• E2M - 전기 전자와 첨단 소재
• /
• 제10권1호
• /
• pp.15-19
• /
• 1997

The characteristics of the response time and the viewing angle on twisted nematic (TN) liquid crystal display (LCD) and amorphous (a)-TN-LCD without rubbing were investigated. To measure the tansmission-voltage, response time, and viewing angle characteristics, we prepared three kinds of LC cells and then studied the surface liquid crystal alignment effect. It was found that the response time on A-TN-LCD was fast compared to the TN-I-CD, and the weak anchoring strength was attributed to the fast response time on a-TN-LCD. Also, we obtained the wide viewing angle characteristics on a-TN-LCD. The liquid crystal alignment of LCD device for electro-optical characteristics is discussed in the present paper.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.180-182
• /
• 1996

In this study, we have investigated the characteristics of the response time and the viewing angle on twisted nematic (TN)-liquid crystal display (LCD) and amorphous (a) TN-LCD without rubbing. To measure the transmission-voltage, response time, and viewing angle characteristics, we prepared three kinds of LC cells and then studied the surface liquid crystal alignment effect. We studied that the response time on a-TN-LCD is fast compared to the TN-LCD. We suggest that the weak anchoring strength is attributed to the fast response time on a-TN-LCD. Also, we obtained the uniform viewing angle characteristics on a-TN-LCD. From these results, we consider that the liquid crystal alignment on LCD device are very important factor for electro-optical characteristics.

• 광학세계
• /
• 통권98호
• /
• pp.60-66
• /
• 2005

프로젝터와 프로젝션 TV는 공통적으로 광학엔진내에 신호 처리된 영상 정보를 표시해주는 CRT(Cathode Ray Tube), LCD(Liquid Crystal Device), LCoS(Liquid Crystal on Silicon), 디지털 마이크로 미러 디바이스(Digital Micromirror Device;DMD)등의 디스플레이 소자가 사용된다. 최근 이러한 디스플레이 소자는 소형화·경량화 되어지는 추세에 있으며 무겁고 두꺼운 CRT보다는 LCD를 이용한 프로젝션 시스템들이 속속 출시되고 있다. LCoS 및 DMD를 이용한 시스템들도 출시 또는 개발되고 있는 실정이다. 특히, 현재까지는 LCD가 주류였지만, 고해상도 구현에 유리한 반면, 개발속도가 느린 LCoS에 비해 하이 콘트라스트(High Contrast) 구현에 탁월하고 개발 속도가 빠른 DMD를 이용한 프로젝션 시스템의 개발 및 출시가 주로 진행되고 있다.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.340-348
• /
• 2013

In Projection Stereolithography Apparatus (PSLA), Digital Micromirror Device (DMD) and Liquid Crystal Display (LCD) are used as a beam pattern generator. The DMD shows high resolution, but it is mostly applied in micro stereolithography due to high cost and fabricable area. In LCD, the size of pattern beam is freely controlled due to various panel sizes. The LCD, however, has some limitations such as short life time by the high power light source, non-uniform light intensity of pattern beam and low transmittance of UV-light. To solve these problems in LCD-based PSLA, a Scanbeam-SLA with LCD of 19 inches and visible LED-array is developed. In this system, the light module works like a scanner for uniform illumination. The system configuration, working principle and fabrication examples are addressed in this study.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.300-300
• /
• 2008

In this study, the advanced DuoPIGatron-type ion beam (IB) system was applied to inorganic thin film for aligning liquid crystal (LC). LC alignment on $Ta_2O_5$ via IB irradiation was embodied. As a result of IB irradiation, the homogeneously aligned liquid crystal display (LCD) on $Ta_2O_5$ was observed with low pretilt angles. The $Ta_2O_5$ were deposited on indium-tin-oxide coated Coming 1737 glass substrates by rf magnetron sputtering at $200^{\circ}C$. The deposition process resulted in forming very uniform thin film on glass substrates without any defects. To confirm the application of the inorganic alignment on modem display optical devices, we fabricated twisted nematic LCD and measured optical property and response time. As a result of the experiment, the electro optical characteristics of the LCD fabricated by using IB irradiation on $Ta_2O_5$ alignment layer were similar with the other LCD fabricated by using rubbing process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.166-168
• /
• 2009

We proposed a transflective liquid crystal display (LCD) with high aperture ratio using an electrophoretic particle layer (EPL). The transflective LCD consisted of the stacked LC layer and EPL which was acted as a switchable mirror under in-plane electrode structure. Without separation of reflective part and transmissive part in one pixel, a modeselectable display device can be obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.146-149
• /
• 2005

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, whichholds images in entire frame period, while impulsetype device generate image in very short time. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measureme.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1821-1826
• /
• 2009

Liquid crystal display (LCD) devices contain a colour filter which can visualise colour images by transmitting or absorbing light. Colour properties of LCD mainly depend on colour materials such as pigments and polymeric binders. In this paper, colour properties were studied to improve colour quality of LCD. Generally, the colour properties can be classified into three categories which are colour purity, brightness and contrast ratio. For this study, photo resists were prepared by treatment of pigments and synthesis of polymeric binder. The treated pigments were dispersed and formulated with additives for preparing a photo resist that could be used for manufacturing colour filters. As a result of what we studied, type, mixture ratio and concentration of pigments were very important to improve colour purity of LCD device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.62-62
• /
• 2007

It is analyzed with regard to LCD in Korea that national patent application, applicant patent application, IPC patent application. The Trends of patent application concentrated LCD manufacturing process and device, case and a cell of liquid crystal. Therefore, the future research and developments must be centralized these ranges. It is needed for competitive power and original technology that the search and analysis of the previous patent.

• 전력전자학회논문지
• /
• 제14권1호
• /
• pp.8-14
• /
• 2009

현재 사용하고 있는 LCD(Liquid Crystal Display) Backlight용 램프는 주로 CCFL(Cold Cathod Fluorescent Lamp)과 EEFL(External Electrode Fluorescent Lamp)이 사용되고 있다. 하지만 이 램프는 수은을 사용하여 RoHS(the Restriction of e use of certain Hazardous Substances in electrical and electronic equipment)규제가 점점 강화되면서 사용이 제한되고 있으며, 이에 따라 수은을 사용하지 않는 램프의 제작이 불가피해지고 있다. 또한 LCD TV는 CRT와 PDP와는 다른 LCD만의 Hold-type 특성과 LC(Liquid Crystal)의 응답속도로 인하여 Motion Blur현상이 나타나는 단점이 있다. 본 논문에서는 RoHS 규제를 만족시키는 무수은 면광원 램프를 구동하기 위한 인버터를 제안한다. 제안한 인버터는 포워드 방식을 사용하여 반도체 소자 및 자기 소자의 수를 줄여서 구동회로가 간단하다. 또한 면광원 램프를 세로방향으로 6블록으로 나누어 스캔구동을 하여 Motion Blur현상을 저감 시켰다. 끝으로 실험을 통하여 제안한 인버터의 유용성을 입증하였다.