptually designed for the Proto-type Generation IV Sodium-cooled Fast Reactor. During the test, the CRA was free dropped from a height of 1 m under different flow rate conditions and its drop time was measured. The results showed that the drop time of the CRA increased as the flow rate increased; the average drop times of the CRA were approximately 1.527 seconds, 1.599 seconds and 1.676 seconds at 0%, 100% and 200% of design flow rates, respectively.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.93-104
• /
• 2017

IMO type C independent tank is one of the cargo containment system specified on IGC code. It is normally adopted for small and medium size liquefied gas carrier's cargo containment system and it can be applied to fuel tank of LNG fueled vessel. This study focuses on rule scantling process and evaluation methods in early design stage of type C independent tank. Actual design results of 22K LPG/Ammonia/VCM carrier's No.2 cargo tank are demonstrated. This paper presents the calculation methods of design acceleration and liquid height for internal design pressure as defined on IGC code. And this paper shows the applied results of classification rules about shell thickness requirement and buckling strength. Additionally this paper deals with evaluation methods of structural strength and cumulative fatigue damage using FE analysis.

• 상하수도학회지
• /
• 제8권1호
• /
• pp.1-8
• /
• 1994

Laboratory experiments were conducted to investigate the effect of digestion temperature on the settleability and dewaterability of anaerobically digested sludge. The digesters were operated at a hydraulic retention time of 20 days with a loading rate of 0.63~0.66kg volatile solids per cubic meter per day at the temperature of $35^{\circ}C$ and $55^{\circ}C$. A mixed primary and secondary municipal sludge was used as a feed. The interface height of the sludge during settling test was recorded to identify settleability. As a measure of dewaterability of the sludge, specific resistance and capillary suction time were also measured with and without chemical conditioning. Higher digestion efficiency was obtained at $55^{\circ}C$ than $35^{\circ}C$. However, the settleability and dewaterability of the sludge at $35^{\circ}C$ were quite higher than those of the sludge digested at $55^{\circ}C$. The optimum dosages of ferric chloride for sludge conditioning were 0.4% and 0.6% at $35^{\circ}C$ and $55^{\circ}C$, respectively. The filtrate COD of the sludge digested at $55^{\circ}C$ was higher than at $35^{\circ}C$, which means that poor dewaterability of the sludge result in high filtrate COD.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1266-1270
• /
• 2020

A code is developed to correct for the coincidence summing effect in detecting a voluminous gamma source, and this code is applied to a¹⁵²Eu standard source as a test case. The source is 1000 mL of liquid in a cylindrical shape. To calculate the coincidence summing effect, the cylindrical source is considered as 10(radial) × 8(height) sectional sources. For each sectional source, the peak efficiency and total efficiency are obtained by Monte Carlo simulation at each energy for 10 energies between 50 keV and 2000 keV. The efficiencies of each sector are then expressed as polynomials of gamma energy. To calculate the correction coefficients for the coincidence summing effect, the KORSUM code is used after modification. The magnitudes of correction are 4%-17% for the standard ¹⁵²Eu source measured in this study. The relative deviation of 4.7% before the coincidence correction is reduced to 0.8% after the correction is applied to the efficiency based on the measured gamma line. Hence, this study has shown that a new method has been developed that is applicable for correcting the coincidence effect in a voluminous source, and the method is applied to the measured data of a standard ¹⁵²Eu cylinder source.

• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.411-418
• /
• 2020

A reformer is a device for producing hydrogen used in fuel cells. Among them, methanol steam reformer uses methanol as fuel, which is present as a liquid at room temperature. It has the advantage of low operating temperature, high energy density, and high hydrogen production. The purpose of this study is to improve the internal flow of the pressure vessel when a bundle of methanol steam reformer in the pressure vessel goes out to a single outlet. An analysis of equilibrium reaction to methanol steam reforming reaction was conducted using Aspen HYSYS^® (Aspen Technology Inc., Bedford, USA), and based on the results, computational analysis was conducted using ANSYS Fluent^® (ANSYS, Inc., Canonsburg, USA). For comparison of the results, the height of the pressure vessel, outlet diameter, and fillet was set as variables, and the optimum geometry was selected by comparing the effects of gravity and the amount of negative pressure.

• 마이크로전자및패키징학회지
• /
• 제14권2호
• /
• pp.1-8
• /
• 2007

LCD(Liquid Crystal Display) TV(Television) 용 백라이트의 광원으로서 면광원을 개발하였으며 이를 이용한 백라이트를 개발하였다. 백라이트의 광원으로 사용된 면광원은 유리성형을 통하여 채널을 형성하였으며 채널의 모양이 타원형 구조, 높이 4.4 mm, 채널의 실링 부위를 1.4 mm로 최적화된 면광원을 이용하여 제작한 백라이트의 성능을 향상시킬 수 있었다. 본 논문에서는 특히 면광원의 채널구조에 따른 백라이트의 휘도균일도의 변화에 대하여 연구하였으며 특히 광학 시뮬레이션을 통하여 면광원의 채널형상을 최적화 하였다. 채널의 구조가 최적화된 면광원을 이용하여 제작된 32", LCD TV의 휘도는 $576\;cd/m^2$ 이었다.