• Korean Journal of Animal Reproduction
• /
• v.21 no.2
• /
• pp.95-102
• /
• 1997

The studies on the carried out to investigate the effective concentration of cryoprotectant agents and sucrose by one-step straw method of bovine embryos. The follicular oocytes were cultured in TCM-199 medium containing 10 IU/ml PMSG(Sigma, USA), 10 IU/ml hCG(Sigma, USA), 1$\mu\textrm{g}$/ml $\beta$-estradiol(Sigma, USA) and 10% FCS for 24~48 hrs in incubator with 5% CO2 in air at 38.5$^{\circ}C$ and then matured oocytes were again cultured for 12~18 hrs with motile capacitated sperm by preincubation of heparin. The bovine embryos following dehydration by cryoprotective agents and various concentrations of sucrose were directly plunged into liquid nitrogen and thawed in 3$0^{\circ}C$ water. Survival and in vitro developmental rate was defined as devellpmental rate on in vitro culture or FDA-test. The results are smmarized as followes : 1. The high in vitro developmental rates of bovine frozen embryos after rapidly thawed in freezing medium was attained 2.0M glycerol, 2.0M DMSO, 1M or 2.0M propanediol. 2. The high in vitro developmental rates of bovine frozen embryos after rapidly thawed in freezing medium was obtained single cryoprotectant(6.7~17.4%) than mixed cryoprotectants(6.7~16.7%). 3. In vitro developmental rate of bovine embryos after rapid frozen-thawing in the freezing medium added 0.25M and 0.50M sucrose were higher cleavage rate than those of sucrose concentration of 0.75M and 1.00M. 4. The freezing methods on in vitro developemental rates of bovine embryos was attained slow freezing method(9.70~15.6%) higher than rapid freezing method(9.4~13.3%).

• Korean Journal of Animal Reproduction
• /
• v.21 no.2
• /
• pp.103-109
• /
• 1997

The studies on the carried out to investigate to determine the optimum thawing temperature and equilibration time and 1 step straw method of frozen bovine embryos. The follicular oocytes were cultured in TCM-199 medium containing 10 IU/ml PMSG(Sigma, USA), 10 IU/ml hCG(Sigma, USA), 1 $\mu\textrm{g}$/ml $\beta$-estradiol(Sigma, USA) and 10% FCS for 24~48 hrs in incubator with 5% CO2 in air at 38.5$^{\circ}C$ and then matured oocytes were again cultured for 12~18 hrs with motile capacitated sperm by preincubation of heparin. The bovine embryos following dehydration by cryoprotective agents and various concentration of sucrose were directly plunged into liquid nitrogen and thawed in 3$0^{\circ}C$ water. Survival and in vitro developmental rate was defined as developmental rate on in vitro culture or FDA-test. The results are summarized as followes : 1. The equilibration time on in vitro developmental rates of bovine embryos was attained after short period of time(2.5~5 min.) in the freezing medium higher than long period of time (10~20 min.). 2. The temperature thawed at 3$0^{\circ}C$ after rapid freezing of bovine embryos resulted in a significantly higher in vitro developmental rate than did at 2$0^{\circ}C$ and 35$^{\circ}C$. 3. The thawing time on in vitro developmental rates of bovine embryos was attained after short period of time(1~5 min.) in the freezing mediuim higher than long period of time(10min.). 4. The in vitro developmental rates of bovine embryos after rapid frozen-thawing by 1 step straw method in the freezing medium added 1.5M, 2.0M glycerol, DMSO, propanediol and 0.25M, 0.50M, 0.75M, 1.00M sucrose were 12.5~19.4%, 10.0~15.6%, 9.1~13.8% and 6.7~12.9%, respectively.

• 한국지역지리학회:학술대회
• /
• 2009.08a
• /
• pp.108-115
• /
• 2009

An increase in oil and gas plants caused by development of process industry have brought into the increase in use of flammable and toxic materials in the complex process under high temperature and pressure. There is always possibility of fire and explosion of dangerous chemicals, which exist as raw materials, intermediates, and finished goods whether used or stored in the industrial plants. Since there is the need of efforts on disaster damage reduction or mitigation process, we have been conducting a research to relate explosion model on the background of real 3D terrain model. By predicting the extent of damage caused by recent disasters, we will be able to improve efficiency of recovery and, sure, to take preventive measure and emergency counterplan in response to unprepared disaster. For disaster damage prediction, it is general to conduct quantitative risk assessment, using engineering model for environmentaldescription of the target area. There are different engineering models, according to type of disaster, to be used for industry disaster such as UVCE (Unconfined Vapor Cloud Explosion), BLEVE (Boiling Liquid Evaporation Vapor Explosion), Fireball and so on, among them.we estimate explosion damage through UVCE model which is used in the event of explosion of high frequency and severe damage. When flammable gas in a tank is released to the air, firing it brings about explosion, then we can assess the effect of explosion. As 3D terrain information data is utilized to predict and estimate the extent of damage for each human and material. 3D terrain data with synthetic environment (SEDRIS) gives us more accurate damage prediction for industrial disaster and this research will show appropriate prediction results.

• Advances in Energy Research
• /
• v.4 no.4
• /
• pp.299-323
• /
• 2016

Cylindrical parabolic solar concentrators of small concentration ratio are attractive options for working temperatures around $120^{\circ}C$. The heat gained can be utilized in many applications such as air conditioning, space heating, heating water and many others. These collectors can be easily manufactured and do not need to track the sun continuously. Using a heat pipe as a solar absorber makes the system more compact and easy to install. This study is devoted to modeling a system of cylindrical parabolic solar concentrators of small concentration ratio (around 5) fitted with a heat pipe absorber with a porous wick. The heat pipe is surrounded by evacuated glass tube to reduce thermal losses from the heat pipe. The liquid and vapor flow equations, energy equation, the internal and external boundary conditions were taken into consideration. The system of equations was solved and the numerical results were validated against available experimental and numerical results. The validated heat pipe model was inserted in an evacuated transparent glass tube as the absorber of the cylindrical parabolic collector. A calculation procedure was developed for the system, a computer program was developed and tested and numerical simulations were realized for the whole system. An experimental solar collector of small concentration, fitted with evacuated tube heat pipe absorber was constructed and instrumented. Experiments were realized with the concentrator axis along the E-W direction. Results of the instantaneous efficiency and heat gain were compared with numerical simulations realized under the same conditions and reasonably good agreement was found.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.9
• /
• pp.1281-1287
• /
• 2015

This study was performed to determine the effect of field pea silages which were the organic acid (OA) alternative of oregano and cinnamon essential oils on fermentation quality and aerobic stability. Whole crop pea was harvested at full pod stage and wilted in the laboratory at the 48 h. The chopped pea was mixed and divided into equal portions allocated to five groups: CON (non-treated), distilled water, denoted as control group; OA group, a mixture of 60% formic acid, 20% sodium formate and 20% water applied at a rate of 5 g/kg fresh forage (Silofarm Liquid, Farmavet); origanum (ORE) group, Origanum onites essential oil at 400 mg/kg fresh forage; cinnamon (CIN) group, cinnamon essential oil at 400 mg/kg fresh forage; origanum+cinnamon (ORECIN) group, a mixture of ORE and CIN applied at an equal rate of 400 mg/kg fresh forage. Cinnamon decreased acetic acid (AA), ammonia nitrogen ($NH_3-N$) and weight loss (WL) at the end of 60 days silage. Crude protein (CP) and dry matter (DM) increased by cinnamon essential oil. Yeasts were not detected in any treatments, including the control, after 7 days of air exposure. The $CO_2$ amount decreased and the formation mold was inhibited in the aerobic period by the addition of cinnamon oil. Oregano did not show a similar effect, but when it was used with cinnamon, it showed synergic effect on AA and during aerobic period, it showed antagonistic effect on mold formation and DM losses. It was found in this study that cinnamon can be an alternative to organic acids.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.42-48
• /
• 2003

LPG has been a broad concern of pro-environmental alternative fuel for vehicles. Recently, the new Liquid Phase LPG Injection(LPLI) system extends the limit of power of LPG engine and gives a chance to substitute LPG engine for diesel engine of heavy duty vehicles that are the main resources of air pollution in urban area. Large bore size of heavy duty LPG engine derives a serious knock problem. To find an optimal MBT conditions, it is necessary to know how the flame develops in the combustion chamber and find where the knock positions are. In this study. the ion-probe head gasket was used to estimate the knock position. Inverse operation of the ion-probe signal provides the flame developing characteristics. The further the position is from the spark plug, the later the flame arrives and the more times knock occurs. The main factor that effects knock position is inferred a flor situation of mixed gas in the combustion chamber.

• Journal of Powder Materials
• /
• v.20 no.4
• /
• pp.253-257
• /
• 2013

Freeze drying for porous Mo was accomplished by using $MoO_3$ powder as the source and camphor-naphthalene eutectic system as the sublimable material. Eutectic composition of camphor-naphthalene slurries with the initial $MoO_3$ content of 5 vol%, prepared by milling at $55^{\circ}C$ with a small amount of oligomeric dispersant, was frozen at $-25^{\circ}C$. The addition of dispersant showed improvement of dispersion stability in slurries. Pores were generated subsequently by sublimation of the camphor-naphthalene during drying in air for 48 h. To convert the $MoO_3$ to metallic Mo, the green body was hydrogen-reduced at $750^{\circ}C$, and sintered at $1100^{\circ}C$ for 2 h. The sintered samples, frozen by heated Teflon cylinder, showed large pores with the size of about 40 ${\mu}m$ which were aligned parallel to the sublimable vehicles growth direction. The formation of unidirectionally aligned pores is explained by the rejection and accumulation of solid particles in the serrated solid-liquid interface.

• Journal of Conservation Science
• /
• v.21
• /
• pp.33-40
• /
• 2007

The consolidation application of SILRES BS OH 100 was investigated, which has been used for consolidation of the weathered shale. The liquid SILRES BS OH 100 was polymerized by the sol-gel reaction with air moisture, and the XRD patterns showed that the gel was an amorphous solid. The drastic weight reduction of the sample was found by differential thermal analysis, which was followed to the formation of $Si(OH)_4$ particles. After consolidation, the polymerized gel was filled into the voids within the shale. The capillary water absorption of the consolidated shale was reduced to 48.7%, and the abrasive strength was improved.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.11
• /
• pp.1868-1874
• /
• 2007

We have developed a robotic system for an automated parallel cell cultivation process that enables screening of induction parameters for the soluble expression of recombinant protein. The system is designed for parallelized and simultaneous cultivation of up to 24 different types of cells or a single type of cell at 24 different conditions. Twenty-four culture vessels of about 200 ml are arranged in four columns${\times}$six rows. The system is equipped with four independent thermostated waterbaths, each of which accommodates six culture vessels. A two-channel liquid handler is attached in order to distribute medium from the reservoir to the culture vessels, to transfer seed or other reagents, and to take an aliquot from the growing cells. Cells in each vessel are agitated and aerated by sparging filtered air. We tested the system by growing Escherichia coli BL21(DE3) cells harboring a plasmid for a model protein, and used it in optimizing protein expression conditions by varying the induction temperature and the inducer concentration. The results revealed the usefulness of our custom-made cell cultivation robot in screening optimal conditions for the expression of soluble proteins.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.388-391
• /
• 1999

Well oriented Bi2212 superconductor thick films were formed successfully on a copper substrate by liquid reaction between a Cu-free precursor and Cu tape method in which Cu-free BSCO powder mixture was' printed on copper plate and heat-treated. And we examined the effect of heat-treatment atmosphere for the superconducting properties and microstructure of Bi2212. The composition of Cu-free BSCO powder mixture was Bi$_2O_3$ : SrCO$_3$ : CaCO$_3$ = 1.2~2 : 1 : 1 and the heat-treatment for the superconducting formation reaction was performed in air, oxygen, nitrogen and low oxygen pressure. At heat-treatment temperature, the printing layer partially melt by reacting with CuO of the oxidizing copper plate, and the nonsuperconducting phases present in the melt are typically Bi-free phases and Cu-free phases. Among the nonsuperconducting phases, it is known that the (Sr,Ca)CuO$_3$ phase restrain the formation of the Bi2212 superconducting phase. Because a kind of the nonsuperconducting phases is controled by the oxygen partial pressure, the optimum condition in which the remnants of the second phases don't leave in the fully processed conductor was determined by XRD and the critical tempera to re (Tc) analysis.