• Journal of Oral Medicine and Pain
• /
• 제8권1호
• /
• pp.107-120
• /
• 1983

The Author had tried to classify lip print patterne of 380 persons aged from 3 to 71 for detecting possibility of individual identification. The results were as follows: 1. The incidency of lip print patterne by means of the Tsuchihashi modifiation method was high in type I, type Ⅱ,typeⅢ,type I`, typeⅣ, typeⅤ, respectively. 2. Any of lip print had no same shape. 3. No same shape of lip print was found even family members. 4. The shapes of lip prints were unchangeable in the period of 5 months.

• Tribology and Lubricants
• /
• 제14권2호
• /
• pp.21-25
• /
• 1998

This paper presents the experimental results of the friction characteristics of double liptype oil seals which show an improvement in sealing performance over single lip-type oil seals. The major differences between two oil seals are the number of contact lip, and seal materials; Nitrile Butadine Rubber(NBR) and urethane rubber. The measured results show that the friction torques of double lip seals show 12-17% increases compared with those of single lip-type seals. But the sealing performance and service life of double lip oil seals have been increased and stabilized due to an optimized design of the seal lip and material properties.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.265-268
• /
• 2003

In the extrusion process, the working material is forced to flow through a die with the desired profile. In general, the width of an extruded section is limited to about an inch less than the diameter of the round billet. But through the lip die, material is spreaded to produce a wider extruded section than the diameter of round billet. In this study, the extrusion process of an aluminum plate using the lip die is investigated. The width of the extruded plate is 450mm that is formed from the round billet with a diameter of 250mm. The flow characteristic through the lip die is considered to produce the wide-extruded plate with a small billet using rigid plastic FE analysis. Based on the result of FE analysis, new designs of lip die are proposed.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.165-172
• /
• 2001

Wheel bearing units were almost exclusively used for car front wheel, where the two ball rows are directly side by side with integrated rubber seal. The seal is of important for wheel bearing units due to the adverse environmental conditions with mud and splash water. The seal of wheel bearing units was designed to have geometry with multi lips, which elastic lip contacts and deforms with bearing. The equation of reaction force for deformed lip as cantilever beam was previously used for seal lip design. But it's result was not useful because deflection of the beam differs from lip's. In this study, deformed shape of the lip was assumed to and order function which is more similar to lip deformation and made the equation for reaction force prediction. The Reaction forces from each other equations were compared with results by FEA to prove usefulness of new equation.

• 대한구순구개열학회지
• /
• 제10권2호
• /
• pp.97-108
• /
• 2007

For many years a wide variety of surgical techniques for closure of cleft lip has been used. Still many surgeons prefer the Millard's rotation-advancement lip repair because the surgical scar is masked in the philtral crest and the nostril floor, and it improves the relationship of the alar base of the cleft side, producing harmonious symmetry of the nostril and the nostril sill. In addition, it uses and preserves the lip anatomy, returning lip tissue into its normal position, minimizing the amount of tissue that is discarded, and reconstructing the orbicular oris muscle. One of the major disadvantages of this procedure is the lack of accurate measurements. The object of this study is to help in the cleft lip surgery with investing its features and design.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.307-313
• /
• 1998

This paper presents the experimental results of the friction characteristics of double lip-type oil seals which show an improvement in sealing performance over single lip-type oil seals. The major differences between two oil seals are the number of contact lip and seal materials; Nitrile Butadine Rubber(NBR) and urethane rubber. The measured results show that the friction torque of double lip seals shows 12-17% increases compared with those of single lip-type seals. But the sealing performance and service life of double tip oil seals have been increased and stabilized due to an optimized design of the seal lip and material properties.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.115-119
• /
• 2004

In the extrusion process, the working material is forced to flow through a die with the desired profile. In general, the width of an extruded section is limited to about an inch less than the diameter of the round billet. But through the lip die, material is spreaded to produce a wider extruded section than the diameter of round billet. In this study, the extrusion process of an aluminum plate using the lip die is investigated. The width of the extruded plate is 450mm that is formed from the round billet with a diameter of 250mm. The flow characteristic through the lip die is considered to produce the wide-extruded plate with a small billet using rigid plastic FE analysis. Based on the result of FE analysis, an optimized design of the lip die is then proposed.

• 대한구순구개열학회지
• /
• 제8권2호
• /
• pp.95-105
• /
• 2005

Cleft lip and palate is a congenital deformity which needs a professional and consistent management from the birth and along with the physical growth of patients. The patients with cleft lip and palate can have general speech problems with resonance disorders, voice disorders and articulation disorders after the successful primary surgical management and the physical growth. Speech problems of Cleft lip and palate are characterized hypernasality, nasal air emission, increased nasal air flow, and aberrant speech marks which decrease intelligibility. These speech problems of cleft lip and palate can be treated with the secondary surgical procedure, the application of temporary prosthesis and the effective and well-timed speech therapy. The speech and language problems of cleft lip and palate, the general procedures and schedules of the speech assessment and therapy based on the multidisciplinary approach are introduced for the patients with cleft lip and palate, their family and the other members of the cleft palate treatment team.

• 대한구순구개열학회지
• /
• 제11권1호
• /
• pp.31-36
• /
• 2008

The variations of cleft lip deformities imposed the difficulty to the surgical correction for them. Straight line technique for cleft lip surgery has been ignored quite long since other techniques were developed. Initially the straight line technique was introduced and widely accepted because it is simple and easy to perform during the period of no adequate anesthetics. But it was abandoned for its several shortcomings such as tighten lip, vermilion notching, anatomical distortion, and wound contractures. Recently, some groups advocated the usefulness of straight line technique which has a significant modification from its original form. Additionally the variable degree of cleft lip deformity allows simple straight line closure for those patients. Here a case of simple straight line technique was presented and discussed for its reliability and plausible results as well.

• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.32-37
• /
• 1999

항시 장착이 가능한 reverse twin block 장치에 기능의 장애를 받지 않고도 lip pad의 효과를 첨가하기 위하여 가철식으로 lip pad를 제작하여 III급 부정교합의 치료에 적용해 본 결과 다음과 같은 결론을 얻었다. 1. Reverse twin block 장치는 장착한 상태에서 lip pad의 착탈을 통하여 정상적인 저작, 발음 등의 기능을 할 수 있으며 심미적이므로 III급 부정교합의 치료에 있어 상하악이 분리되어 있지 않은 다른 기능성 장치가 가진 단점을 극복할 수 있었다. 2. 본 증례에서는 저발육된 상악에 대한 효과적인 작용을 하는 lip pad를 가철식으로 제작하여 기능의 장애를 받지 않고도 양호한 치료효과를 얻을 수 있었다.