• The KIPS Transactions:PartA
• /
• v.14A no.4
• /
• pp.235-244
• /
• 2007

Caching and prefetching policies have been used in most of computer systems to compensate speed differences between primary memory and secondary storage devices. In this paper, we design and implement a Flash Cache Core Module(FCCM) on the YAFFS which operates on a file system layer for NAND flash memory. The FCCM is independent of the underlying kernel in order to support its stability and compatibility. Also, we implement the Dirty-Last memory replacement technique considering the characteristics of flash memory, and the waiting queue for pages to be prefetched according to page hit. The FCCM reduced the number of I/Os and the amount of prefetched pages by maximum 55%(20% on average) and maximum 55%(24% on average), respectively, comparing with caching and prefetching policies of Linux.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.66-72
• /
• 2008

In this study, transient 3D numerical simulations were performed to analyze the characteristics of fire driven flow for smoke ventilation system operating conditions in the deeply underground subway station. The smoke flow patterns were compared and discussed under smoke fan operating mode and off mode in the platform. Soongsil Univ. station(line number 7)was chosen for simulation which was the one of the deepest underground subway stations in the each lines of Seoul. The geometry for model is 365m in length include railway, 23.5m for width, 47m for depth. Therefore 10,000,000 structured grids were used for fire simulation. The parallel computational method for fast calculation was employed to compute the heat and mass transfer eqn's with 6 CPUs(Intel 3.0GHz Dual CPU, 12Cores) of the linux clustering machine. The fire driven flow was simulated with using FDS code in which LES method was applied. The Heat release rate was 10MW and The Ultrafast model was applied for the growing model of the fire source.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.209-215
• /
• 2018

In this paper, we propose a method to detect and block Meltdown malicious code which is increasing rapidly using dynamic sandbox tool. Although some patches are available for the vulnerability of Meltdown attack, patches are not applied intentionally due to the performance degradation of the system. Therefore, we propose a method to overcome the limitation of existing signature detection method by using machine learning method for infrastructures without active patches. First, to understand the principle of meltdown, we analyze operating system driving methods such as virtual memory, memory privilege check, pipelining and guessing execution, and CPU cache. And then, we extracted data by using Linux strace tool for detecting Meltdown malware. Finally, we implemented a decision tree based dynamic detection mechanism to identify the meltdown malicious code efficiently.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.99-105
• /
• 2023

In this paper, an intelligent CCTV was designed and experimentally developed by using an IOT device, Raspberry Pi, and artificial intelligence technology. Object Detection technology was used to detect the number of people on the CCTV screen, and Action Detection technology provided by OpenPose was used to detect emergency situations. The proposed system has a structure of CCTV, server and client. CCTV uses Raspberry Pi and USB camera, server uses Linux, and client uses iPhone. Communication between each subsystem was implemented using the MQTT protocol. The system developed as a prototype could transmit images at 2.7 frames per second and detect emergencies from images at 0.2 frames per second.

• Radiation Oncology Journal
• /
• v.16 no.1
• /
• pp.71-79
• /
• 1998

Purpose : The objective of this study is to introduce our installation of a non-commercial 3D Planning system, Plunc and confirm it's clinical applicability in various treatment situations. Materials and Methods : We obtained source codes of Plunc, offered by University of North Carolina and installed them on a Pentium Pro 200MHz (128MB RAM, Millenium VGA) with Linux operating system. To examine accuracy of dose distributions calculated by Plunc, we input beam data of 6MV Photon of our linear accelerator(Siemens MXE 6740) including tissue-maximum ratio, scatter-maximum ratio, attenuation coefficients and shapes of wedge filters. After then, we compared values of dose distributions(Percent depth dose; PDD, dose profiles with and without wedge filters, oblique incident beam, and dose distributions under air-gap) calculated by Plunc with measured values. Results : Plunc operated in almost real time except spending about 10 seconds in full volume dose distribution and dose-volume histogram(DVH) on the PC described above. As compared with measurements for irradiations of 90-cm 550 and 10-cm depth isocenter, the PDD curves calculated by Plunc did not exceed $1\%$ of inaccuracies except buildup region. For dose profiles with and without wedge filter, the calculated ones are accurate within $2\%$ except low-dose region outside irradiations where Plunc showed $5\%$ of dose reduction. For the oblique incident beam, it showed a good agreement except low dose region below $30\%$ of isocenter dose. In the case of dose distribution under air-gap, there was $5\%$ errors of the central-axis dose. Conclusion : By comparing photon dose calculations using the Plunc with measurements, we confirmed that Plunc showed acceptable accuracies about $2-5\%$ in typical treatment situations which was comparable to commercial planning systems using correction-based a1gorithms. Plunc does not have a function for electron beam planning up to the present. However, it is possible to implement electron dose calculation modules or more accurate photon dose calculation into the Plunc system. Plunc is shown to be useful to clear many limitations of 2D planning systems in clinics where a commercial 3D planning system is not available.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.319-330
• /
• 2001

In virtual memory system, when a process attempts to access a page that is not resident in memory, the system generates and handles a page fault that causes unpredictable delay. So virtual memory system is not appropriate for the real-time system, because it can increase the deadline miss ratio of real-time task. In multimedia system, virtual memory system may degrade the QoS(quality of service) of multimedia application. Furthermore, in general-purpose operating system, whenever a new task is dynamically loaded, virtual memory system suffers from extensive page fault that cause transient overloading state. In this paper, we present efficient overloading control mechanism called RBPFH (Rate-Based Page Fault Handling). A significant feature of the RBPFH algorithm is page fault dispersion that keeps page fault ratio from exceeding available bound by monitoring current system resources. Furthermore, whenever the amount of available system resource is changed, the RBPFH algorithm dynamically adjusts the page fault handling rate. The RBPFH algorithm is implemented in the Linux operating system and its performance measured. The results demonstrate RBPFH\`s superior performance in supporting multimedia applications. Experiment result shows that RBPFH could achieve 10%∼20% reduction in deadline miss ratio and 50%∼60% reduction in average delay.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.665-672
• /
• 2001

ITA (Information Technology Architecture) satisfies the requirements of information system, supports the information used in the institution's business to guarantee the interoperability and security, and analyzes the components of information system. ITA consists of EA (Enterprise Architecture), TRM (Technical Reference Manual) and SP (Standard Profile). The SP, one of the major components of ITA, is a set of information technology standards. In this paper, to construct and utilize the ITA, we mention the applications of information technology about the SP system implementation based on the TRM. The SP management system implemented in this paper is the first trial in Korea, and designs the software with object oriented programming languages such as JSP and Java. Moreover the basic and detailed specification based on the UML notation, system design using the component and system design pattern consisting of software architectures enhance the software reusability. And the constructed system in this paper shows less maintenance cost by using the public softwares such as Linux system, Korean DBMS, Apache and Tomcat, etc. Finally, the system includes the SP reference system which is used in the other institutions and cannot be found in other institutions. Also it includes the additional diverse service modules which support the subsequent processing for the establishment and revision of standards via internet.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.1-11
• /
• 2013

Dynamic Software Update(DSU) is a technique, which updates a new version of the software to a running process without stopping. Many DSU systems that update C application programs are introduced. However, these DSU systems differ in implementation method or in main features. In this paper, we propose a new DSU system that can solve some disadvantages of existing DSU systems. DSU system presented in this paper splits existing program to code, global data and local data and then updates each part of the program considering the characteristics of the respective parts. The proposed system in this paper is implemented and tested on Linux. Also, we compared our DSU system with other DSU systems and we could find some strength of our DSU system. First, the code memory usage of our DSU system can be efficient since our system does not need to maintain code of an old version. Second, the global data memory waste is small because our system does not need to allocate the global data again which is not modified in the new version. Finally, we restore local data of old version in stack area of the new version using stack reconstruction technique. This paper is meaningful since we proposed a new DSU method and we implemented a full DSU system using the method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.74-85
• /
• 2015

PCI Express is a well-known and widely used de-facto system bus standard for connecting among a processor and IO devices. PCI Express is originated from old PCI standard, and its most of applications are limited to be used within a PC or server system. But, because of its fast speed, low power consumption, and good protocol efficiency, it is considered as one of a good candidate for an alternate system interconnect for many years. In this paper, we present design, implementation and early evaluation of an alternate system interconnect by utilizing PCI Express. The developed alternate system interconnect using PCI Express (named PCIeLINK) utilizes non-transparent bridging (NTB) technic which generally used in fail-over system in PCI and PCI Express. By using NTB technic, PCI Express device can be extended to outside of a system without electrical and logical problems arising during system boot and enumeration. To build up an alternate system interconnect, we designed and implemented a network interface card having multiple PCI Express ${\times}4$ connections (theoretically 20 Gbps) and tested, The early test results revealed that an ${\times}4$ port in the card showed 8.6 Gbps peak performance for bulk transmission and 5.1 Gbps peak for normal TCP/IP transfer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1231-1236
• /
• 2014

Recently, diffusion and proliferation of mobile devices increases, per person n opens for the mobile device era. Mobile devices and OS types of continuously growing trend. More than 80% of market share with Google's Android and Apple's iOS as well as Samsung and Intel is developing TIZEN, Linux and Mobile was the UBUNTU which UBUNTU for Phone, UBUNTU touch, Mozilla 's Firefox OS, Microsoft 's windows mobile and many more OS are ahead of the launch. But different OS can share files between systems or technology is not. Bluetooth or WIFI Direct such technologies are present but can be transferred between compatible devices low, resulting in constraints file types also exist. In this paper, is equipped with a WiFi card in an environment where the Android mobile OS party this model and method for sharing files between different research and can share the file system based on research on.