• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.2
• /
• pp.189-217
• /
• 2017

Declaration of Air Defense and Identification Zones started with the United States in 1950, which was followed by declaration of KADIZ by the Republic of Korea in 1951. Initial ADIZ were solely linked with air defense missions, but their roles have changed as nations around the globe manifested a tendency to expand their influence over maritime resources and rights. In particular, China declared ADIZ over the East China Sea in October 2013 and forced all passing aircraft to submit flight plan to ATC or military authority, saying failure of submission will be followed by armed engagement. China announced it would declare another zone over the South China Sea despite the ongoing conflict in the area, clearly showing ADIZ's direct connection with territorial claim and EEZ and that it serves as a zone within which a nation can execute its rights. The expanded KADIZ, which was expanded in Dec 15, 2013 in response to Chinese actions, overlaps with the Chinese ADIZ over the East China Sea and the Japanese ADIZ. The overlapping zone is an airspace over waters where not only the Republic of Korea but also of China and Japan argue to be covering their continental shelf and EEZ. Military conventions were signed to prevent contingencies among the neighboring nations while conducting identifications in KADIZ, including the overlapping zone. If such military conventions and practice of air defense identification continue to be respected among states, it is under the process of turning into a regional customary law, although ADIZ is not yet recognized by international law or customary law. Moreover, identification within ADIZ is carried out by military authorities of states, and misguided customary procedures may cause serious negative consequences for national security since it may negatively impact neighboring countries in marking the maritime border, which calls for formulation of operation rules that account for other state activities and military talks among regional stake holders. Legal frameworks need to be in place to guarantee freedom of flights over international seas which UN Maritime Law protects, and laws regarding military aircraft operation need to be supplemented to not make it a requirement to submit flight plan if the aircraft does not invade sovereign airspace. Organizational instructions that require approval of Chairman of Joint Chiefs of Staff for entrance and exit of ADIZ for military aircraft need to be amended to change the authority to Minister of National Defense or be promoted to a law to be applicable for commercial aircraft. Moreover, in regards to operation and management of ADIZ, transfer of authority should be prohibited to account for its evolution into a regional customary law in South East Asia. In particular, since ADIZ is set over EEZ, military conventions that yield authority related to national security should never be condoned. Among Korea, China, Japan and Russia, there are military conventions that discuss operation and management of ADIZ in place or under negotiation, meaning that ADIZ is becoming a regional customary law in North East Asia region.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.29-35
• /
• 2011

PHR(Personal Health Record) to support the lifelong healthcare of their medical information to consumers anytime, anywhere can view and manage health information to help direct input can be defined as a service. The PHR is to provide services efficiently and PHR systems and health-related information systems should be integrated and linked. However, the current healthcare information systems field in order to meet the growing demand for healthcare construction and operation of various systems, and accordingly continues to increase budget for information, but the current system, although the association between a variety of system integration and linkage is being made. This paper proposes a Integrated information system on Healthcare based on Web service to solve problems mentioned above. SOA(Service Oriented Architecture) is a major method of integrating services on the Web. It enables new requirements to be added to existing systems without modification of legacy services, so it makes rapid adaption to varying business environment. Therefore, In this paper, PHR services based on SOA as a platform for the health care sector to design and implement an integrated information system by web services based PHR services for the construction of a new integrated information system is proving to be a suitable model.

• The KIPS Transactions:PartD
• /
• v.17D no.4
• /
• pp.259-270
• /
• 2010

Information systems nowadays are heterogeneous and distributed which integrate the enterprise information by processes. They are also very complex, because they are linked together by processes. It aims to integrate the systems so that these systems work as one system. A process is a framework which contains all of the business activities in an enterprise, and has a lot of information which is needed for measuring performance. A process consists of activities, and an activity contains events which can be considered information sources. In most cases, it is very valuable to determine if a process is meaningful, but it is difficult because of the complexity in measuring performance, and also because finding relationships between business factors and events is not a simple problem. So it would reduce operation cost and allow efficient process execution if I could evaluate the process before it ends. In this paper we propose an event based process measurement model. First, we propose the concept of process performance measurement, and a model for selecting process and activity indexes from the events which are collected from information systems. Second, we propose at methodologies and data schema that can store and manage the selected process indexes, the mapping methods between indexes and events. Finally, we propose a process Performance measurement model using the collected events which gives users a valuable managerial information.

• International Commerce and Information Review
• /
• v.18 no.3
• /
• pp.3-21
• /
• 2016

The thesis examines genealogical study of various aspects to overcome lots of problems which come by when we execute SWIFTNet TSU BPO. Practical implications regarding the innovation of electronic trade infrastructure are as follows. First, the shipping documents in the SWIFTNet TSU BPO are directly sent to an importer by an exporter after the baseline is confirmed. With this process itself, therefore, the bank cannot secure the account receivable. When initiating the SWIFTNet TSU BPO deal, it is needed to set regulations on the bank's account receivable security in the contract. Second, the SWIFTNet TSU BPO should also have an institutionally unified sharing platform with security, stability and convenience. It other words, it is needed to develop services which meet e-payment paradigm and international environments through continued analysis on market changes and flow. Third, the SWIFTNet TSU is useful in terms of promptness, reduction of risk in foreign exchange payment, cost reduction. Therefore, the SWIFT should be perfectly united and linked among the banks, importer and exporter to make the SWIFTNet TSU more convenient in countries around the world. Fourth, the SWIFT should be approached from the aspect of expansion of network and creation of a new business model through analysis on these problems with a worldwide perspective. At the same time, it is necessary to build a cooperative system to share information and promote comprehensive management for efficient operation.

• Archives of Reconstructive Microsurgery
• /
• v.8 no.1
• /
• pp.35-43
• /
• 1999

There are lots of reconstructive ways like direct closure, skin graft, local flap, regional flap, distant flap, free flap and so on. Microsurgical reconstruction is regarded as the last step in various reconstructive methods. So the failure of this last step causes the troublesome situation for both of patients and surgeon. The purpose of this paper is to investigate the problems in failed free flap surgery and to introduce the strategy of appropriate management in wound of free flap failure. We performed 252 cases of free flap surgeries from May, 1988 to June, 1998. Among these cases, we failed 9 cases of free flaps. Patients' age ranged from 19 to 63. There were 7 males and 2 females. Site of failure were 3 head and neck areas, 2 hands, and 4 lower extremities. However there was no failure in breast, trunk, buttock, and genitalia. 7 patients who had region of head and neck, and lower extremity underwent the second free flap surgery successfully in postoperative 4 to 16 days following debridement of necrotic tissue. However 2 patients who had region in hand were managed with conventional treatment like skin graft and distant flap. Vein grafts were needed in 3 cases of 7 second free flaps, and 1 patients needed sequentially-linked free flaps with two flaps. The second free flaps were inevitable for head and neck area because the large complex wound may cause the lifethreatening condition without immediate coverage with well vascularized flap. Lower extremity also needed second free flap for limb salvage. Hand could be managed with conventional method, even though healing time was quite delayed. We thought second free flap surgery in free flap failure cases should be performed with more careful preoperative evaluation and refined surgery. Success of second free flap surgery could recover the very difficult situation due to previously failed operation.

• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.420-426
• /
• 2017

Recently, solvent-resistant nanofiltration membranes have been studied for the separation of solvents or solutes using a molecular weight cut-off system of the polymer which is resistant to a specific solvent. Required conditions for these membranes must have are excellent physical properties and solvent resistance. Polybenzimidazole, which is known to be one of the most heat-resistant commercially available polymers, has an excellent inherent solvent resistance and it is even insoluble in stronger organic solvents when cross-linked. Therefore, in this study, the applicability of polybenzimidazole as a solvent resistant nanofiltration membrane was discussed. The membrane was fabricated using the non-solvent induced phase separation method and showed a suitable morphology as a nanofiltration membrane confirmed by field emission scanning electron microscopy. In addition, the permeance of the solvent in the presence or absence of cross-linking was investigated and the stability was also confirmed through long operation. The permeance test was carried out with five different solvents: water, ethanol, benzene, N, N-dimethylacetamide (DMAc) and n-methyl-2-pyrrolidone (NMP); each of the initial flux was $6500L/m^2h$ (water, 2 bar), $720L/m^2h$ (DMAc, 5 bar), $185L/m^2h$ (benzene, 5 bar), $132L/m^2h$ (NMP, 5 bar), $65L/m^2h$ (ethanol, 5 bar) and the pressure between 2 and 5 bar was applied depending on the type of membrane.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6427-6433
• /
• 2013

For trains to run safely and quickly, the train should always follow the preceding train at a proper spacing. For this purpose, a certain distance between the stations is set for each block section. For the safe operation of trains in one block section, only one train service for an automatic block system is needed. The existing block system is composed an ABS, which is a linked track circuit and line sideway system through the interlocking system. The interlocking system is being replaced with a domestic electronic interlocking system. On the other hand, the block system still uses the relay format of an analog system, and is independently installed of the line sideway systems. Therefore, the existing block system has many problems in terms of construction and maintenance. In addition, the existing domestic line is used for ABS and LEU , which is installed separately, despite the train being controlled by the information of the same signal at the same location. This is not efficient in terms of each product price and the maintenance costs. This paper introduces an integrated electronic block system and the field test results. The field test was carried out through a periodic inspection performed eight times from January to late August.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.616-622
• /
• 2016

The heating load using solar hot water is lower in summer than in the other seasons. This decreased heating load leads to the overheating solar collectors and related components. To prevent overheating of the solar collectors, air cooling and shading shields were used. On the other hand, it requires additional mechanical components, and reduces the system reliability. The geothermal heat dump system to release the high temperature heat (over $150^{\circ}C$) transferred from the heat pipe solar collectors was investigated in the present study. Research on the heat dump to cool the solar collector is rare. Therefore, the present study was carried out to collect possible data of a geothermal heat dump to cool the solar collector. A helical type geothermal heat exchanger was buried at a 1.2m depth. Experimentally and numerically, the geothermal heat dump was investigated in terms of the effects of parameters, such as the quantity of solar radiation, aperture area of the collector and the mass flow rate. A pipe length of 50m on the geothermal heat exchanger was suitable with a 0.33 kg/s flow rate. The water reservoir was a possible co-operation solution linked to the geothermal heat exchanger.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.772-779
• /
• 2019

The subsea pipeline has received considerable attention as a high-value-added industry linked to the energy and steel industries including natural resource development. The design and installation of the subsea pipeline require a variety of key technologies to carry out the project. In particular, a thorough pre-verification process through pre-commissioning is essential for the safe operation of the subsea pipeline. The hydrotesting stage in the pre-commissioning process of the subsea pipeline is known to be affected significantly by the ambient temperature change; however, there is a little study based on the theoretical and numerical approach. In this study, the method of predicting the internal temperature change using the transient heat transfer method for the stage of hydrotesting during the pre-commissioning process of the subsea pipeline and the prediction method of the pressure variation in the pipeline using it were proposed. The predicted results were compared with field test results and its effectiveness was verified. The proposed analysis procedure is expected to contribute to the productivity improvement of the subsea pipeline installation project by enabling the prediction of pressure variation through pipeline heat transfer simulation from the initial design stage of the subsea pipeline installation project.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.3
• /
• pp.25-35
• /
• 2006

Standardization or standard-related study are regarded as main issues in GIS applications. Though several GIS standards and specifications have been released, there are a few actual application cases adapting those. In this study, we designed and implemented a geo-spatial information processing system with editing, storing, and disseminating functions, in which standard GIS transportation data model by TTA linked with OGC-GML, XML-based geographic features encoding standard. The system developed in this study enables us to transfer and edit transportation entities based on TTA standards to GML, importing ESRI shapefile. In web-based system, GML-based databases are transformed to SVG file, for the purpose of web publishing. TTA GIS transportation data model is used in this study, and tested; however, standard data models from other application fields also can be easily applied because this system basically provides data importing and editing functions. This system as practical tools can be utilized for applicability test of GIS standard data model and practical operation of standard specification.