• 복합신소재구조학회 논문집
• /
• 제3권2호
• /
• pp.19-27
• /
• 2012

Structural insulated panels, which are structurally performed panels consisting of a plastic insulation bonded between two structural panel facings are one of emerging products with a viewpoint of its energy and construction efficiencies. These components are applicable to fabricated wood structures. By now, there are few technical documents regulated structural performance and engineering criteria in domestic market. This study was conducted to suggest fundamental reports such as racking resistance, axial capacity, transverse load capacity, and lintel load capacity for SIPs. Test results showed that maximum load was 44.3kN, allowable load was 14.7kN for racking resistance, and that maximum load was 137.6kN, allowable load was 37.4kN/m for axial compression capacity. For transverse load capacity, test results showed $10.3kN/m^2$ of maximum load, $3.4kN/m^2$ of allowable load. For lintel load capacity for SIPs dependent to lengths, allowable loads were 20.4kN for 600mm long lintel, 23.9kN for 1,200mm long lintel, 19.3kN for 1,800mm long lintel, and 2,400mm long lintel had 14.1kN of allowable load. In the near future, when the allowable load for wall application is established, SIPs is considered to substitute the existent post-and-lintel construction to bearing wall structure.

• 한국공간구조학회논문집
• /
• 제17권4호
• /
• pp.77-84
• /
• 2017

As an alternative to coupling beam in shear wall system, application of the damper which can dissipate energy is increasing. In this study, lintel beam type steel damper which is simple to construct and change depending on design load was proposed. Cyclic loading test was conducted to compare reinforced concrete coupling beam and lintel beam type steel damper. The test results showed that lintel beam type steel damper has higher initial stiffness and energy dissipation capacity than reinforced concrete coupling beam.

• 대한안전경영과학회지
• /
• 제15권3호
• /
• pp.29-35
• /
• 2013

The research is to verify by experiments whether the steel truss structure is able to withstand the load of cement bricks of upper part of a door for the safe use of lightweight steel truss structure instead of concrete lintel which is to be installed at upper part of door frame in building cement bricks for apartment construction. The steel truss is designed in order not to disturb bricks-building and the shape of structure was verified by bending test. According to experiments result, camber was applied to steel structure that enabled construction work to be improved and was proved effective for the prevention of accidents by cement bricks-building load test.

• 한국화재소방학회논문지
• /
• 제25권3호
• /
• pp.91-98
• /
• 2011

이 연구는 전통 벽체 형식으로서 중인방을 포함한 목골조 경량벽체의 내화성능에 대한 것이다. 대상으로 한 경량벽체는 $38{\times}89$ mm($2"{\times}4"$) 목재를 골구로 하고 방회석고보드로 마감하는 형식의 비내력구조 이다. 벽체의 중간부에는 $150{\times}150$ mm 단면의 집성목 중인방을 설치하였다. 실험체는 단열재 유무 등에 따라 3가지 타입으로 제작하였다. 내화실험 결과 실험체-1, 2, 3 모두 90분 이상의 내화성능을 확보하는 것으로 나타났고, 각각 92분, 98분, 99분만에 중인방의 측면과 하부에서 불꽃이 발생하여 실험을 중단하였다. 가열면의 방화석고보드($12.5mm{\times}2$겹)는 약 45분간 내화성능을 유지하는 것으로 나타났고, 중인방의 연소는 일반적인 목재의 탄화속도와 유사한 거동을 보였다 벽체 내부의 목재스터드는 방화석고보드의 기여로 연소가 지연되는 동안 탈수가 일어나 고온에 노출된 이후에는 수분에 의한 온도상승 지연효과가 일어나지 않고 비교적 빠른 연소가 진행되는 것으로 나타났다.

• 한국지진공학회논문집
• /
• 제14권6호
• /
• pp.55-65
• /
• 2010

본 실험 연구의 목적은 횡방향 정적가력을 통하여 2층 R.C 전단벽식 구조의 내진성능을 평가하는 것이다. 본 연구의 실험체는 대상 건물의 개구부를 가지는 T자형 벽체 1층과 2층의 일부분을 대상으로 실물크기의 3/5 크기정도로 축소하였고, 인방보의 유 무를 실험변수로한 2개의 실험체를 제작하여 횡방향의 정적가력 실험을 수행하였다. 인방보 유무에 따른 벽체의 구조적 성능 및 거동의 차이를 비교한 결과, 인방보가 있는 실험체가 인방보가 없는 실험체보다 최대내력과 연성능력 등의 내진성능이 우수한 것으로 판단되었다.

• 건축역사연구
• /
• 제21권1호
• /
• pp.99-118
• /
• 2012

This study aims to classify the architectural formation of the Stylobate of and Staircase types of Post-Lintel Construction in Backje style and Silla style and also to figure out their specific elements by periods and transformation characteristics. The scope of this study was restricted to architectural remains between the Three Kingdom period and the Goryeo period. To progress the investigation, the study classified remains in a similar type by period and type, and then and analyzed its character based on formation method and specific factors of subsidiary materials. As a result, its type can be classified as Backje type(I), Silla type(II) and Mixed type(III). Regionally, it is found that Woongjin, Sabi and surroundings in the capital of Backje, Gyeongju and main towns in the capital of Silla, and Gaeseong and main towns in the capital of Goryeo. In particular, type III has the characteristics of type I and II simultaneously, which has one or two layers Jangdaeseok stone between the foundation stone of stylobate and plate stone, and tends to be decorative when Taengjuseok stone is installed. For types of staircase, it could be classified as 6~7C Backje type(I), 7~9C Silla type(II) and 9C Mixed type(III) according to the formation method of Somaetdol (banister of stone stair). And from the 9th century on, decorated Somaetdol stone type(IV) of 1/4 circle shape began to appear. The common feature of stylobate of post-lintel and staircase is that it became simplified, abbreviated and decorative. It seems to be intended to secure simplicity of construction or structural stability.

• Earthquakes and Structures
• /
• 제13권4호
• /
• pp.409-419
• /
• 2017

In order to analyze the vibration control effect of viscous damper in the concrete archaized buildings with lintel-column joints under seismic action, 3 specimens were tested under dynamic excitation. Two specimens with viscous damper were defined as the controlled component and one specimen without viscous damper was specified as the non-controlled component. The loading process and failure patterns were obtained from the test results. The failure characteristics, skeleton curves and mechanical behavior such as the load-displacement hysteretic loops, load carrying capacity, degradation of strength and rigidity, ductility and energy dissipation of the joints were analyzed. The results indicate that the load-bearing capacity of the controlled component is significantly higher than that of the non-controlled component. The former component has an average increase of 27.4% in yield load and 22.4% in ultimate load, respectively. Meanwhile, the performance of displacement ductility and the ability of energy dissipation for the controlled component are superior to those of the non-controlled component as well. Compared with non-controlled component, equivalent viscous damping coefficients are improved by 27.3%-30.8%, the average increase is 29.0% at ultimate load for controlled component. All these results reflect that the seismic performance of the controlled component is significantly better than that of the non-controlled component. These researches are helpful for practical application of viscous damper in the concrete archaizing buildings with lintel-column joints.

• 콘크리트학회논문집
• /
• 제22권6호
• /
• pp.805-816
• /
• 2010

축소모델의 지진모의실험을 위해서는 실물 실험체의 구조거동을 축소모델 실험체가 잘 모사하는지 상사성 확인이 필수적이다. 본 논문에서는 2층 RC 벽식구조 실험체의 반복 횡가력 실험을 통해 강도, 연성과 같은 전체거동과 휨, 전단, 들뜸과 같은 국부거동의 결과를 나타내었다. 인방보의 유무에 따른 3 : 5 실물 실험체와 1 : 7 축소모델 실험체를 비교 분석 하였으며, 1 : 7 축소모델 실험체가 실물 실험체의 전체거동과 국부거동에 대해서 대체로 잘 모사하고 있음을 확인하였다.

• 건축역사연구
• /
• 제28권5호
• /
• pp.27-41
• /
• 2019

This study covered the features and development process of the stylobate of the Sumijwa style, which emerged in Silla around the late 7th century. In the Period of North and South Dynasties, Sumijwa was used as the seat of the Buddha. It was used as a stylobate of tower in the Sui Dynasty and as a stylobate of central buildings in the Tang Dynasty, raising the status of buildings. In the late 7th century, Silla faithfully embodied Buddhist view of the world under its architecture by accepting the latest stylobate of the Sumijwa style. The pagoda of Hwangnyongsa Temple is believed to be the beginning of the stylobate of the Sumijwa style, in Silla. Gradually, in the central buildings within the capital, the stylobate of the Sumijwa style became common. Starting with Bulguksa Temple's Daeungjeon Hall, the materials of stylobate and staircaes will be integrated from the late 8th century. Silla's stylobate of the Sumijwa style can be evaluated as a step-by-step leap in religious, political, technical and aesthetic's terms.

• 비교문화연구
• /
• 제22권
• /
• pp.177-201
• /
• 2011

The Lord of Mayan society was a person who was thought to be able to understand phenomena in the universe. And also the Lord could realize these activities of heaven on Earth through ritual. But the manifested ritual function of lordship was very different depends on Classic and Postclassic period. The Classic Mayan rituals were closely related to personal dignity, specially royal blood tradition meanwhile the Postclassic Mayans focused on public function of ritual. The ritual sacrifices of blood letting from their own body, manifested in Yaxchilan Lintel 24, 25 and 17, were focused on royal family's activity, showing the dignity of royal blood. The same ritual about the birth of family successor was observed at the Structure 5C4 from Postclassic ruin of Chichen Itza. However, this scene in focus, was two representative men and the answer of ancestor, not a special person. Also at the Lintel 1 of Temple of Four Lintels it was observed names of four Lords of Chichen Itza, their relationship, their action of firing to dedicate temple instead of writing long history of great royal family. All above shows that during Postclassic period the lords preferred a public function of their lordship than to dignify some royal persons through ritual.